Coo-Var Hammercote Smooth Aerosol is a fast drying coating which gives a hard, durable, smooth finish direct to metal objects in a handy 400ml aerosol. ADVANTAGES Very fast drying Full hardness after several days Apply direct to metal or primer Durable Gloss finish Rust resistant Heat resistant up to 150°C Interior/Exterior use
Teamac Metalastic Metal Protective Paint Colours
A high quality, high build, general purpose gloss paint for use on a wide range of suitably prepared surfaces such as wood, metal, asbestos, stable felt and more, available in a wide range of colours.
Teamac Metalastic Metal Protective Paint is a high quality, high build, general purpose gloss paint for use on a wide range of suitably prepared surfaces such as wood, metal, asbestos, stable felt, etc. Available in a wide range of colours.
Teamac Metalastic Protective Paint is ideal for protecting and decorating metal, wood and many other surfaces inside or outside. Frequently used in factories, warehouses, farm buildings, roofs, barns, oil tanks and general steelwork are amongst the possible applications.
- Gloss finish
- Indoor or outdoor
- Economical protection
Please note: Bituminous Black is not compatible with the other colours of Metalastic and cannot be over coated by conventional paints unless previously sealed.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 14m² per litre
- Touch Dry
- 4 Hours
Be the first to ask a question about this product!
A water-resistant epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry. This HAR version of Plasite 7159 is extremely abrasion resistant. Top...
A high performance immersion-grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. It is typically used on hot steel substrates under insulation operating continuously up to 400°F/204°C. Top Features Continuous temperature resistance to 204°C Very good flexibility Acceptable for use...
This versatile coating provides an impenetrable film for severe exposures in marine, offshore, petrochemical, pulp and paper and other aggressive environments. Top Features Excellent abrasion resistance Excellent chemical resistance Outstanding impermeability Single coat, self-priming capabilities
A high performance pipe coating specially designed for the protection of FBE coated pipeline from gouge and mechanical damage during directional drilling or slip bore installations. It absorbs the destructive energy and minimizes coating damage. Top Features Excellent gouge and abrasion resistance High crosslink density results in tough...
A high heat polymer coating used for the protection of equipment operating at elevated temperatures. It is typically used over Carbozinc® inorganic zinc primers for outstanding corrosion protection and heat resistance. Inorganic and stable polymer Outstanding durability High temperature resistance 426°C VOC compliant Cures down to 4°C...
A heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds. Top Features Good for extended exposure demands Ability to be welded through Heavy-metal free
A low-temperature and rapid curing primer/finish with an extended recoat window. Provides excellent corrosion resistance as a primer, intermediate or finish on steel substrates. Top Features Low temperature cure characteristics. Rapid handling for in-shop applications. Low yellowing compared to other epoxies. VOC compliant to current...
Jotun Jotacote Universal N10 is specially designed as a universal, all round, all year, new building coating where fast dry to handle times are required. Jotun Jotacote Universal N10 can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments and is replacing the current Jotacote Universal product.
A high performance, 100% solids structural polyurethane designed to repair Polyclad 777 or 777 PL when it has been damaged. Top Features Low temperature cure Quick cure to handle Superior wetting properties and outstanding adhesion to steel Excellent edge retention
Aquazinga, a two-pack anti-corrosion system providing cathodic protection to ferrous metals, and can be used as an alternative to hot-dip galvanisation or metallisation. Designed to withstand high temperatures (up to 600°C) and corrosive environments and severe conditions such as ballast tanks, turbine exhausts and high-heat pipelines....
Jotun Jotamastic Smart Pack is a two component amine cured epoxy mastic coating that is a surface tolerant, high solids, high build product. Specially designed for application with brush and roller with a 1:1 mixing ratio for easy use and reduced wastage. Specially designed for areas where optimum surface preparation is not possible or desired.
Self-priming and suitable for application over most existing coatings, and tightly adherent rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions. Top Features Excellent chemical resistance Surface tolerant characteristics Self-priming and primer/finish...
An aluminium-filled epoxy for steel and concrete that has excellent resistance to water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Top Features Aluminium flakes provide exceptional barrier...
A two-component polyamide cured epoxy coating with wide application in industrial and marine environments. Top Features Multi-purpose high build epoxy Compatabile with a wide range of substrates Excellent resistance against chemical spillage