Carboline Carbothane 133 HG

CARB3693

Carboline Carbothane 133 HG is a two-component high build, glossy finish that has outstanding weathering resistance and colour retention. Suitable for application over a number of Carboline primers and intermediates, this material provides excellent corrosion resistance.

  • Outstanding performance properties in both mild and aggressive environments
  • High build; suitable for many two-coat systems
  • Suitable for application direct to inorganic zincs
  • Application by spray, brush or roller
  • Indefinite re-coatability
  • Available in 350+ RAL and BS colours

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

**Available for delivery - see Delivery Options below**

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
£76.88
VAT excluded

£92.26 Tax incl.
Quantity

Description

Carboline Carbothane 133 HG is a two-component, high build, glossy finish that has outstanding weathering resistance and colour retention. Suitable for application over a number of Carboline primers and intermediates, this material provides excellent corrosion resistance.



Click To Jump To Section:




Features and Benefits


  • Outstanding performance properties in both mild and aggressive environments
  • High build; suitable for many two-coat systems
  • Suitable for application direct to inorganic zincs
  • Application by spray, brush, or roller
  • Indefinite re-coatability
  • Available in 350+ RAL and BS colours



Product Specification


Technical Data
Carboline Carbothane 133 HG
Volume Solids: 67 ± 2%
Theoretical Coverage Rate: 8,9 m²/l at 75 microns
Allow for loss in mixing and application
Dry Film Thickness: 50 - 100 microns (1.97 - 3.94 mils) per coat
Normally 75 µm
Dry Temperature Resistance: Continuous: 110°C (230°F)
Non-Continuous: 130°C (266°F)
Discolouration and loss of gloss may occur above 110ºC
Topcoats: Normally none. May be topcoated with most generic types of paints like vinyls, acrylics, epoxies and polyurethanes
Density: 1.22 g/cm³ depending on colour
Limitations: Not recommended for immersion service
Shelf Life: Part A: Min. 36 months at 24°C
Part B: Min. 24 months at 24°C
Storage Temperature and Humidity: 4°C - 45°C
0-95% Relative Humidity



Drying Times


Curing Schedule
Surface Temp. Final Cure Minimum Recoat Time Tack Free
5°C (41°F) 28 Days 36 Hours 12 Hours
10°C (50°F) 14 Days 18 Hours 6 Hours
20°C (68°F) 7 Days 12 Hours 4 Hours
30°C (86°F) 4 Days 8 Hours 2 Hours



  • These times are based on 50 - 100 microns dry film thickness. Higher film thickness, insufficient ventilation or cooler temperatures will require longer cure times and could result in solvent entrapment and premature failure
  • Maximum recoat times are indefinite
  • Surface must be clean and dry
  • As part of good painting practice it is recommended to test for adhesion by wiping the surface with Thinner 25
  • If the film shows a slight "tack" the surface is suitable for recoating without extensive surface preparation such as abrading



Surface Preparation


General

  • Surfaces must be clean and dry
  • Employ adequate methods to remove dirt, dust, oil and all other contaminants that could interfere with adhesion of the coating

Steel

Galvanised Steel

  • Prime with specific Carboline primers as recommended by Rawlins
  • Refer to the specific primer’s Product Data Sheet for substrate preparation requirements

Aluminium

  • SSPC-SP1 and prime with appropriate Carboline primer as recommended by Rawlins

Previously Painted Surfaces

  • Lightly sand or abrade to roughen and de-gloss the surface. Existing paint must attain a minimum 3B rating in accordance with ASTM D3359 “X-Scribe” adhesion test
  • Prime with specific Carboline primers as recommended by Rawlins



Application Methods


Product Information
Mixing: Power mix Part A separately, then combine with Part B and power mix
Do not mix partial kits
Thinning: Thin up to 12% with Carboline Thinner 31
Use of thinners other than those supplied or recommended by Carboline may adversely affect product performance and void product warranty, whether expressed or implied
Ratio: 4:1 (A to B)
Pot Life: 6 Hours at 20ºC and less at higher temperatures
Spray Application (General) This is a high solids coating and may require adjustments in spray techniques. Wet film thickness is easily and quickly achieved
Airless Spray: Pump Ratio: 30:1 min
Volume Output: 3.0 gpm min
Material Hose: 3/8” I.D. min
Tip Size: 015-.019”
Output PSI: 2000-2300 psi
Filter Size: 60 mesh
Brush and Roller: Multiple coats may be required to obtain desired appearance, recommended dry film thickness and adequate hiding. Avoid excessive re-brushing or re-rolling. For best results, tie-in within 10 minutes at 24ºC
Brush:

Recommended for touch-up only. Use a medium, natural bristle brush

Roller: Use a medium-nap synthetic roller cover with phenolic core



Application Conditions


Product Conditions
Condition Material Surface Ambient Humidity
Minimum 5°C 0°C 0°C 0%
Maximum 40°C 45°C 45°C 85%



  • Industry standards are for substrate temperatures to be 3ºC above the dew point
  • Special application techniques may be required above or below normal application conditions



Health and Safety


Clean Up

  • Use Thinner 2 or Acetone
  • In case of spillage, absorb and dispose of in accordance with local applicable regulations

Safety

  • Read and follow all caution statements on this product data sheet and on the safety data sheets for this product and use personal protective equipment as directed
  • Hypersensitive persons should wear protective clothing, gloves, and use protective cream on face, hands and all exposed areas

Ventilation

  • When used as a tank lining or in enclosed areas, thorough air circulation must be used during and after application until the coating is cured
  • The ventilation system should be capable of preventing the solvent vapor concentration from reaching the lower explosion limit for the solvents used

Caution

  • This product contains flammable solvents
  • Keep away from sparks and open flames
  • Refer to the product and safety data sheet in the attachments section above for further details
Product Details
CARB3693

Data sheet

Manufacturer
Carboline
For Use On
Steel, Aluminium
Application Method
Brush, Roller, Spray
Sheen
Gloss
Colour
Fully Tintable
Single, Two or Three Pack
Two-Pack
Pack Size
5L, 20L
Mixing Ratio
4:1 (A to B)
Dry to Recoat (at 20°C)
12 Hours
Fully Cured (at 20°C)
7 Days
Pot Life (at 20°C)
6 Hours
Coverage
8,9 m²/l at 75 microns
Recommended Thinner/Cleaner
Carboline Thinner 2
Compatible Topcoats
Normally none. May be topcoated with most generic types of paints like vinyls, acrylics, epoxies and polyurethanes
Max. Application Temperature
Material: 40°C - Surface: 45°C - Ambient: 45°C - Humidity: 85%
Min. Application Temperature
Material: 5°C - Surface: 0°C - Ambient: 0°C - Humidity: 0%
Density
1.22 g/cm³ depending on colour
Solids by Volume
67 ± 2%
Shelf Life (from date of manufacture)
Part A: Min. 36 months at 24°C - Part B: Min. 24 months at 24°C
Recommended Dry Film Thickness
50 - 100 microns (1.97 - 3.94 mils) per coat - Normally 75 µm
UN Number (Activator)
UN1866
UN Number (Base)
UN1263
Dry to Recoat (at 10°C)
18 Hours
Fully Cured (at 10°C)
14 Days
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Carboline Thinner 2

Carboline Thinner 2 is a thinner for use in industrial coatings. More Information **Available for delivery - see Delivery Options below**

Price £27.38
In stock

Carboline Thinner 25

Carboline Thinner 25 is a thinner for use in industrial coatings. More Information **Available for delivery - see Delivery Options below**

Price £28.88
In stock

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

Price £25.53
In stock