Zinga Alu ZM
  • Zinga Alu ZM

Zinga Alu ZM

Alu ZM, a quick-drying one-pack coating for use as an aluminium topcoat on Zinga or applied directly onto old, uncorroded hot-dip galvanised or thermal sprayed zinc substrates.

  • One pack system
  • Topcoat for Zinga
  • Apply by brush or sprayer
    • Not to be applied by a roller
  • Touch dry in 25 minutes, full cured in 24 hours
Colour
Size
£15.22
VAT excluded

£18.26 Tax incl.
Quantity

Description

Alu ZM, a quick-drying one-pack coating for use as an aluminium topcoat on Zinga or applied directly onto old, uncorroded hot-dip galvanised or thermal sprayed zinc substrates by brush or spray.

Based on aluminium flakes, Alu ZM is mainly applied for aesthetical reasons with its shiny aluminium aspect, but good chemical and abrasion resistance allows it to be used in industrial environments.



Features


  • One pack system
  • Topcoat for Zinga
  • Apply by brush or sprayer
    • Not to be applied by a roller
  • Touch dry in 25 minutes, full cured in 24 hours



Application


For more specific and detailed recommendations concerning application, please contact our technical team on 0113 2455450. For detailed information about the health and safety hazards and precautions for use, refer to the safety data sheet in the attachments tab above.

By Brush - Alu ZM should not be applied by roller.

Dilution: Alu ZM is ready for use when applied by brush. For best results, dilute 3 to 5%.

First layer: Wait until Zinga is sufficiently dry before application of first layer by brush (4 hours after touch dry).

By Conventional Spray-Gun

Dilution: 10-20% (mass on mass) with Zingasolv depending on nozzle size. More dilution for same nozzle size will give a smoother surface finish.

Pressure at the nozzle: 2 to 4 bar

Nozzle opening: 1.4 to 1.8 mm

By Airless Spraying

Dilution: 5-10% (mass on mass) with Zingasolv depending on nozzle size. More dilution for same nozzle size will give a smoother surface finish.

Pressure at the nozzle: ± 150 bar

Nozzle opening: 0.017 - 0.031 inch; 0.015-0.025 inch for a smoother finish.



Coverage


Theoretical Consumption

  • For 40 μm DFT: 8,50 m²/L
  • For 60 μm DFT: 5,67 m²/L

Theoretical Coverage

  • For 40 μm DFT: 0,12 L/m²
  • For 60 μm DFT: 0,18 L/m²



Drying


Alu ZM dries by evaporation of the solvent. The drying process is influenced by the total WFT, the number of coats applied, the ambient air (humidity and temperature) and the steel surface temperatures.

Drying time For 40 μm DFT at 20°C in a well-ventilated environment:

  • Touch dry: 25 minutes
  • Dry to handle: 1.5 hours
  • Fully cured: 24 hours

Overcoating

With a new layer of Alu ZM:

  • 1 hour after touch dry with spray. 4 hours after touch dry by brush.
  • Any intermediate coat contamination that could disturb the adherence of the next coat should be removed by appropriate cleaning.

Reliquidisation

Each new layer of Alu ZM reliquidises the former Alu ZM layer so that both layers form one homogeneous layer.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Carboline Polyclad 777 PL

A high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. Top Features Fast curing increases throughput Excellent abrasion resistance Superior wetting...

In stock

Rust-Oleum 9100 High Performance Epoxy

A two-pack, glossy epoxy for metal, walls and floors. It is the most efficient epoxy system providing a very hard coating with high layer thickness giving lasting results with even a single coat application. 

Price £98.77
In stock

Carboline Carbocoat 150 Universal Primer

A heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds. Top Features Good for extended exposure demands Ability to be welded through Heavy-metal free

Price £226.50
In stock

Sikalastic 844 XT

Sikalastic 844 XT is a two part, elastic, very fast curing modified polyurea spray applied membrane where exposure to high acidic and alkaline chemical concentrations are present, therefore also suitable for the use in closed structures containing biogenic sulphuric acid. Sikalastic 844 XT can only be spray applied with special two part hot spray equipment.

Price £12,283.37
In stock

Jotun Peroxide 11

Jotun Peroxide 11 is a specially developed additive for  Jotun Chemflake Special and Jotun Chemflake CV products - refer to each product data sheet for further information. Alternatively speak to our Technical Department at Rawlins Paints for help and advice prior to purchase.

Price £30.31
In stock

Rust-Oleum Mathys Noxyde Pegarust

A rust preventing coating that is the solvent-based version of Rust-Oleum Mathys Noxyde that can be applied by brush, roller or spray in cold temperatures down to 0°C or on damp surfaces by brush, roller or spray.

Price £61.05
In stock

Jotun Conseal Touch-Up Alu

Jotun Conseal Touch-Up Alu is a one component physically drying acrylic coating with a matt finish. It is an aluminium finish version of Jotun Conseal Touch-Up and is also a high build product that is fast drying and can be used direct to metal. To be used as primer/topcoat in atmospheric environments, it can be applied at sub zero surface...

Price £32.29
In stock

Carboline CARBO-KIT Carbozinc 858

A high solid, organic zinc epoxy primer designed for corrosion protection of structural steel in salt and weathering environments. It is excellent for use in maintenance. Top Features Outstanding application properties Protects steel galvanically Cured film is tough and abrasion resistant Widely used within petrochemical,...

Price £71.43
In stock

Jotun Jotamastic Smart Pack HB

Jotun Jotamastic Smart Pack HB is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product designed for application with brush and roller. 1:1 mixing ratio for easy use and reduced wastage. Specially designed for areas where optimum surface preparation is not possible, provides long lasting protection in...

Price £138.47
In stock

Jotun Hardtop Flexi Alu

Jotun Hardtop Flexi Alu has a remarkable ability to resist impact and will maintain initial gloss level over extended periods. Low VOCs, application of single coats up to 110 microns and fast drying add to the features of Hardtop Flexi Alu. This is one of the few products that contain anti-corrosive pigments for the best direct to metal performance.

Price £237.98
In stock

Carboline Plasite 9060 LT

A high performance tank lining with curing characteristics allowing the coating to be applied and cure at temperatures as low as 35°F (2°C) while achieving unmatched chemical resistance in caustic, acid, solvent and ethanol service. Formulated for use in a large variety of facilities including waste water, chemical and fuel storage, wet-gas...

In stock

Carboline Plasite 7122

This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. This product is available as POA. Click here to email us for more information.  Top Features Versatile coating with wide chemical resistance...

In stock

Carboline Carboguard 888 MIO

A low temperature and rapid curing primer/finish with an extended recoat window that provides excellent corrosion resistance as a primer, intermediate or finish coat on to steel. Top Features Low-temperature characteristics Rapid handling Low yellowing VOC compliant

Price £249.00
In stock

Jotun Jotamastic 80

Jotun Jotamastic 80 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids product. Specially designed for areas where optimum surface preparation is not possible or desired. Can be used as a primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments.

Price £34.79
In stock

Rust-Oleum CombiColor Wrought Iron

A Wrought Iron effect maintenance paint by Rust-Oleum for metal with superior metal protection from their CombiColor product range. This CombiColor paint topcoat and primer in one, and can be applied direct to rust. It will provide excellent rust protection to metal, wood and steel surfaces.

Price £7.19
In stock

Carboline Thermaline 450 EP

A high performance immersion-grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. It is typically used on hot steel substrates under insulation operating continuously up to 400°F/204°C. Top Features Continuous temperature resistance to 204°C Very good flexibility Acceptable for use...

Price £130.80
In stock