HMG SPS Primer Finish Gloss is a quick drying SPS, durable, anti-corrosive, single protection system providing hard wearing, tough gloss finish. Application direct to metal with wet-on-wet application. Keeps equipment looking new for longer.
For professional use
Quick drying - touch dry in 30 mins at 20°C, hard dry in 6 hours at 20°C
Coverage: 4 – 5m² per litre at 100 microns WFT
Primer and finish in one coat
Ideal for brand new or refurbished skips, containers or other steel equipment requiring fast turnaround
Can be applied to suitably prepared bare substrates and previously painted metal
Also for use on aluminium plus mild, galvanised and shot blasted steel
Resistant to oil, grease and some chemicals
Available in 5,000+ colours from RAL, NCS, and British Standard
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Rust/corrosion to be removed to Sa or St standards, remove to clean metallic appearance with little or no rust/corrosion present
Areas where blast cleaning is not cost effective or practical, then the use of HMG Ferrozinc is an alternative
Though Ferrozinc is not an equivalent alternative to shot blasting, it does offer a far superior performance than conventional coatings applied to slightly rusted surfaces
HMG FERROZINC is used after simple wire brushing to remove surface rust, prior to application of primer
Bare substrates
Aluminium: Abrade with P180 – P320, degrease with suitable HMG Prep Clean prior to application of primer
Mild steel: Remove millscale and thoroughly degrease using suitable HMG Prep Clean
Abrade with P80 – P180 if necessary, prior to application of primer
Shot blasted steel: Remove all traces of blast grit/sand prior to application of primer
Galvanised steel: Degrease with suitable HMG Prep Clean, apply HMG Mordant Wash, apply HMG Etch Primer and if required HMG Primer
Previously Painted Surfaces
High pressure wash to remove all loose debris and poorly adhered previous coatings to remove all salts and other contaminants
Degrease using suitable HMG Degreaser 2800 to remove grease and oils not removed with pressure washing alone
Existing coatings to be well adhered with all edges tight and well feathered
Rust/corrosion to be removed back to clean metallic appearance
Abrade to provide good adhesion
Wipe over with degreaser to remove loose debris from abrasion
Substrate to be clean, free of grease, oils, dust and completely dry prior to application
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Health & Safety
Refer to the safety data sheet in the attachments section above and tin label prior to use
Suitable respiratory equipment should be worn when spraying
Contaminated rags, spray booth filters or other substrates should be segregated from other chemical waste, soaked with water and disposed of in a non-combustible container with a tight fitting lid
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
HMG SPS Primer Finish Gloss is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
HMG Ferrozinc Rust Converter is a high performance water-based rust converter, ideal for application to areas difficult to shot-blast or where total removal of rust is not possible. Also suitable for surfaces difficult to dry due to existing moisture.Easily applied single pack material Changes colour to show rust has been neutralised...
HMG Mordant T Wash is designed for use as an etching solution for galvanised steel & zintec.Manufactured to a formulation originally developed by the British Rail Board Click to jump down to Technical DataCoverage Calculator More Information Delivery Info
HMG Chromate Free Etch Primer is a quick drying chromate free etch primer providing good anti corrosive properties and excellent adhesion to ferrous and non-ferrous metals. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator when used as a wash primer:2-Pack System DetailsBase...
HMG SPS70 Primer Finish is a quick drying, durable, anti-corrosive, single protection system providing hard wearing, tough matt, semi-gloss or full gloss finish - Keeps equipment looking new for longer. Application direct to metal with wet-on-wet application. For professional use Quick-drying - touch dry in 30 mins, hard dry after 6...
HMG SPS30 Primer Finish is a quick drying SPS (Single Protection System) single coat finish offering excellent performance.Provided with a sheen level of 30% finish Hard dry in as little as 60 minutes at 20℃Touch dry in 30 mins at 20℃Coverage up to 8-10m2 per litre Flashpoint: 24℃ Available in 5,000+ colours from RAL, NCS, and...
HMG Prep Clean 2802 is a fast evaporating, strong Preparatory Cleaning solvent for the heavy duty degreasing of substrates.Used in many applications For use on bare surfaces onlyMore Information Delivery Info
HMG Prep Clean 2804 is a water based preparatory Cleaner for the degreasing of substrates.Used in many applications For use on bare surfaces onlyMore Information Delivery Info
HMG Prep Clean 2803 is a slow evaporating, low odour and mild preparatory cleaning solvent for the degreasing of substrates.Used in many applications For use on bare surfaces onlyMore Information Delivery Info
HMG Prep Clean 2800 is a fast evaporating, mild preparatory cleaning solvent for the degreasing of substrates.Used in many applications Mildly anti-static For use previously painted surfacesMore Information Delivery Info
HMG SPS30 Primer Finish Aerosol is a quick drying SPS (Single Protection System) single coat finish offering excellent performance. For the non-aerosol version of this product please see HMG SPS30 Primer Finish.Provided with a sheen level of 30% finish Hard dry in as little as 60 minutes at 20℃ Coverage up to 8-10m2/L 400ml/16oz Aerosol...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...