Selemix 7-159 Direct Pro High Gloss (Medium)

Brand Selemix

Search ID SEL8938

Versatile, high solids 2-pack Acrylic PU finish with 6,700+ colours for direct application without a primer for steel, galvanised steel, aluminium and painted/primed surfaces.

Good anticorrosive properties - Suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting applications
Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
Product can be purchased as a Two Component Pack, or as Base or Hardener only
High gloss finish with good colour and UV stability
Also available in Slow and Fast curing versions
Hammer Effects can be achieved by the additon of Selemix 6-540
For Industrial Use Only

Product customisation

Don't forget to save your customization to be able to add to cart

Product Type

Colour Group

Size

Finish

£126.15(ex. VAT)

£151.38 (inc. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

Description

Selemix 7-159 Direct Pro High Gloss (Medium) is a versatile, high solids 2-pack Acrylic PU finish that can be applied directly to a variety of substrates without need for a primer.

It has a high gloss finish with good colour and UV stability. Its good anticorrosive properties make it suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting applications.

Application is via Air-Assisted Airless Spray or Conventional Spray.

For Industrial Use Only.

Quick Links - Click To Jump To Section:

Features & Benefits
Surface Preparation
Mixing
Application Notes
Theoretical Coverage
Drying Times
Health & Safety

Features & Benefits

Versatile, high solids 2-pack Acrylic PU finish
Can be applied directly to metal
Suitable for use on Steel, Galvanised Steel, Aluminium and Painted/Primed Surfaces
Good anticorrosive properties - Suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting applications
Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
Product can be purchased as a Two Component Pack, or as Base or Hardener only
High gloss finish with good colour and UV stability
Also available in Slow and Fast curing versions
For Industrial Use Only

Surface Preparation

Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.

Steel (Blast Cleaned):

Blast clean to ISO 8501-1 SA 2.5 with a blast profile of maximum 40 µm Rz

Steel:

Machine sand with P80-120 discs and degrease

Galvanised Steel:

Abrade with SCOTCHBRITE® and degrease

Aluminium:

Machine sand with P240-320 discs and degrease

Painted Surfaces:

Machine sand with P240-320 discs and degrease

Selemix Epoxy Primer or PU Primer:

Refer to Primer TDS for recoat time

Mixing

Thoroughly mix paint before activating and check colour before use

Features	Conventional Spray	Air-Assisted Airless
By Weight: 7-159 Topcoat 9-15x Hardener 1-159/1-160 Thinner	1000 330 100-200	1000 330 50-100
By Volume: 7-159 Topcoat 9-15x Hardener 1-159/1-160 Thinner	2.5 1 0.3-0.5 (10-20%)	2.5 1 0.1-0.3 (5-10%)
Viscosity (at 20°C):	28-35 secs DIN4	40-45 secs DIN4
Pot Life (at 20°C):	2.5-3 hours	1.5-2 hours

Mixing Ratio:

Selemix 7-159 Direct Pro High Gloss (Medium)
- 2.5 parts base : 1 part hardener

Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant binder/base and hardener/activator used.

Application Notes

Features	Conventional Spray	Airless Spray
Spraygun Setup:	Nozzle: Gravity: 1.8mm Suction: 1.8-2.0mm Pressure feed: 1.2-1.4mm	Nozzle: 9-11 thou 0.23-0.28mm
Air Pressure:	HVLP: 2 Bar Standard: 2.5-3 Bar	2.5 Bar
Fluid Pressure:	N/A	100 Bar
Number of coats:	2	2
Flash-off between coats:	15 mins	15-20 mins
Drying:	Air dry or bake at 60°C for 30-45 mins	Air dry or bake at 60°C for 30-45 mins
Flash-off before bake:	10-15 mins	10-15 mins
Wet Film Thickness:	150-175 microns (2 x 75-100µm)	150-175 microns
Dry Film Thickness:	90-110 microns	90-110 microns

Please see the Product Data Sheet for detailed Application Instructions before use.

Theoretical Coverage

Conventional Spray - 5.5-6.0 m²/L
Air-Assisted Airless Spray - 5.8-6.3 m²/L

Note: Please see the Product Data Sheet for detailed information.

Drying Times

Drying Times 20°C
Dust Free	20 mins (or 15 mins with Fast Hardener)
Touch Free	3 hours (or 2 hours with Fast Hardener)
Tape Free	6 hours (or 3 hours with Fast Hardener)
Handleable	8-10 hours (or 5-6 hours with Fast Hardener)
Hard Dry	16 hours (or 12-14 hours with Fast Hardener)
Stoving	30 minutes at 50°C (according to film thickness)
Overcoating time	Minimum: when Hard Dry Maximum: 1 months by itself without sanding
Please Note: Lower temperature or film thickness higher than 100µm will extend drying times

Health & Safety

For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
THIS PRODUCT IS FOR INDUSTRIAL USE ONLY

Product Details

Reference 7-159/E3.75K + 9-154/E1

Data sheet

Manufacturer: Selemix
For Use By: Industrial Use
Water / Solvent Based: Solvent Based
For Use On: Steel
Galvanised Steel
Aluminium
Painted Surfaces
Sheen: 90% Gloss
Single, Two or Three Pack: Two Pack
Mixing Ratio: 2.5 to 1
Application: Spray
Airless Spray
Pot Life (at 20°C): 2.5-3 hours Conventional Spray / 1.5-2 hours Airless Spray
Recommended Dry Film Thickness: 90-110 microns
Recommended Wet Film Thickness: 150-175 microns
UN Number (Activator): UN1263
UN Number (Base): UN1263
Hard Dry: 16 hours (or 12-14 hours with Fast Hardener)
Dust Dry (at 20°C): 20 mins (or 15 mins with Fast Hardener)
Colour(s): Fully Tintable
Substrate: Galvanised Steel
Substrate: Aluminium
Substrate: Steel
Substrate: Blasted Steel
Substrate: Painted / Primed
Usages: High Chemical Resistance
Usages: High Solids
Usages: Low VOC
Usages: High Corrosion Resistance
Usages: High UV Resistance
Usages: Process Efficiency
Product Type: Direct to Substrate
Technologies: 2K
Technologies: Solventborne
Application Methods: Airmix
Application Methods: Conventional
Application Methods: Electrostatic

Attachments

Download

Product Data Sheet

Download

Safety Data Sheet - Base

Download

Safety Data Sheet - Activator

Download

Selemix System Technical Chart

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Send us your question

Be the first to ask a question about this product!

Selemix 7-159 Direct Pro High Gloss (Slow)

Selemix 7-159 Direct Pro High Gloss (Slow) is a versatile, high solids 2-pack Acrylic PU finish that can be applied directly to a variety of substrates without need for a primer. Suitable for use on Steel, Galvanised Steel, Aluminium and Painted/Primed Surfaces Good anticorrosive properties - Suitable for the finishing and protection of...

£126.15 (ex. VAT)

Shop now