Sherwin-Williams Dura-Plate 301S
  • Sherwin-Williams Dura-Plate 301S

Sherwin-Williams Dura-Plate 301S

301S

Sherwin-Williams Dura-Plate 301S is an anticorrosive coating for long service life steel protection, normally used as an intermediate or topcoat as part of a 301 based coating system when very high edge retentive is required. It can be used for both immersion and above the waterline service in marine, offshore, construction and industrial applications.

  • Superior impact resistance
  • Good chemical resistance
  • No dew point or relative humidity restrictions
  • Excellent anticorrosive properties
  • Can be applied on vessels while on the water
Colour
  • Current colour: White
Choose a colour
Close colour picker
  • White
  • Light Grey
  • Red Oxide
  • Dark Grey
Size
Finish
£70.69
VAT excluded

£84.83 Tax incl.
Quantity

Description

Sherwin-Williams Dura-Plate 301S is an anticorrosive coating for long service life steel protection, normally used as an intermediate or topcoat as part of a 301 based coating system when very high edge retentive is required (assuring high film thickness over welds and at sharp edges). It can be used for both immersion and above the waterline service in marine, offshore, construction and industrial applications. It is suitable for new building, conversion, repair or maintenance applications. It provides superior performance protecting areas such as ballast tanks, void tanks, crude oil tanks, slop tanks, mud pits, wet spaces, bilges, decks, external hull and steel bridges. Suitable for use in USDA Inspected Facilities. 

Features & Benefits

A solvent-free, surface and humidity tolerant two-pack modifi ed epoxy. It can be applied without dew point restrictions. 301S provides chemical and abrasion resistance and very good edge-retentive properties.  It can be applied over steel prepared by hydroblasting, grit blasting or mechanical tooling.

  • Superior impact resistance
  • Non- ammable
  • Good chemical resistance
  • No dew point or relative humidity restrictions
  • Excellent anticorrosive properties
  • Can be applied on vessels while on the water

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
301S

Data sheet

Manufacturer
Sherwin-Williams
For Use On
Metal
Application Method
Brush, Roller
Sheen
Semi-Gloss
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Pack Size
4L, 20L
Application
Brush, Roller
Coverage
10m² per litre
Touch Dry
8 hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send