We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
Carboline Carbocoat 1342 Primer is a rust preventing primer. Typically used as a primer above water line on areas like superstructure, topside, deck, stores room, cargo hold etc.
Carboline Carbocoat 1342 Primer is a rust preventing primer. Typically used as a primer above water line on areas like superstructure, topside, deck, stores room, cargo hold etc.
1.5 - 2 mils (38 - 51 microns) per coat - Do not exceed 3.0 mils in a single coat.
Topcoats:
May be topcoated with alkyd paints as recommended.
Storage
Store dry and above freezing
Drying Times
Curing Schedule
Surface Temperature
Dry To Touch
Dry To Handle
Dry To Topcoat
5°C (41°F)
3 Hours
12 Hours
24 Hours
10°C (50°F)
1.5 Hours
8 Hours
24 Hours
20°C (68°F)
1.5 Hours
8 Hours
24 Hours
30°C (86°F)
1 Hour
8 Hours
24 Hours
These times are based on 60 microns DFT. Higher film thickness, insufficient ventilation or cooler temperatures will require longer drying times and could result in solvent entrapment and premature failure
Recommended overcoating is Carbocoat 1343 Finish. Can be recoated with Carbocoat 1343 Finish within 1 hour and/or after 24 hours.
Surface Preparation
General
Surface must be clean and dry upon paint application. Corroded areas should be pretreated to min. St 2 (ISO 8501-1). Blast cleaning will improve quality and extend service life in more heavy exposures.
Apply directly on pretreated steel/old paint, pretreated galvanized/aluminium or other substrate as recommended.
Application Methods
Product Information
Airless Spray:
Tip Size: 0,015-0,021”
GPM Output: 3.0 (minimum)
Brush & Roller (General):
Medium bristle brush or medium nap roller is recommended
Application Conditions
Product Application Conditions
Condition
Material
Surface
Ambient
Humidity
Minimum
5°C (41°F)
0°C (32°F)
0°C (32°F)
0%
Maximum
40°C (104°F)
50°C (122°F)
50°C (122°F)
85%
These times are based on 60 microns DFT. Higher film thickness, insufficient ventilation or cooler temperatures will require longer drying times and could result in solvent entrapment and premature failure.
Recommended overcoating is Carbocoat 1343 Finish. Can be recoated with Carbocoat 1343 Finish within 1 hour and/or after 24 hours.
Health & Safety
Refer to the safety data sheet in the attachments section above and tin label prior to use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Carboline Carbocoat 1342 Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...