Jotun Jotamastic 90 GF WG
Jotun Jotamastic 90 GF WG is a 'Wintergrade' version of Jotamastic 90 GF to aid application in lower temperatures and to provide faster drying and curing times.
- Two component polyamine cured epoxy mastic coating
- Surface tolerant
- Abrasion resistance
- High solids
- High build product
- Reinforced with glass flakes for improved abrasion and scratch resistance
- Now available in 500+ colours, including RAL, NCS and BS
Product customisationDon't forget to save your customization to be able to add to cart
Jotun Jotamastic 90 GF WG is a 'Wintergrade' version of Jotamastic 90 GF to aid application in lower temperatures and to provide faster drying and curing times. It is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high solids, high build product. It is reinforced with glass flakes for improved abrasion and scratch resistance.
Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces. It can be applied at sub zero surface temperatures.
General: Primarily designed for maintenance and repair. Specially suitable for surfaces exposed to considerable wear and tear such as high traffic areas.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- For Use On
- Carbon Steel, Galvanized Steel, Stainless Steel, Aluminium, Concrete
- Application Method
- Brush, Spray
- Standard / Ready Mixed
- Single, Two or Three Pack
- Pack Size
- Brush, Spray
- 2.5 - 3.8m² per litre
- Touch Dry
- 3.5 Hours
- UN Number
Be the first to ask a question about this product!