Carboline Plasite 7122

130PA1NL

This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures.

This product is available as POA. Click here to email us for more information

Top Features

  • Versatile coating with wide chemical resistance
  • Excellent abrasion resistance
  • Excellent resistance to fuels
  • Long history of performance
Colour
  • Current colour: White
Choose a colour
Close colour picker
  • White
  • Black
  • RAL5012 - Light Blue
  • Green
  • Light Grey
  • Tile Red
  • Medium Grey - RAL 7005
Finish
Quantity

Description

Carboline Plasite 7122 is a lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. It is suitable for use in food-grade service where product purity (taste and odour) are critical. It has excellent abrasion and thermal shock resistance.



Top Features & Benefits


  • Versatile coating with wide chemical resistance
  • Excellent abrasion resistance
  • Excellent thermal shock resistance
  • Excellent resistance to fuels
  • Long history of performance
  • Self-priming

Preparation & Application


Steel
Immersion Service or Aggressive Chemical Exposures (Spill/Fume) Abrasive clean to an SSPC-SP10 or NACE No. 2 (Near-White metal surface) Profile: 1-3 mils (25-75 microns)

Non-Immersion (Atmospheric) Preferred: SSPC-SP6; Where abrasive blasting is not permitted or practical, clean per SSPC-SP3 to yield a rough (non-polished) surface.

Aluminium
Surface shall be clean and grease free with a blast produced anchor pattern or “tooth” as described earlier under STEEL. In addition, the blasted surface shall be given a chemical treatment such as: ALODINE 1200S available from Henkel Surface Tech; IRIDITE 14-2 produced by MacDermid Incorporated; OAKITE CRYSCOAT 747LTS and OAKITE CRYSCOAT ULTRASEAL produced by Oakite Products. For immersion, blasting with sharp grit followed by the chemical surface treatment is required.

Galvanized Steel, Concrete and CMU
Contact Rawlins Technical Services

Mixing
Mix the Part A and part B separately, then add the Part B to the Part A slowly and mix thoroughly. The coating should stand approximately 30 minutes after the two components are combined.

Thinning
Thinning will be necessary to spray this coating. Thin up to 10% for normal temperatures and add up to 20% thinner for higher temperatures if necessary. Use Plasite Thinner 71 (a medium-fast thinner) for internal tank lining; and Plasite Thinner #19 (a slower thinner) for exterior (hot or windy) conditions.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
130PA1NL
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Jotun Penguard HB

Jotun Penguard HB is a two component polyamide cured high molecular weight epoxy coating designed as a high build, all purpose coating for new construction. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments.

Price £34.49
In stock

Carboline CARBO-KIT Carbomastic 18 FC

A heavy duty, high build coating for protection of steel in corrosive environments. It is specially designed for application with brush and roller. Top Features Excellent immersion performance in both fresh and sea water Suitable as a rust preventing coating in ballast tanks Very good abrasion resistance

Price £57.83
In stock

Bradite Bitumen Coat/Finish

Provides a tough hard-wearing film over steel, non-ferrous metals, concrete, asphalt and more. Supplied in black, Bradite Bitumen Coat/Finish will bring superb water-repellent properties to the substrate. Advantages Only one coat required High build coating Confirms to BS 3416 and BS 6949, Type 1 Class A

Price £29.10
In stock

Jotun Conseal Touch-Up

Jotun Conseal Touch-Up is a one component physically drying acrylic coating with a matt finish. Manufactured by Jotun, this is a high build product that is fast drying and can be used direct to metal. Ideal as a primer/topcoat in atmospheric environments, it can be applied at sub zero surface temperatures.

Price £35.10
In stock

Jotun Jotamastic 87

Jotun Jotamastic 87 is a two component epoxy mastic coating for repair and maintenance. The product is surface tolerant, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity.

Price £46.85
In stock

Carboline Polyclad 767

A high performance pipe coating specially designed for the protection of pipeline interiors. Typical application could be pipeline interiors for water transmission. Top Features Fast curing rate increases throughput Superior wetting properties Meets AWWA C222 UL approved for ANSI/NSF Std. 61 potable water This product is available as...

In stock

Carboline Phenoline 385

A high performance, high solids, epoxy lining that is recommended for a variety of petroleum storage products including 180°F (82°C) crude oil, demineralized water 150°F (65°C), crude/water mixtures, fuel oil, jet fuel, biodiesel, and gasoline. Top Features High solids; Low VOC formula VOC compliant Excellent resistance to petroleum...

Price £132.75
In stock

Carboline Plasite 7122 VTF

A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Top Features Excellent overall chemical resistance to a wide range of solvents Very good abrasion resistance and flexibility Complies with FDA 21CFR 175.300 criteria for food contact

In stock

Bradite Solar Reflective Bitumen

Confirming to BS 3416 and BS 6949, Type 1 Class A, this solar reflective bitumen coating is perfect for steel, non-ferrous metals, concrete, brick and asphalt, where a tough waterproof coating is required on surfaces. Advantages Hard-wearing gloss finish Repels water fast-drying High build coating

Price £58.19
In stock

Jotun Jotamastic 87 Alu WG

Jotun Jotamastic 87 Alu WG is a 'Wintergrade' version of Jotamastic 87 Alu to aid application in lower temperatures and to provide faster drying and curing times. Jotun Jotamastic 87 Alu WG is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product that is aluminium pigmented for improved barrier...

Price £44.21
In stock

1805 High Build Vinyl Finish

A quick drying, vinyl acrylic, anti-corrosive, primer-finish formulated for direct application to degreased galvanised steelwork without the need for a primer. 

Price £58.22
In stock

Jotun Marathon

This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend Jotun Marathon 500 as a great alternative. Jotun Marathon is a two component polyamine cured epoxy coating that is a high solids, high build, glass flake reinforced product. It is scratch and abrasion resistant and is suitable for...

Price £233.06
In stock

International Interseal 670HS

International Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings.

Price £106.59
In stock

International Intercryl 525

International Intercryl 525 is designed for use as a primer/finish for structural steel, in a wide variety of general industrial environments of light to moderate corrosivity, including on bridges, commercial buildings, infrastructure and manufacturing plants. It exhibits excellent colour and gloss retention.

Price £337.45
In stock

Carboline Polyclad 956

A solvent-less, high gloss, smooth epoxy coating for the lining of gas transmission pipelines. It’s hard, smooth surface aids in the flow of gas by reducing turbulence while protecting the interior surfaces from corrosion. Tested in accordance with API RP 5L2 for gas transmission pipelines. Top Features Improves flow efficiency in gas...

In stock