Jotun Penguard Universal
  • Jotun Penguard Universal

Jotun Penguard Universal

JOT1043

Jotun Penguard Universal is a two component polyamine cured pure epoxy coating that is a fast drying, all year round, high solids, high build product. Jotun Penguard Universal provides excellent corrosion protection as part of a complete coating system and can be used as primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments.

Colour
Size
Finish
£119.69
VAT excluded

£143.63 Tax incl.
Quantity

Description

Jotun Penguard Universal is a two component polyamine cured pure epoxy coating that is a fast drying, high solids, high build product. Jotun Penguard Universal provides excellent corrosion protection as part of a complete coating system and can be used as primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, shop primed steel, stainless steel, aluminium and concrete substrates. It is also suitable as a maintenance coating on a wide range of aged coating surfaces and can be applied at sub zero surface temperatures.

Typical Uses
Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Approvals & Certificates

  • Approved for PSPC for Water Ballast Tanks according to IMO Res. MSC 215(82)
  • Approved for PSPC for Crude Oil Tanks according to IMO Res. MSC 288(87)

Additional certificates and approvals may be available on request.

Features & Benefits

  • For extended durability in severe corrosive environments
  • All-year-round, can be applied at surface temperatures down to -10°C
  • Fast dry-to-recoat and dry-to-handle
  • Certified for cargo oil tanks and water ballast tanks at newbuilding stage according to PSPC (IMO Res. MSC 82/W) 
  • Pre-qualified in systems for NORSOK system 1 and 7
  • High volume solids
  • Good spreading rate
  • Low VOC

System Structures

Low/Medium Corrosivity

  • Penguard Universal

OR

High Corrosivity

Immersed, including cargo oil tanks and water ballast tanks (IMO PSPC)

  • Penguard Universal Alu
  • Penguard Universal

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
JOT1043

Data sheet

Application
Brush, Roller, Spray
Coverage
2.4 - 10.3m² per litre
Touch Dry
2 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Carboline Carbothane 134 HP

A high-gloss and high-Solid polyurethane topcoat, which can be easily sprayed with conventional as well airless equipment. Top Features Excellent flexibility Excellent abrasion resistance Available in RAL colour shades VOC compliant

Price £310.50
In stock

Jotun Jotacote Universal N10

Jotun Jotacote Universal N10 is specially designed as a universal, all round, all year, new building coating where fast dry to handle times are required. Jotun Jotacote Universal N10 can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments and is replacing the current Jotacote Universal...

Price £146.02
In stock

International Intertuf 16

International Intertuf 16 is a one component, high build cold applied bituminous coating for use as an economical coating ideally suited for the protection of interior steel surfaces in enclosed areas such as tanks for storage of sea water, immersed piping and structural steelwork.

Price £35.39
In stock

Jotun Penguard HB

Jotun Penguard HB is a two component polyamide cured high molecular weight epoxy coating designed as a high build, all purpose coating for new construction. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments.

Price £34.49
In stock

Carboline Phenoline Tank Shield

A solvent-free, high performance epoxy coating designed as an internal tank, valve and pipe lining for chemical or other commodity storage. It is a unique blend of resins and curing agents that allow batch mixing for ease of application. Top Features High impact resistance Resistance to a broad range of fuels Passes EI 1541 jet fuel gum...

Price £340.50
In stock

Carboline Polyclad ARO

A high performance pipe coating specially designed for the protection of FBE coated pipeline from gouge and mechanical damage during directional drilling or slip bore installations. It absorbs the destructive energy and minimizes coating damage. Top Features Excellent gouge and abrasion resistance High crosslink density results in tough...

In stock

Jotun Marathon 500

A surface tolerant from Jotun that is a high build epoxy coating suitable for environments with very high corrosivity, such as areas in the splash or tidal zones. Jotun Marathon 500 is a two component polyamine cured epoxy coating. It's a surface tolerant, high solids, high build product that will continue to cure even when immersed in water.

Price £214.50
In stock

Carboline Phenoline Tank Shield Plus

A solvent free, low temperature cure, high performance epoxy lining designed to handle common cargoes in the oil and gas industry including crude oil, gasoline, jet fuels, and diesel. It is resistant to NGL condensates, produced water, brines, and industrial process water and can handle deionized water up to 82°C. Top Features Excellent...

Price £351.00
In stock

Jotun Jotamastic SF

Jotun Jotamastic SF is a two component polyamine cured epoxy mastic coating that is a surface tolerant, solvent free, high build product. Well suited for early immersion and specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity.

Price £155.70
In stock

Jotun Jotamastic 90 WG

Jotun Jotamastic 90 WG is a 'Wintergrade' version of Jotamastic 90 to aid application in lower temperatures and to provide faster drying and curing times. It is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. This product is tintable in a wide range of colours.

Price £55.50
In stock

Solignum Norusto

A ready-mixed maintenance paint for metal and other surfaces which adheres to the surface to which it is applied to form an impervious film which can withstand adverse climatic conditions.

Price £29.45
In stock

Sherwin-Williams Macropoxy C88

Sherwin-Williams Macropoxy C88 is a high performance, 2-pack multi purpose tolerant epoxy with resistance to moisture, solvents, acids, abrasion, alkalis, weather and more. 

Price £78.71
In stock

Teamac Metalastic Black Bituminous

Teamac Metalastic Black Bituminous, is a high quality bituminous solution for marine, industrial and agricultural applications.  It forms a waterproof, weatherproof, corrosion resistant coating for interior and exterior use. Advantages Multi-surface Gloss finish Indoor or outdoor Economical protection High Quality Bituminous Solution...

Price £21.83
In stock

Jotun Jotamastic 87 WG

Jotun Jotamastic 87 WG is a 'Wintergrade' version of Jotamastic 87 to aid application in lower temperatures and provide faster cure and dry times. It is a two component epoxy mastic coating for repair and maintenance. The product is surface tolerant, high solids, high build product. Specially designed for areas where optimum surface...

Price £47.47
In stock

Carboline CARBO-KIT Carbozinc 858

A high solid, organic zinc epoxy primer designed for corrosion protection of structural steel in salt and weathering environments. It is excellent for use in maintenance. Top Features Outstanding application properties Protects steel galvanically Cured film is tough and abrasion resistant Widely used within petrochemical,...

Price £71.43
In stock

Carboline Carbomastic 18 FC

This epoxy is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad and versatile list of uses in marine and other corrosive environments. It is an excellent choice for the protection of ship hull exteriors, underwater and ballast tanks. Top Features Excellent immersion performance in water Suitable as a rust...

Price £62.25
In stock