The Zinga film galvanising system in the convenience of a 500ml aerosol spray can. Use to repair or touch up galvanising, damaged or old hot-dipped, other zinc coated structures or products previously treated with Zinga in marine structures, new steel and galvanising, cast-iron and aluminium alloys. Repair for worn or damaged hot-dip...
Coo-Var Hammercote Hammered Aerosol
Coo-Var Hammercote Hammered Aerosol is a fast-drying coating which gives a hard and durable hammered finish direct to metal objects in a handy 400ml aerosol.
- Apply direct to metal or primer
- Very fast drying
- Full hardness reached after several days
- Available in black and silver grey
Coo-Var Hammercote Hammered Aerosol is an additional product to the ever popular Hammercote Range. Available in a hammered finish in black, silver and white in a 400ml can. Easy to apply and gives a great finish.
- Wrought iron
Coo-Var Hammercote Hammered Finish is a fast-drying coating which gives a hard, hammered finish to metal objects. Suitable for applications where a hard and durable hammered gloss finish is required on metal objects.
After 2 mins but before 15 mins
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 4m² per aerosol
- Touch Dry
- 30 mins
Be the first to ask a question about this product!
Jotun Jotamastic 90 Alu B15 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids, high build product. It is an aluminium pigmented product specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments...
Teamac Farm Oxide Paint is an economical, general purpose, versatile product giving economical protection and decoration which can be used for the maintenance of structural steel, cladding etc. when applied to properly prepared surfaces. May be used coat on coat and dries to a durable gloss finish. Can be applied directly to prepared iron or steel.
Self-priming and suitable for application over most existing coatings, and tightly adherent rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions. Top Features Excellent chemical resistance Surface tolerant characteristics Self-priming and primer/finish...
Jotun Jotamastic 90 WG is a 'Wintergrade' version of Jotamastic 90 to aid application in lower temperatures and to provide faster drying and curing times. It is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. This product is tintable in a wide range of colours.
A low-temperature and rapid curing primer/finish with an extended recoat window. Provides excellent corrosion resistance as a primer, intermediate or finish on steel substrates. Top Features Low temperature cure characteristics. Rapid handling for in-shop applications. Low yellowing compared to other epoxies. VOC compliant to current...
An all-purpose immersion-grade epoxy that has a variety of attributes including low-temperature cure, surface tolerance and fast recoat times. Can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Top Features Excellent corrosion protection Excellent application characteristics Fast...
Jotun Jotamastic SF Alu is a two component polyamine cured epoxy mastic coating aluminium pigmented to provide a metallic silvery finish that is a surface tolerant, solvent free, high build product well suited for early immersion. Specially designed for areas where optimum surface preparation is not possible or desired.
International Intergard 345 is a two component, low VOC, high solids, fast curing epoxy primer/finish containing zinc phosphate anti-corrosive pigmentation. Suitable for use as a one or two coat primer/finish coating or as an intermediate over recommended anti-corrosive primers.
International Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings.
A two component, 100% solids epoxy based intumescent coating and designed to provide jet fire and hydrocarbon fire protection for structural elements in industrial, petrochemical, oil and gas, offshore and refining industries. Top Features Full jet fire certification in accordance with ISO 22899 Excellent hydrocarbon pool fire protection...
This high performance glass-flake filled coating was designed for application over steel or concrete in extreme chemical exposures. It is resistant to a wide variety of aggressive chemicals, including organic and inorganic acids, most alkalies, and many solvents. This product is available as POA. Click here to email us for more information....
A glass flake reinforced, abrasion resistant epoxy coating that is surface tolerant, fast drying, high solids and high build. Specially designed for areas where increased abrasion and impact resistance is needed such as decks, walkways and landing areas.
A high quality, high build, general purpose gloss paint for use on a wide range of suitably prepared surfaces such as wood, metal, asbestos, stable felt and more, available in a wide range of colours.
Jotun Penguard Express CF is a two component polyamide cured, colour stable epoxy primer/finish coating that is fast drying, high solids and high build. It can be used as primer, mid coat or finish coat in atmospheric environments and is specially designed for new construction where fast dry to handle and over coating times are required.
An advanced 100% solids, hybrid epoxy pipeline coating. Polyclad 975 has performance properties designed for corrosion protection of steel and ductile iron pipe exteriors, girth welds or tie-ins. Top Features Quick dry to touch and QC times Colour indicator confirms proper mixing Low temperature cure 40°F (4.4°C) Excellent cathodic...