• Rust-Oleum Noxyde

Rust-Oleum Mathys Noxyde - 20KG

5.10.5.20KG
RUS8993

Unequaled corrosion protection designed for spraying, with 20 years guarantee, excellent waterproofing and elasticity.

  • Primer and topcoat in one
  • 7 colours available, including RAL 7016 Anthracite Grey
  • Impact resistant
  • Prevents rust from spreading
  • UV resistant and protects against abrasion
  • 200% elastic coat does not crack or peel
  • Dry fall: saves preparation & clean up time
  • 20 Years product guarantee*
  • In stock, ready for immediate dispatch!

Colour
  • Current colour: 10 English Red
Choose a colour
Close colour picker
  • RAL7016 - Anthracite Grey
  • RAL7035 - Light Grey
  • RAL9010 - White
  • 10 English Red
  • 20 Grey Green
  • Goosewing Grey - BS 10A05
  • RAL7001 - Steel Grey
Size
Finish
£189.95
£227.94 Incl. VAT
Quantity
Product not available
Last Items in Stock and Available for Delivery (See Delivery Options Below)

Description

Rust-Oleum Mathys Noxyde is a water-based, single-component paint, designed for easy spray application and yet gives the same protection as a complicated and more expensive polyurethane systems. Rust-Oleum Mathys Noxyde forms a thick anticorrosive membrane that offers excellent protection against water, salt spray and aggressive environments. Independent research as per the ISO 12944 standard demonstrates that Noxyde is the absolute BEST in corrosive protection - it even offers more than 20 years of protection in the highest corrosion class C5-M.

Rust-Oleum Mathys Noxyde combines flexibility, strong adhesion, water resistance, excellent edge coverage and anti-corrosive pigments while requiring minimal surface preparation. Rust-Oleum Mathys Noxyde is a single pack water-based elastic coating ideal for use on metal cladding, metal roofs, bridges, silos, electrical isolation and more made from iron, steel, copper, aluminium, plastisol, zinc, lead, galvanised metal and PVDF (with a special primer).



Further Features & Benefits


  • Water-based formulation
  • Primer and topcoat in one
  • Ultimate corrosion protection, even in severe conditions
  • Impact resistant
  • Designed for spray application
  • Prevents rust from spreading
  • UV resistant and protects against abrasion
  • 200% elastic coat does not crack or peel
  • Dry fall: saves preparation & clean up time
  • 20 Years product guarantee*

* All guarantees are subject to approval by our Technical Department prior to purchase and/or use.

30 years track record!

Noxyde has been tested by many institutes and the results are phenomenal with reports of “unsurpassed corrosion control”. Since 1972, it has been applied all over the world in many different climates, from very hot and dry to humid, rural-coastal, onshore and offshore... No impact upon the product's effectiveness was recorded, therefore it is the number one choice for metal protection. See Project References in the "Attachments" section above for details of Noxyde used on the Golden Gate Bridge in San Francisco, and storage tanks in Rotterdam harbour.

Rust-Oleum Mathys Noxyde is a premium, state-of-the-art, easy-to-use product ideal for long-term corrosion protection of metal surfaces. Its unique formulation performs like no other coating on the market and offers unsurpassed rust protection with minimal labour. It is an excellent over coating and alternative to sandblasting, a more economical solution to epoxy/polyurethane coatings.



The Noxyde Family


  • Noxyde - The original formula for spray application (350 µm), Maximum corrosion protection and waterproofing. For metal cladding, metal roofs, bridges, silos, electrical isolation and more.
    • Approved for corrosion class C5-M high (ISO 12944)
    • Excellent waterproofing for metal roofs
    • Water-based coating
    • Does not crack or peel
    • 20 Years product guarantee*

  • Peganox - Noxyde formulation optimised for brush and roller application (150 µm). Ideal for metal cladding, pipe lines, railings, containers and more.
    • Best flow of the 3 products, aesthetic finish
    • Thinner, water-based coating
    • When spray-application is not possible
    • 5 Years product guarantee*

  • Pegarust - Solvent based formulation for lower temperatures down to 0ºC. For metal cladding, pipe lines, bridges, metal constructions, electricity posts and more.
    • Similar protection to Noxyde
    • Apply on slightly moist surfaces
    • Approved for corrosion class C5-M medium (ISO 12944)
    • 7 Years product guarantee*

* All guarantees are subject to approval by our Technical Department prior to purchase and/or use.



Recommended Use


  • As rust prevention or waterproofing:
    • Iron
    • Steel
    • Special alloys
    • Galvanised and metallised iron and steel
    • Aluminium
    • Copper
    • Zinc
    • Lead, etc
  • Diluted with 25% water as an adhesion primer coat on slightly or non porous substrates such as:
    • Glass
    • Smooth bricks and concrete
    • Ceramics
    • Tiles, etc



TECHNICAL DATA
Density: 1,2 - 1,3
Gloss Level: Satin
Gloss level at 60º: 20.00%
Corrosion Class: C5 very high protection
Solids content in volume: 55 % ± 3 %
Solids Content in weight: 62 % ± 3 %



DRYING TIMES AT 20°C/RH 50%
Touch dry: 1,5 hours
Dry to handle: 3 hours
Dry to recoat: 24 hours
Fully cured: 2 weeks



Recommended Wet Film Thickness

320 μm

Recommended Dry Film Thickness

175 μm



THEORETICAL CONSUMPTION
Brush/roller: 200 - 300 g/m²/coat
Airless: 300 - 500 g/m²/coat
Total consumption for optimal rust preventive protection: 800 g/m² = 350 μm dry film thickness

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.



Preparation & Application




Surface Preparation

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning (max. 200 Bars) in combination with appropriate detergents. The substrate has to be dust free and made rust free by means of sandblasting (Sa2, St2) or high pressure water jetting (min. 600 Bars). After jetting, the substrate has to be dust free. On new galvanised surfaces, new zinc, aluminium, stainless steel, apply first a coat of Pegalink. On ferrous substrates, apply Noxyde in red or grey as the first coat. In all instances apply contrasting Noxyde colours for subsequent layers.

Directions For Use

To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

Application Conditions

Temperature between 8 and 55°C / Air humidity max. 80% R.H.

The substrate temperature must be at least 5°C above dew point.

Application & Thinning For Brush Applications

Undiluted as a rust preventive paint.

Diluted with approximately 25% volume water as an adhesion primer (consumption about 100 g/m²).

Application & Thinning For Roller Applications

Undiluted as a rust preventive paint. Diluted with approximately 25% volume water as an adhesion primer (consumption about 100 g/m²)

Application & Thinning For Airless Spray Applications

Undiluted. Nozzle: 13 - 17 / Pressure: min. 170 bars. Nozzle and pressure can vary depending on the type of substrate, equipment and the experience of the applicator.

Cleaning of Equipment & Spills

Water

Notes

When used for interior works, provide for adequate ventilation.During work stoppage, fully immerse brush or nozzle in water. Product is recoatable after 24 hours with itself, Coating PRT, high gloss alkyd enamels, high and satin gloss acrylic dispersion paints.



SAFETY DATA
VOC level: 15 g/l
VOC readymix: 15 g/l
VOC category: A/i
VOC limit: 140 g/l
Grenelle: Exterior
Flashpoint: Not flammable

Product Details
5.10.5.20KG

Data sheet

Manufacturer
Mathys
For Use By
Professional Use
For Use By
Industrial Use
Interior / Exterior Use
Exterior
Water / Solvent Based
Water
Water / Solvent Based
Water
For Use On
Iron, steel, special alloys, galvanised, aluminium, copper, zinc, lead, glass, brick, concrete, ceramic, tile,
Application Method
Brush, roller, spray
Sheen
Satin
Colour
Standard / Ready Mixed
VOC Levels
Ultra-Low (5-49 g/l)
Single, Two or Three Pack
Single
Single, Two or Three Pack
Single
Product Certifications
Corrosion class C5-M
Pack Size
20KG
Dry to Handle (at 20°C)
3 hours (at 20°C)
Coverage
1m² per 200-500g
Max. Application Temperature
55°C
Min. Application Temperature
8°C
Density
1,2 - 1,3
Solids by Volume
55 % ± 3 %
VOC
15 g/l
Touch Dry
1 Hour 30 Mins (at 20°C)
Recommended Dry Film Thickness
175 μm
Recommended Wet Film Thickness
320 μm
UN Number
UN3082
Suitable For Use On
Roof
Usages
Metal
Product Type
Primer & Topcoat
Product Type
Professional Use
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Mathys Pegacryl Satin

This product is temporarily unavailable; in the meantime, our technical team recommend Zinsser Allcoat Exterior Satin Water Based as a great alternative -  **Please Note: This alternative is not recommended for use over Rust-Oleum Mathys Noxyde** Please note: it is important to check that any alternative product is suitable for your...

In stock

Rust-Oleum Mathys Paracem Satin Matt

This product is temporarily unavailable; in the meantime, our technical team recommend Zinsser Allcoat Exterior Matt Water Based as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt...

In stock

Rust-Oleum 7500 Alkythane

Rust-Oleum 7500 Alkythane is a single pack high performance, anti-corrosion topcoat for metal. Ideal for low temperatures (as low as 5°C) it offers the same protection in less layers than other alkyd-systems. Easy to apply, excellent flow and aspect Extra durable because of polyurethane addition Available in 4,400+ colours, inc. RAL, RAL...

Price £99.77
In Stock and Available for Delivery

Rust-Oleum Mathys Noxyde Fleece

We no longer stock this product, but can recommend Rust-Oleum Mathys Noxyde Tape as a great alternative.

In stock

Rust-Oleum Mathys Noxyde

We no longer stock this product in 5KG sizes, but have Rust-Oleum Mathys Noxyde - 20KG in stock, ready for immediate dispatch!

In stock

Rust-Oleum Mathys Metal Cladding Topcoat

Rust-Oleum Mathys Metal Cladding Topcoat is a long lasting water based, semi-gloss acrylic paint specially designed for use as a finish on exterior metal cladding that has high filling and hiding power and features excellent flow out with high durability and colour and gloss stability. Available in 4,400+ colours, inc. RAL, RAL Design, BS,...

Price £140.95
In Stock and Available for Delivery

General Painting Application Kit

General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

Price £8.02
In Stock and Available for Delivery

Rust-Oleum Mathys Noxyde Tape

Rust-Oleum Mathys Noxyde Tape is a self-adhesive tape made of a butyl rubber compound protected by a Fleece in Polypropylene used for reinforcement of overlaps of metal cladding roof and wall panels in combination with the Noxyde coating system.  Easy to apply Excellent adhesive properties, even at low temperatures Excellent heat...

Price £39.47
In Stock and Available for Delivery

Rust-Oleum Mathys Metal Cladding Topcoat - Anthracite Grey

Anthracite Grey (RAL 7016) long lasting water based, semi-gloss acrylic paint for exterior metal cladding - New formula with improved 10+ life expectancy - with high filling and hiding power, features excellent flow out with high durability and colour and gloss stability. Looking for a lighter or darker grey? Also available in 4,100+...

Price £140.95
In Stock and Available for Delivery

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

Price £17.22
In Stock and Available for Delivery