Sherwin-Williams Macropoxy C88 is a high performance, 2-pack multi purpose tolerant epoxy with resistance to moisture, solvents, acids, abrasion, alkalis, weather and more.
Coo-Var Hammercote Hammered Finish
Coo-Var Hammercote Hammered Finish is a premium quality durable coating which provides a glossy hammered finish. As a rust resistant coating Hammercote provides a long lasting finish for metal, ironwork and many other suitably well prepared surfaces. This coating is fast drying and suitable for interior and exterior use. Hammercote is highly versatile being convenient and easy to use.
- Direct to prepared metal or suitable primer
- Full hardness is reached after several days
- Very fast drying
- Also available in smooth finish
- Heat resistant up to 150°C
Coo-Var Hammercote Hammered Finish is a premium quality durable coating which provides a glossy hammered finish. As a rust resistant coating Hammercote provides a long lasting finish for metal, ironwork and many other suitably well prepared surfaces. This coating is fast drying and suitable for interior and exterior use. Hamemrcote is highly versatile being convenient and easy to use.
For applications where a hard, durable, metallic finish is required. Wrought iron, cast metal parts, tool boxes, machinery, instruments etc
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Bare steel should be free from dust, rust and scale. Blast cleaning to SA 2½ is recommended. If blast cleaning is impractical, mechanical cleaning should be employed but hand cleaning does not clean the steel to the required degree. Any oil or grease should be removed with solvent before de-rusting. Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts welds, etc. Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.
As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.
Direct to prepared metal or Rapidry Zinc Phosphate Primer.
Hammercote Hammered Finish
Coo-Var Hammercote is also available in a smooth finish - Coo-Var Hammercote Smooth Finish
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Base Type
- Brush, Spray
- 10m² per litre
- Recommended Thinner/Cleaner
- Do Not Thin
- Touch Dry
- 30 Mins
- UN Number
|David Altoft on 29/06/2017|| |
Question: What exactly is the temperature rating/ heat resistance capabilities for this paint (HAMMERCOTE_ HAMMERED ENAMEL BLACK). Can it withstand temperatures of up to 200 degrees c. Thanks.
Coo-Var Hammercote Hammered Finish is heat resistant to 150°C, for temperatures over this, see our range of Heat Resistant Paints.
Jotun Jotacote Universal N10 is specially designed as a universal, all round, all year, new building coating where fast dry to handle times are required. Jotun Jotacote Universal N10 can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments and is replacing the current Jotacote Universal...
A high build, glossy finish that has outstanding weathering resistance and colour retention. Suitable for application over a number of Carboline primers and intermediates. Top Features Outstanding performance propertie Suitable for application direct to inorganic zincs Application by spray, brush or roller
Tor Non-Tainting Bitumen Solution, used to coat steelwork such as water tanks, hay sheds, etc by brush, roller or airless sprayer, drying for recoating after 8 hours. Allow tanks 7 days drying before refilling with water, allowing to stand for 24 hours before discharge and then re-fill. Ideal for farm buildings Good coverage, up to 10...
A solvent-less, high gloss, smooth epoxy coating for the lining of gas transmission pipelines. It’s hard, smooth surface aids in the flow of gas by reducing turbulence while protecting the interior surfaces from corrosion. Tested in accordance with API RP 5L2 for gas transmission pipelines. Top Features Improves flow efficiency in gas...
A two component, 100% solids epoxy based intumescent coating and designed to provide jet fire and hydrocarbon fire protection for structural elements in industrial, petrochemical, oil and gas, offshore and refining industries. Top Features Full jet fire certification in accordance with ISO 22899 Excellent hydrocarbon pool fire protection...
Rust-Oleum 9100 High Performance Epoxy is a two-pack, glossy epoxy for metal, walls and floors. It is the most efficient epoxy system providing a very hard coating with high layer thickness giving lasting results with even a single coat application.
Sikalastic 844 XT is a two part, elastic, very fast curing modified polyurea spray applied membrane where exposure to high acidic and alkaline chemical concentrations are present. Features and Benefits: High acidic and alkaline chemical resistance High resistance to microbial waste and biogenic sulphuric acid Fast reactivity and cure...
Jotun Jotamastic 87 Alu provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub zero surface temperatures.
An epoxy lining for “dry” natural gas transmission pipelines. It is designed to increase flow efficiency of natural gas in pipelines. It fully meets criteria of API RP 5L2 for gas transmission pipelines. Top Features Improves flow efficiency in gas pipes Excellent flow and leveling Single-coat application Hard, smooth, glossy finish
Jotun Jotamastic 90 White B16 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. It has been specifically developed to meet the requirements of UK Highway Agency Item 116 for use on bridges and highway infrastructure.
Tor HB Zinc Phosphate White is a quick-drying corrosion-resistant finish for machinery that provides good coverage and fast drying times, able to be overcoated after just 30 minutes. A blend of alkyd resin pigments with inorganic pigments, including zinc phosphate, and extenders and thinned essentially with Xylene to facilitate application...
Teamac Chassis Black is a quick drying anti-corrosive finish giving a durable, protective coating to vehicle chassis. Ideal for metal and steel areas on cars, trailers, trucks and buses etc.
A high performance pipe coating specially designed for the protection of FBE coated pipeline from gouge and mechanical damage during directional drilling or slip bore installations. It absorbs the destructive energy and minimizes coating damage. Top Features Excellent gouge and abrasion resistance High crosslink density results in tough...
Jotun Jotamastic Plus is a two component amine cured epoxy mastic coating that is surface tolerant, high solids and high build. It is specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity and can be used as a primer, mid coat, finish...
Jotun Conseal Touch-Up is a one component physically drying acrylic coating with a matt finish. Manufactured by Jotun, this is a high build product that is fast drying and can be used direct to metal. Ideal as a primer/topcoat in atmospheric environments, it can be applied at sub zero surface temperatures.