These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Cromadex 683 Two Pack Polyurethane Eggshell Primer Finish
Cromadex 683 Two Pack Polyurethane Eggshell Primer Finish is a two pack eggshell primer finish; the high quality resin and curing agent help to produce excellent long term colour stability. The product contains zinc phosphate giving added corrosion resistance for greater durability.
- 350+ colour options from RAL and BS
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
**Available for delivery - see Delivery Options below**
Product customisationDon't forget to save your customization to be able to add to cart
Cromadex 683 Two Pack Polyurethane Eggshell Primer Finish is a two pack eggshell primer finish; the high quality resin and curing agent help to produce excellent long term colour stability.
The product contains zinc phosphate giving added corrosion resistance for greater durability. Cromadex 683 is available in full Cromadex range of colours, including BS, RAL, and special matches all in a lead free finish.
Suitable Substrates and Preparation
Degreasing with Cromadex 678 Spirit Wipe is recommended and should be carried out after any abrasion of the surface.
Steel: Degrease and abrade with P180. If necessary blast clean to remove millscale, minimum surface preparation SA2.
Aluminium & Galvanised Steel: Degrease and abrade with P240 to remove surface oxide layer. For even greater system performance apply Cromadex 903 Chromate-Free Etch Primer (then other Cromadex primer if required to increase film build).
Stainless Steel: Use of Cromadex 903, AQ58, 750 or 850 primer is required.
GRP: Remove release coat, degrease and abrade with P280. Primer with Cromadex 750 primer.
Powder Coating: Degrease and abrade with P280. Prime as necessary with Cromadex 750 or 850 primer.
4.5L unit comprises;
4L of 683 Base + 1L of 690 Curing Agent (only add half i.e. 500ml of curing agent to 4L base)
18L unit comprises;
16L of 683 Base + 2L of 690 Curing Agent
- For Use On
- Steel, Galvanized Steel, Stainless Steel, Aluminium
- Application Method
- Fully Tintable
- Single, Two or Three Pack
- Pack Size
- 4.5L, 18L
- 7.9m² per litre
- Touch Dry
- 30 mins
- UN Number
Be the first to ask a question about this product!