Bradite Fastrac is a high performance direct-to-metal silicone/polyurethane alkyd finish. Perfect for the protection and decoration of ferrous metals in many home projects such as fencing, gates and other ironmongery. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004
- Available in more than 2000 colours in RAL, BS, NCS and select ACE
- Outstanding application properties
- Excellent exterior performance on all surfaces
- Superior UV resistance
- Gold/silver only available in satin in 250ml and 1L sizes
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
**Available for delivery - see Delivery Options below**
Product customisationDon't forget to save your customization to be able to add to cart
Bradite Fastrac is a direct-to-metal paint for ferrous metals, or can be used as part of a finishing system for more demanding exposure scenarios.
Perfect for the protection and decoration of ferrous metals in many home projects such as fencing, gates and other ironmongery.
Due to the coatings high flexibility, moderate heat resistance and good resistance to mild chemicals, oils, hydrocarbons and sun light, Bradite Fastrac can be used to paint previously painted or primed timber. Ideally suited as a refinish for agricultural, construction and earth moving equipment.
Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems. 2004/42/EC EU limit value for this product (cat.A/i sb): 500g/l (2010). This product contains max.430g/l
Features & Benefits
- Available in more than 350 colours in RAL & BS
- High opacity.
- Single pack system.
- Outstanding application and flow-out properties.
- Excellent exterior performance on all surfaces.
- Superior UV and temperature resistance.
For all ferrous and suitably primed non-ferrous metals which are dry, free of contamination, dust and have been properly prepared and/or primed. Product is also suitable for previously painted or primed wood. Compatibility with existing coatings should be confirmed by preparing and painting a test area.
Remove all rust scale, loose mill scale or other corrosion products by scraping and mechanical cleaning to SIS-St 3 (ISO 8501-1:1998). Bradite TD39 industrial strength detergent, washing and rinsing should be used with scrubbing to remove grease or oil. Intact areas of existing coatings should be roughened by abrasive manual or disc sanding, feathering back to a sound coating edge. Cracks and pits should be filled using a suitable metal filler before painting. Substrate should be dust free and completely dry before coating. For unpainted softwood timber, knots should be sealed with a proprietary knotting compound and then primed with a proprietary quality wood primer. Unpainted hardwood & resinous timber substrates should be primed with a proprietary aluminium wood primer.
For industrial maintenance applications, high pressure steam cleaning to remove all loose, flaking paint and contamination back to a sound surface, is highly recommended. Light surface rusting may be effectively treated using one coat of Bradite Rust Converter RC46 prior to application of Fastrac finish. New galvanised steel should be thoroughly degreased and then pre-treated with Bradite Mordent Solution TM38 prior to application of Fastrac finish. Alternatively, or for other non-ferrous metals, prime with Bradite Barrier Primer EU96 or SORTED WP45, before application of Fastrac finish. For the protection of metal structures in more demanding exposure scenarios, application of Fastrac Antico Primer AP71 or Bradite General Purpose Primer AP70 is highly recommended.
Application and use should always conform to the codes of practice described in BS 6150 and BS 5493.
Brush and Roller: Supplied ready for use. Use natural bristle brush, tapered and flagged, for best appearance. Thin, if required, with 0 - 5% Bradite Thinner TW35.
Conventional Air Spraying: Thin with 10 - 20% Bradite Thinner TW35 as required, tip size – 1.5 mm, tip pressure 60psi (0.4MPa) approximately.
Airless Spraying: Thin with 0 - 15% Bradite Thinner TW35 as required, tip size - 18 thou (0.46mm) approximately, tip pressure - 2100 psi (15MPa) approximately.
Clean all equipment immediately after use with Bradite Thinner TW35 for best results.
- For Use On
- Ferrous Metals, Non-Ferrous Metals
- Application Method
- Brush, Roller, Spray
- Satin, Gloss
- Fully Tintable
- Single, Two or Three Pack
- Pack Size
- 250ml, 1L, 2.5L
- Brush, Roller, Spray
- 13m2 per Litre
- Touch Dry
- 2 Hours
- UN Number