Rust-Oleum CombiColor is the ultimate direct to metal paint: Apply to bare, manually derusted or ready primed mild steel Over 400 colour options Primer and metal topcoat in one Interior/exterior use Sag resistant - leaves no brush/roller strokes Use Rust-Oleum 3302 CombiPrimer Adhesion first on bare Galv, Zinc and Aluminium...
Sherwin-Williams Dura-Plate UHS
Sherwin-Williams Dura-Plate UHS is a fast curing solvent free epoxy lining coating which rapid return to service and high build, edge retentive properties of tank lining provides superior protection compared to conventional approaches or alternative products. Dura-Plate UHS is the user friendly solution for use in tanks containing a wide range of contents from crude oil to potable water.
The rapid return to service and high build, edge retentive properties of this superior tank lining provide superior protection. Sherwin-Williams Dura-Plate UHS can be applied by conventional airless pumps in a single coat. It is the user friendly solution that matches the need for fast curing & top performance for use in tanks containing a wide range of cargos from crude oil to potable water or ethanol.
Sherwin-Williams Dura-Plate UHS is for use over prepared steel or concrete surfaces in industrial and marine exposures such as:
- Meets MIL-PRF-23236, Type VII, Class 5, 7, 9 and 11, Grade C
- Ballast tank interiors, Oil storage tank interiors, Refined fuel storage tank
- Portable water tanks interiors and pipe (Certified to NSF/ANSI 61)
- Water and waste treatment plants
- Primary and secondary containment areas
- Where edge protection film build properties are required
- Suitable for use with cathodic protection systems
Sherwin-Williams Dura-Plate UHS superior performance results from the combination of an advanced amine curing system with the perfectly engineered film rheology. The curing concept provides high chemical resistance and excellent barrier properties. The rheology allows enhanced edge retention features which maximise the coverage of edges and weld areas.
Easier & Faster Application
Sherwin-Williams Dura-Plate UHS is designed for easy application; its user friendly nature arises from a rheological behaviour allowing smooth spraying and film forming associated with an extended pot life well suited for use with single pump airless spray equipment. Single coat application is possible thanks to its high build and solvent-free nature.
Faster & Safer Inspections
When enhanced with Opti-CheckTM – Optically Activated Pigments (OAP) technology, Dura-Plate UHS can be easily and thoroughly inspected for holidays, pinholes, and low film thickness. This allows applicators to correct issues quickly prior to service.
Low VOC and low odour, this coating has a reduced environmental impact and is safer during application due to its high flash point, making it well suited for onsite application with minimal disruption of other work fronts in the same project.
- Fast curing to service +/- 4 days
- Single Coat application
- Opti-CheckTM (OAP) technology
- Enhanced edge retention properties
- Chemical & abrasion resistance
- Low odour, low voc.
- Reduced plant downtime and costs
- Reduced application time and costs
- Faster and more thorough inspection
- Good edge and weld coverage
- Prolong service life
- Preferable towards environmental regulations.
Sherwin-Williams Dura-Plate UHS has been instrumental in replacing the use of conventional solvent-borne epoxies for both Marine, Oil & Gas tank applications since the late 90s. Whilst pioneering 20 years service life expectation when applied to ballast tanks at the US Navy, Dura-Plate simultaneously became the crude oil storage lining of choice, and has been expanding it’s dominance within the marketplace. Now available worldwide, Dura-Plate UHS is being adopted by an increasing number of industries and geographies.
- Oil & Gas: Refineries, terminals and pipelines, offshore
- Power: Fuel tanks, nuclear industry
- Marine: Dedicated crude storage tanks and dedicated water ballast tanks
- Infrastructures & industrial: Water & waste water treatment plants and storage, storage tanks.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 2.2m² per litre
- Touch Dry
- 5 Hours
- Brush, Roller, Spray
Be the first to ask a question about this product!
Jotun Jotamastic SF Alu is a two component polyamine cured epoxy mastic coating aluminium pigmented to provide a metallic silvery finish that is a surface tolerant, solvent free, high build product well suited for early immersion. Specially designed for areas where optimum surface preparation is not possible or desired.
This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. This product is available as POA. Click here to email us for more information. Top Features Versatile coating with wide chemical resistance...
A water-resistant epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry. This HAR version of Plasite 7159 is extremely abrasion resistant. Top...
The Zinga film galvanising system in the convenience of a 500ml aerosol spray can. Use to repair or touch up galvanising, damaged or old hot-dipped, other zinc coated structures or products previously treated with Zinga in marine structures, new steel and galvanising, cast-iron and aluminium alloys. Repair for worn or damaged hot-dip...
A high performance, 100% solids structural polyurethane designed to repair Polyclad 777 or 777 PL when it has been damaged. Top Features Low temperature cure Quick cure to handle Superior wetting properties and outstanding adhesion to steel Excellent edge retention
An all-purpose immersion-grade epoxy that has a variety of attributes including low-temperature cure, surface tolerance and fast recoat times. Can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Top Features Excellent corrosion protection Excellent application characteristics Fast...
A high solids corrosion resistant primer or intermediate coat on concrete, steel and (in)organic zinc primers. Top Features Excellent corrosion protection. Excellent film build and edge protection. VOC compliant to current AIM regulations.
A high performance tank lining with curing characteristics allowing the coating to be applied and cure at temperatures as low as 35°F (2°C) while achieving unmatched chemical resistance in caustic, acid, solvent and ethanol service. Formulated for use in a large variety of facilities including waste water, chemical and fuel storage, wet-gas...
Nu-Steel SP Anti Corrosive Primer/Undercoat is a high performance phosphate primer that is perfect for external metal structures that are exposed to the elements. Advantages High performance primer and undercoat. First class adhesion. 8-10m²/Litre average. 12-month shelf life.
Cromadex 280 One Pack Eggshell Primer Finish is a one pack eggshell primer finish suitable for both interior and exterior use. The product contains zinc phosphate giving added corrosion resistance for greater durability. It is a high build product making it suitable for application over shotblasted steel. Cromadex 280 is available in full Cromadex range...
An epoxy lining for “dry” natural gas transmission pipelines. It is designed to increase flow efficiency of natural gas in pipelines. It fully meets criteria of API RP 5L2 for gas transmission pipelines. Top Features Improves flow efficiency in gas pipes Excellent flow and leveling Single-coat application Hard, smooth, glossy finish
Cromadex 290 One Pack Gloss Primer Finish is a one pack gloss primer finish suitable for both interior and exterior use. The product contains zinc phosphate giving added corrosion resistance for greater durability. Cromadex 290 is available in full Cromadex range of colours, including BS, RAL, and special matches all in a lead free finish.
Jotun Jotamastic 90 GF WG is a 'Wintergrade' version of Jotamastic 90 GF to aid application in lower temperatures and to provide faster drying and curing times. It is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high solids, high build product. It is reinforced with glass flakes for improved abrasion...
Confirming to BS 3416 and BS 6949, Type 1 Class A, this solar reflective bitumen coating is perfect for steel, non-ferrous metals, concrete, brick and asphalt, where a tough waterproof coating is required on surfaces. Advantages Hard-wearing gloss finish Repels water fast-drying High build coating
A two-pack, glossy epoxy for metal, walls and floors. It is the most efficient epoxy system providing a very hard coating with high layer thickness giving lasting results with even a single coat application.