HMG Thinner 2621
HMG Thinner 2621 is a thinner for use in various applications.For use with compatible HMG systems.More Information Delivery Info
£13.37 (incl. VAT)
£11.14 (ex. VAT)
In Stock and Available for Delivery
- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
We no longer stock this product, but can recommend HMG 1K DTM 70 Colour as a great alternative.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
HMG Raincoat 2 70 Percent Gloss is a high quality, single coat finish achieving a 70% gloss level.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Good corrosion resistance
- Early moisture resistant
- Fast drying properties even in poor application conditions
- Available in a range of colours including RAL and BS
Product Specification
| Technical Data | ||||||
|---|---|---|---|---|---|---|
| Raincoat 2 70% Gloss Colours | Raincoat 2 70% Gloss Colours (contains lead) | |||||
| Volume Solids: | 68.8% | 71.2% | ||||
| VOC Content: | 0.380kgs/ltr | 0.380kgs/ltr | ||||
| SG: | - | - | ||||
| Viscosity: | 300 mPas | 300 mPas | ||||
| Density: | 1.137 g/cm³ | 1.216 g/cm³ | ||||
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | ||||
| Shelf Life: | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | ||||
| Pot Life: | n/a | n/a | ||||
| Flash Point: | 24°C | 24°C | ||||
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Airless/Air-Assisted: | 130 μm | 200 μm | |
| Pressure Pot: | 111 μm | 170 μm | |
| Compliant Spray Gun: | 29 μm | 60 μm | |
Coverage: 6 square metres per litre @ 95 microns dft
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 30 minutes |
| Dry To Handle: | 6 hours |
| Dry To Recoat: | At any stage |
| Fully Cured: | 7 days |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Application Methods
| Technical Data | |||||
|---|---|---|---|---|---|
| Airless/Air-Assisted | Pressure Pot | Compliant Spray Gun | |||
| Mixing Ratio: | Ready for use | Ready for use | Base: 1 | ||
| - | - | Thinner: 20% | |||
| Thinner Options: | - | - | Thinner 2621 | ||
| Viscosity: | Ready for use | Ready for use | 60 seconds B4 cup | ||
| Spray Gun Setup: | 13 - 15 thou 40/50° | 2.0 | 1.4 - 1.6 | ||
| Number Of Coats (Guide Only): | 1 - 2 full coats | 2 full coat | 2 full coats | ||
| Flash Off: | 15 minutes between coats | 15 minutes between coats | 15 minutes between coats | ||
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
| Information On Basic Physical And Chemical Properties | ||||||
|---|---|---|---|---|---|---|
| Raincoat 2 70% Gloss Colours | Raincoat 2 70% Gloss Colours (contains lead) | |||||
| Form: | According to product specification | According to product specification | ||||
| Colour: | According to product specification | According to product specification | ||||
| Odour: | Characteristic | Characteristic | ||||
| Odour Threshold: | Not determined | Not determined | ||||
| pH-value 20°C: | Not determined | Not determined | ||||
| Melting point/freezing point: | Undetermined | Undetermined | ||||
| Initial boiling point and boiling range: | 130°C | 130°C | ||||
| Flash Point: | 24°C | 24°C | ||||
| Flammability (solid, gas): | Not applicable | Not applicable | ||||
| Ignition temperature: | 500°C | 500°C | ||||
| Decomposition temperature: | Not determined. | Not determined. | ||||
| Auto-ignition temperature: | Product is not selfigniting. | Product is not selfigniting. | ||||
| Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | ||||
| Explosion limits: Lower: | 1.1 Vol% | 1.1 Vol% | ||||
| Explosion limits: Upper: | 7 Vol% | 7 Vol% | ||||
| Vapour pressure at 20°C: | 6.7 - 8.2 hPa | 6.7 - 8.2 hPa | ||||
| Density at 20°C: | 1.137 g/cm³ | 1.216 g/cm³ | ||||
| Relative density: | Not determined | Not determined | ||||
| Vapour density: | Not determined | Not determined | ||||
| Evaporation rate: | Not determined | Not determined | ||||
| Solubility in / Miscibility with water: | NOT MISCIBLE | NOT MISCIBLE | ||||
| Partition coefficient: n-octanol/water: | Not determined | Not determined | ||||
| Viscosity: Dynamic at 20°C: | 300 mPas | 300 mPas | ||||
| Viscosity: Kinematic: | Not determined | Not determined | ||||
| Solvent content: Organic solvents: | 34.3% | 71.2% | ||||
| Solids content: | 68.8% | 75.5% | ||||
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Suitable respiratory equipment should be worn when spraying.
- Contaminated rags, spray booth filters or other substrates should be segregated from other chemical waste, soaked with water and disposed of in a non-combustible container with a tight fitting lid.
Product Details
TOPRAIN2-70
Data sheet
- Manufacturer
- HMG Paints Limited
- For Use On
- Metal
- Application Method
- Airless Spray, Spray
- Single, Two or Three Pack
- Single
- Pack Size
- 5L, 15L
- Mixing Ratio
- Compliant Spray Gun: Base 1 - Thinner 20%
- Touch Dry (at 20°C)
- 30 minutes
- Dry to Handle (at 20°C)
- 6 hours
- Dry to Recoat (at 20°C)
- At any stage
- Fully Cured (at 20°C)
- 7 days
- Recommended Thinner/Cleaner
- Thinner 2621
- Density
- Raincoat 2 70% Gloss Colours: 1.137 g/cm³ - Raincoat 2 70% Gloss Colours (contains lead): 1.216 g/cm³
- Solids by Volume
- Raincoat 2 70% Gloss Colours: 68.8 % - Raincoat 2 70% Gloss Colours (contains lead): 71.2 %
- VOC
- 0.380kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Recommended Dry Film Thickness
- Airless/Air-Assisted: 130 μm - Pressure Pot: 111 μm - Compliant Spray Gun: 29 μm
- Recommended Wet Film Thickness
- Airless/Air-Assisted: 200 μm - Pressure Pot: 170 μm - Compliant Spray Gun: 60 μm
- UN Number
- UN1263
- Brand
- HMG
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Raincoat 2 70 Percent Gloss is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like