Carboline Carboguard 890 MIO is a highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all steel and concrete industrial markets.
Excellent chemical resistance
Surface tolerant characteristics
Self-priming
Available in 350+ colours, including RAL and BS
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cart
Carboline Carboguard 890 MIO is a highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all steel and concrete industrial markets. Self-priming and suitable for application over most existing coatings and St2. St3 prepared substrates
This coating is self-priming. May be applied over inorganic zinc primers and other tightly adhering coatings. A mist coat may be required to minimize bubbling over inorganic zinc primers. Do not apply over latex coatings.
Top Features & Benefits
Excellent chemical resistance
Surface tolerant characteristics
Self-priming and primer/finish capabilities
Very good abrasion resistance
Also available in a low temperature (LT) cure version (2°C)
VOC compliant to current AIM regulations
Preparation & Application
Surfaces must be clean and dry. Employ adequate methods to remove dirt, dust, oil and all other contaminants that could interfere with adhesion of the coating.
Steel Sa2½ with a 38-75 surface profile. St2, St3 and Sa1 are suitable preparation methods for mild environments.
Galvanized Steel SSPC-SP1 and prime with specific Carboline primers as recommend by Carboline
Concrete Concrete must be cured 28 days at 24C and 50% relative humidity or equivalent. Prepare surfaces in accordance with ASTM D4258 Surface Cleaning of Concrete and ASTM D4259 Abrading Concrete. Voids in concrete may require surfacing. Prime with Carboguard 1340.
Previously Painted Surfaces Lightly sand or abrade to roughen surface and de-gloss the surface. Existing paint must attain a minimum 3B rating in accordance with ASTM D3359 “X-Scribe” adhesion test.
Mixing Power mix separately, then combine and power mix, at 1:1 Ratio (A to B). DO NOT MIX PARTIAL KITS.
Use of thinners other than those supplied or recommended by Carboline may adversely affect product performance and void product warranty, whether expressed or implied.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Carboline Carboguard 890 MIO is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...