Jotun Jotacote Universal N10 is specially designed as a universal, all round, all year, new building coating where fast dry to handle times are required. Jotun Jotacote Universal N10 can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments and is replacing the current Jotacote Universal product.
Jotun Jotacote Universal N10 is a two component polyamine cured pure epoxy coating that is a fast drying, abrasion resistant, high solids, high build product. It is specially designed as a universal, all round, all year, new building coating where fast dry to handle times are required. Jotun Jotacote Universal N10 can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. It is suitable for properly prepared aluminium, carbon steel, galvanised steel, shop primed steel and stainless steel substrates and can be applied at sub zero surface temperatures.
Typically used on exterior and interior areas, including outside hulls, superstructures, decks, cargo holds and water ballast tanks. Jotun Jotacote Universal N10 has very high flexibility making it specially suitable for the temperature variation experienced in crude oil, chemical and shuttle tankers. Approved for PSPC cross over testing with a wide range of shop primers.
Approvals and Certificates
Approved for PSPC for Water Ballast Tanks according to IMO Res. MSC 215(82)
Approved for PSPC for Crude Oil Tanks according to IMO Res. MSC 288(87)
Approved for IMO FTPC Part 2 and 5, MSC 61(67), for paint systems with low flame spread characteristics
Additional certificates and approvals may be available on request.
Features & Benefits
Full universality
IMO PSPC for WBT/COT approved
Lower VOC
Fast drying
Low temperature applicable
Full Universality
Can be used on all-round vessels including cargo holds, water ballast tanks, crude oil tanks, outside hull, superstructure
PSPC for water ballast tanks according to IMO Res. MSC 82 (215)
PSPC for crude oil tanks according to IMO Res. MSC 288 (87)
When the approved BWTS systems are operated correctly and the active species’ concentration is not above 10 ppm, no detrimental effect on correctly applied and cured Jotacote Universal N10 is observed.
High Productivity
Fast drying at low temperatures
Year round workability with one curing agent, down to -15°C
Good application on low profile and non-ferrous substrates
Long-term Protection
Protect your asset with low life cycle cost
Ensure longevity service of water ballast tanks and cargo oil tanks
Approved for PSPC for Water Ballast Tanks according to IMO Res. MSC 215(82), Approved for PSPC for Crude Oil Tanks according to IMO Res. MSC 288(87), Approved for IMO FTPC Part 2 and 5, MSC 61(67), for paint systems with low flame spread characteristics
Pack Size
20L
Application
Brush, Roller, Spray
Touch Dry (at 20°C)
2 hours
Coverage
2.4-9.6m² per litre
Touch Dry
2 Hours
UN Number
UN1263
Base Type
Solvent-Based
Suitable For Use On
Stainless Steel
Suitable For Use On
Hulls
Suitable For Use On
Galvanised Steel
Suitable For Use On
Cargo Holds
Suitable For Use On
Coated Surfaces
Suitable For Use On
Primed Surfaces
Suitable For Use On
Immersed Environments
Suitable For Use On
Aluminium
Suitable For Use On
Decks
Suitable For Use On
Steel
Suitable For Use On
Superstructures
Suitable For Use On
Shop Primed Steel
Suitable For Use On
Tankers
Suitable For Use On
Atmospheric Environments
Suitable For Use On
Compatible Existing Coatings
Suitable For Use On
Water Ballast Tanks
Finish
Matt
Application Method
Brush
Application Method
Spray
Application Method
Roller
Usages
1 Coat
Usages
High Build
Usages
Low Temperature
Usages
Immersion
Usages
Direct to Metal
Usages
High Solids
Usages
Abrasion Resistant
Usages
Atmospheric
Product Usage Type
Primer & Topcoat
Product Range
Jotacote
Colour Family
Off-White
Colour Family
Aluminium
Colour Family
Beige
Colour Family
Red
Colour Family
Black
Colour Family
Grey
Categorised As
Metal Paints > Low Temperature Direct-to-Metal Paints
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Jotun Jotacote Universal N10 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...