Carboline Carbocoat 1343 Finish is a quick drying, White Spirit based alkyd topcoat with good light and weather resistance that is suitable for interior and exterior use.
May be diluted up to 20%
High gloss finish
This product is only available as PRICE ON APPLICATION - For more information and to place an order please contact us on 0113 2455450or email [email protected].
Carboline Carbocoat 1343 Finish is a quick drying, White Spirit based alkyd topcoat with good light and weather resistance that is suitable for interior and exterior use.
Not recommended for immersion, direct exposure to acids, alkalies or solvents
Shelf Life:
24 months
Storage:
Store indoors
Drying Times
Curing Schedule
Surface Temperature
Dry To Touch
Dry To Handle
Dry To Topcoat
5°C (41°F)
3 Hours
16 Hours
24 Hours
10°C (50°F)
2 Hours
12 Hours
16 Hours
20°C (68°F)
2 Hours
12 Hours
16 Hours
30°C (86°F)
1.5 Hours
8 Hours
12 Hours
These times are based on 50 microns DFT. Higher film thickness, insufficient ventilation or cooler temperatures will require longer drying times and could result in solvent entrapment and premature failure
Surface Preparation
General
Surface must be clean and dry upon paint application
Oil and fat contaminants must be removed with a suitable solvent like Carboline Thinner No. 10 or an alkaline cleaner like Carboline Surface Cleaner No. 3
Steel
Apply over clean and dry recommended primer
Application Methods
Product Information
Mixing:
Stir well before use. Power stirring is recommended
Thinning:
May be diluted up to 20% with Thinner no. 45 (White Spirit)
Density:
0,95 – 1,20 kg/ltr. depending on color
Conventional Spray:
Dilute the paint up to 20% to achieve desired spray viscosity
Airless Spray:
Tip Size: 0,011-0,017”
Output PSI: 120-140 kg/cm² (2000 – 2100 PSI)
Brush & Roller (General):
Medium bristle brush or medium nap roller is recommended
Application Conditions
Product Application Conditions
Condition
Material
Surface
Ambient
Humidity
Minimum
5°C (41°F)
5°C (41°F)
2°C (36°F)
0%
Maximum
45°C (113°F)
70°C (158°F)
50°C (122°F)
90%
Do not apply if surface temperature is less than 3°C above the dew point
Health & Safety
Refer to the safety data sheet in the attachments section above and tin label prior to use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
