Rust-Oleum Noxyde Peganox
  • Rust-Oleum Noxyde Peganox
  • Rust-Oleum Noxyde Peganox

Rust-Oleum Mathys Noxyde Peganox

405.10.5
RUS509

Rust-Oleum Mathys Noxyde Peganox is a water based, low VOC, single component, elastomeric coating that provides rust-proofing, corrosion and waterproofing protection optimized for brush or roller application. It forms an anti corrosive membrane that has a high resistance to water, salt spray, acid and aggressive environments making it virtually unaffected over time.

  • 7 colours available
  • 200% elasticity
  • Excellent flow
  • Impact resistant
  • Primer and topcoat in one
  • Ideal when spray application is not possible
  • Thinner coating than Noxyde or Pegarust giving a lower cost per m²
  • 5 Years product guarantee*

Coverage Calculator

Colour
Pick a Colour
  • Current colour: White - RAL9010
Close colour picker
  • 40 White
  • Black - RAL9004
  • White - RAL9010
  • Steel Grey - RAL7001
  • Anthracite Grey - RAL7016
  • Light Grey - RAL7035
Size
Finish
£49.04(ex. VAT)
£58.85 (inc. VAT)
Quantity
Please choose your colour
In Stock and Available for Delivery (See Delivery Options Below)

Description

Rust-Oleum Mathys Noxyde Peganox

Rust-Oleum Mathys Noxyde Peganox is a water based, low VOC, single component, elastomeric coating that provides rust-proofing, corrosion and waterproofing protection optimized for brush or roller application. It forms an anti corrosive membrane that has a high resistance to water, salt spray, acid and aggressive environments making it virtually unaffected over time.

Rust-Oleum Mathys Noxyde Peganox combines flexibility, strong adhesion, water resistance, excellent edge coverage and anti-corrosive pigments while requiring minimal surface preparation. Rust-Oleum Mathys Noxyde Peganox is a single pack water-based elastic coating ideal for use on metal cladding, pipe lines, railings, containers and more made from iron, steel, special alloys, galvanised and metallised iron and steel, aluminium, copper, zinc, lead, etc.



Features & Benefits

  • Good corrosion protection and waterproofing
  • Noxyde technology, optimized for brush or roller application.
  • 200% elasticity
  • Excellent flow
  • Water-based formulation
  • Impact resistant
  • Primer and topcoat in one
  • Ideal when spray application is not possible
  • Thinner coating than Noxyde or Pegarust giving a lower cost per m²
  • 5 Years product guarantee*

Rust-Oleum Mathys Noxyde Peganox is a rust preventive elastomeric coating that offers excellent protection and optimized appearance. Rust-Oleum Mathys Noxyde Peganox utilises the same technology as Noxyde, but has been specially designed for brush and roller applications.

* All guarantees are subject to approval by our Technical Department prior to purchase and/or use.



30 years track record!

Noxyde has been tested by many institutes and the results are phenomenal with reports of “unsurpassed corrosion control”. Since 1972, Peganox has been applied all over the world in many different climates, from very hot and dry to humid, rural-coastal, onshore and offshore... No impact upon the product's effectiveness was recorded, therefore Peganox is the number one choice for metal protection.

The Noxyde Family:

  • Rust-Oleum Mathys Noxyde The original formula for spray application (350 µm), Maximum corrosion protection and waterproofing

  • Rust-Oleum Mathys Noxyde Peganox Noxyde formulation optimised for brush and roller application (150 µm)

  • Rust-Oleum Mathys Noxyde Pegarust Solvent based formulation for lower temperatures down to 0ºC 



Rust-Oleum Mathys Noxyde Peganox is a premium state-of-the-art, easy-to-use product ideal for long-term corrosion protection of metal surfaces. Its unique formulation performs like no other coating on the market and offers unsurpassed rust protection with minimal labour. It is an excellent over coating and alternative to sandblasting.



Technical

  • Density: 1,2
  • Gloss Level: Satin
  • Corrosion Class: C4 high protection
  • Solids content in volume: 48 %
  • Solids Content in weight: 58 %



Drying Times At 20°C/RH 50%

  • Touch dry: 1 hour
  • Dry to handle: 2 hours
  • Dry to recoat: 6 hours
  • Fully cured: 2 days



Theoretical Consumption

2 coats of minimum 200 g/m² (5 m²/kg)



Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.



Surface Preparation

Apply the usual derusting procedures (min. Sa 2 sand blasting, min. St 2 steel brush, etc.) or by high-pressure water (min. 600 bars). Dedust well after sand blasting.



Directions For Use

To ensure homogeneity, coating materials should be thoroughly stirred prior to use.



Application Conditions

Temperature between 8 and 55°C. Air humidity max. 80% R.H. The substrate temperature must be at least 5°C above dew point.



Application Methods

  • Brush: Apply undiluted.
  • Roller: Apply undiluted.
  • Airless Spray: Nozzle: 11 - 13 / Pressure: 220 bars. Diluted with maximum 3% volume of wate
  • Air-Atomised Spray: Apply undiluted.



Remarks

When used inside, provide for adequate ventilation. During work stoppage, fully immerse brush or nozzle in water, empty and clean the tubes. On non-ferrous substrates, use PVDF Primer or Pegalink as adhesion primer first.

Product Details
509-900356

Data sheet

Manufacturer
Mathys
For Use By
Professional Use
Interior / Exterior Use
Exterior
Water / Solvent Based
Water
For Use On
Ferrous metals
Non-ferrous metals
Application Method
Brush
roller
spray
Sheen
Satin gloss
Colour
Standard / Ready Mixed
VOC Levels
Ultra-Low (5-49 g/l)
Single, Two or Three Pack
Single Pack
Product Certifications
Corrosion class C4
Pack Size
5KG
Dry to Handle (at 20°C)
2 hours
Dry to Recoat (at 20°C)
6 hours
Fully Cured (at 20°C)
2 days
Coverage
5m² per KG
Max. Application Temperature
55°C
Min. Application Temperature
8°C
Density
1,2
Solids by Volume
48 %
Touch Dry
1 hour
Recommended Dry Film Thickness
80 µm
Recommended Wet Film Thickness
165 µm
UN Number
UN 3082
Base Type
Water-Based
Suitable For Use On
Containers
Suitable For Use On
Aluminium
Suitable For Use On
Metal Cladding
Suitable For Use On
Galvanised Steel
Suitable For Use On
Special Alloys
Suitable For Use On
Railings
Suitable For Use On
Zinc
Suitable For Use On
Pipe Lines
Suitable For Use On
Steel
Suitable For Use On
Copper
Suitable For Use On
Lead
Finish
Satin Gloss
Application Method
Brush
Application Method
Spray
Application Method
Roller
Usages
Elastomeric Coating
Usages
Waterproofing
Usages
Anti-Corrosion
Product Type
Primer & Topcoat
Fastest Delivery
Next Working Day
Colour Family
Grey
Colour Family
White
Colour Family
Anthracite Grey
Colour Family
Black
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Kath on 2023-07-12 17:15:01
Question: 

Hi, Is this product suitable to paint a horsebox with please? Also how many litres is 5kg?? If its not, could you please recommend a product, I will be painting it with a roller and brush and could also do with a roof sealant please. Thank you so much in advance :)

Answer from Rawlins’ Technical Team: 

Assuming you are looking to paint the vertical areas of the horse box and it is made of steel, it is clean, dry, souund and prepared as detailed in the technical data sheet this could be used. 

But it does have a limited colour range, for a better colour range you could consider Rust-Oleum CombiColor Original.

This can be mixed to many RAL, NCS or BS colours in a gloss or satin finish.

For use with Combicolor Original if there are any bare metal areas, this should be primed first.

For steel prime with Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion.

For galvanised steel prime with Rust-Oleum 3302 CombiPrimer Adhesion Primer.

For the roof you could consider Rust-Oleum Mathys Fillcoat.

questions mark on 2023-02-28 12:13:11
Question: 

Good afternoon I’m looking for a paint to go onto new steel beams (not galvanised) which need added protection. Will this be suitable . 4 beams at 5m lengths . How much will I need Thank you in advance

Answer from Rawlins’ Technical Team: 

Assuming no level of fire protection is required, the steels are bare, clean, dry, sound and prepared as detailed in the technical data sheet this product can be used.

The usual derusting procedures should be undertaken (min. Sa 2 sand blasting, min. St 2 steel brush, etc.) or by high-pressure water (min. 600 bars). Dedust well after sand blasting.

The coverage rate for this product is 200g per m² per coat.

Two coats minimum are recommended.

questions Tom on 2022-07-11 12:49:04
Question: 

Good afternoon, We are looking for a paint with the properties stated but for an environment with a relatively high temperature (approx 150C) will Rust-Oleum Mathys Noxyde Peganox withstand those sorts of temps? Kind regards Tom

Answer from Rawlins’ Technical Team: 

Thank you for the enquiry, will need more information and pictures of the project to assist with this enquiry, please can you send these to [email protected]

questions Lee Waters on 2021-09-01 11:24:25
Question: 

IS the Peganox classed as a High Build Zinc Phosphate Primer and is it available in white ?

Answer from Rawlins’ Technical Team: 

Rust-Oleum Mathys Noxyde Peganox is a water based, low VOC, single component, elastomeric coating that provides rust-proofing, corrosion and waterproofing protection optimized for brush or roller application. It wouldn;t be described as a high build primer, more a direct to metal anti-corrosive finish and yes, it is available in white.

questions Richard Megeary on 2019-06-27 13:24:19
Question: 

We are looking at an application for a low fume paint, to use on an Air Handling Unit Fan, in a Hospital. The Air Handling unit will only be taken off line for the time it takes to rub down the fan and paint it. Will this paint be suitable?

Answer from Rawlins’ Technical Team: 

Rust-Oleum Mathys Noxyde Peganox is a water based paint and so absolutely can be said to be a “low fume paint”. However even water based paints still have a “smell” to them – for example, even painting emulsion to decorate your home. So this must be borne in mind by the client – especially in an environment such as a hospital, that we cannot, and do not, make any specific claims regarding any possible odours noticed within the hospital after application whilst still drying.

questions Richard Tobin on 2019-04-08 20:39:01
Question: 

Hi, I'm thinking of using Noxyde Peganox to treat some rusty areas of bodywork /chassis on my van. I know it is'nt specified for this but I'm looking for a brush on system to patch up smallish areas. Question 1. After manually de rusting with angle grinder/ wire brush would you recommend using a rust converter such as Fertan or Aquasteel etc? Question 2. Although this is a top coat, can I overpaint with other paints inorder to colour match different areas? If so what types? Question 3. What is the shelf life of a can once it has been opened? Thanks

Answer from Rawlins’ Technical Team: 

Rust-Oleum Mathys Noxyde Pegarust can be applied directly bare metal but doesn;t leave a hard, abrasion resistant finish. We would recommend Jotun Jotamastic 90 for your application as this is a surface tolerant, abrasion resistant, 2 part epoxy coating available in most RAL or BS colours and providing no areas are exposed to UV, would be left as a final finish.

questions Calvin Jones on 2018-07-12 00:49:20
Question: 

Do you REALLY have to prime old galvanised sheeting? The data sheet on rustoleum.com says... "PRIMING Normally not required. Exceptions include: New galvanized steel: Prime with 3202 Clear Blue Undercoat Smooth metals: Prime with Pegalink" There is another (european?) data sheet which just says 'use primer with non-ferrous metals' so that seems clear. But then again another online company i spoke to said it was fine on aged galvaised... sorry i`m confused and i need the right answer or im wasting money on an expensive primer or a lot of time on a roof coating that wont last! Thanks.

Answer from Rawlins’ Technical Team: 

We are not sure which data sheet you have read which advises the use of Rust-Oleum 3202 Galvinoleum Primer, but to our knowledge this has never been advised by Rust-Oleum UK.

You can see the latest PDS (Product Data Sheet) for Rust-Oleum Mathys Noxyde Peganox on our website on the product page under the 'Download' section. This states 'On non-ferrous substrates, use PVDF Primer or Pegalink as adhesion primer first.'

In answer to your query (do you REALLY have to use a primer) – well that depends on the full circumstances of the project i.e. condition of the substrate, expectation of performance levels, expectation of life span etc. So it is indeed POSSIBLE to apply Rust-Oleum Mathys Noxyde Peganox directly to correctly prepared non-ferrous substrates, but Rust-Oleum's best advice would be to use a primer.

questions Donna  on 2018-07-11 10:59:02
Question: 

Hi it's says it is a primer and top coat in one so would I be able to paint my van for protection ? Also is it a paint and ehat colour is it plz.?

Answer from Rawlins’ Technical Team: 

Although we do not offer automotive paints, many customers have used Rust-Oleum CombiColor to hand paint a vehicle.

questions Richard on 2018-03-18 11:19:32
Question: 

I have some secondhand galvanised corrugated cladding which i want to paint. The cladding has areas of old paint and rust. Would your noxyde peganox paint be suitable to paint directly onto this?

Answer from Rawlins’ Technical Team: 

After cleaning and removal of all loose rust, flaking paint, etc. if you want to apply Rust-Oleum Mathys Noxyde Peganox you would need to first prime with Rust-Oleum Mathys Pegalink Universal Adhesion Primer. Alternatively Rust-Oleum Mathys Noxyde Pegarust could be applied directly without the need of a primer.

questions Andy Jones on 2017-06-02 16:27:27
Question: Is Noxyde Peganox suitable to use on galvanised roller shutter doors ? Thanks and Regards Andy Jones
Answer from Rawlins’ Technical Team: 

Yes but areas must be first primed with either Rust-Oleum Mathys Pegalink Universal Adhesion Primer or Rust-Oleum PVDF Primer.

  

Question about the product

* Required fields
(read)
Send

IMPORTANT SHIPPING & DELIVERY INFORMATION

Rust-Oleum Mathys Noxyde Peganox is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT



COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage

    

You might also like

Rust-Oleum PVDF Primer

Rust-Oleum PVDF Primer is a single pack super adhesion primer for PVDF or PVF2 cladding, galvanised steel, zinc and aluminium. Also ideal primer for difficult metal substrates Tack-free after only 30 minutes Overcoat with NOXYDE for years of protection Coverage Calculator More Information Delivery Info

Price £54.48 (ex. VAT)
In Stock and Available for Delivery

General Painting Application Kit

General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

Price £8.02 (ex. VAT)
In Stock and Available for Delivery

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

Price £17.22 (ex. VAT)
In Stock and Available for Delivery