HMG Thinner 2621
HMG Thinner 2621 is a thinner for use in various applications.For use with compatible HMG systems.More Information Delivery Info
£13.37 (incl. VAT)
£11.14 (ex. VAT)
HMG SPS30 Primer Finish is a quick drying SPS (Single Protection System) single coat finish offering excellent performance.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Airless/Air-Assisted: | 70 μm | 160 μm | |
Pressure Pot: | 55 μm | 120 μm | |
Compliant Spray Gun: | 45 μm | 100 μm |
Coverage: 8-10m2 per litre at 100 microns wft (Theoretical)
Drying Times At 20°C | |
---|---|
Touch Dry: | 30 minutes |
Dry To Recoat: | Approximately 48 hours at 20°C dependant on film thickness. |
Fully Cured: | 60 minutes |
Technical Data | |||||
---|---|---|---|---|---|
Airless/Air-Assisted | Pressure Pot | Compliant Spray Gun | |||
Mixing Ratio: | Ready for use | Ready for use | - | ||
- | - | Thinner: 10 - 20% | |||
Thinner Options: | - | - | Thinner 2621 | ||
Viscosity: | Ready for use | Ready for use | 50 - 65 seconds B4 cup | ||
Spray Gun Setup: | 13 - 15 thou 40/50° | 2.0 | 1.6 - 2.0 | ||
Number Of Coats (Guide Only): | 1 full coat | 1 full coat | 2 full coats | ||
Flash Off: | 15 minutes between coats |
For further information on mixing ratios please contact Rawlins Paints Technical on - 0113 2455450 (option 2) or [email protected].
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
HMG SPS30 Primer Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2621 is a thinner for use in various applications.For use with compatible HMG systems.More Information Delivery Info
£13.37 (incl. VAT)
£11.14 (ex. VAT)
HMG SPS30 Primer Finish Aerosol is a quick drying SPS (Single Protection System) single coat finish offering excellent performance. For the non-aerosol version of this product please see HMG SPS30 Primer Finish.Provided with a sheen level of 30% finish Hard dry in as little as 60 minutes at 20℃ Coverage up to 8-10m2/L 400ml/16oz Aerosol...
£43.55 (incl. VAT)
£36.29 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)