Ultimate water-based corrosion protection, rust prevention, and waterproofing on iron, steel, special alloys, galvanised and metallised iron and steel, aluminium, copper, zinc, lead, etc.
Single pack water-based elastomeric coating based on a silane modified acrylic binder with superior adhesion and corrosion protection. The product contains anti-corrosion pigments and is lead, chromate and zinc free.
| Technical Information | |
|---|---|
| Density (g/cm³): | 1,2 - 1,3 |
| Gloss Level: | Satin |
| Gloss level at 60º: | 24% |
| Solids Content in weight: | 66% |
| Solids content in volume: | 46% |
| Salt Spray Resistance: | 1.248h salt spray resistance ISO 9227:2017 |
| Dry Times By 20ºC/RV 50% | |
|---|---|
| Touch dry: | 1hr and 20 minutes |
| Dry to handle: | 2 hours and 45 minutes |
| Dry to recoat: | 24 hours |
| Fully cured: | 2 weeks |
Recommended Wet Film Thickness
Recommended Dry Film Thickness
Theoretical Consumption
Total consumption for optimal rust preventive protection 1000 g/m² (in minimum 2 coats) = 350 µm dry film thickness.
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning (max. 200 Bars) in combination with appropriate detergents.
The substrate has to be dust free and made rust free by means of sandblasting (Sa2), manual cleaning (St2) or high pressure water jetting (min. 600 Bars). After jetting, the substrate has to be dust free.
On new galvanised surfaces, new zinc, aluminium, stainless steel, apply first a coat of Pegalink or PVDF Primer.
On ferrous substrates, apply Noxyde Plus in red or grey as the first coat. In all instances apply contrasting Noxyde Plus colours for subsequent layers.
Direction for Use
To ensure homogeneity, coating materials should be thoroughly stirred mechanically prior to use.
Application Conditions
Temperature of air, substrate and coating material between 8 and 35°C. Air humidity max. 80% R.H.
The substrate temperature must be at least 5°C above dew point.
Application and Thinning
Brush:Undiluted as a rust preventive paint. Diluted with up to 25% volume water as an adhesion primer (consumption about 120 g/m² / max. 100 µm wet film thickness / 20 µm dry film thickness).
Roller:
Undiluted as a rust preventive paint. Diluted with up to 25% volume water as an adhesion primer (consumption about 120 g/m² - max. 100 µm wet film thickness - 20 dry film thickness).
Airless Spray
Undiluted. Nozzle: 15 - 19 / Pressure: min. 170 bars. Nozzle and pressure can vary depending on the type of substrate, equipment and the experience of the applicator. Put a thin layer of water on top of the paint to prevent skinning.
Cleaning of Equipment/Spills:
Water.
When used for interior works, provide for adequate ventilation. during work stoppage, fully immerse brush or nozzle in water. Product is recoatable after 24 hours with itself.
Compatible topcoats:
Do not apply outside if rain is expected within 24 hours.
Max. 500 g/m²/coat - 400 µm WFT - 184 µm DFT
| Safety Data | |
|---|---|
| VOC level: | 45g/l |
| VOC readymix: | 45g/l |
| VOC category: | A/i |
| VOC limit: | 140g/l |
| Remarks regarding safety: | Consult Safety Data Sheet and Safety Information printed on the can. |
Minimum of 4 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5 and 35°C.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Kenneth on 2024-04-11 16:09:43 | Question: i have a quistion about the Noxyde + is there any availible data about what temperatur it can withstand incase of expousere to fire og high heat ? is is fireretardent ? is it tested for different Ph values ? |
Answer from Rawlins’ Technical Team: Thank you for your enquiry. Please email [email protected] with more details of your requirements to enable us to assist further. | |
Rust-Oleum Mathys Noxyde Plus is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
We no longer stock this product, but can recommend Zinsser Allcoat Exterior Satin Water Based as a great alternative - **Please Note: This alternative is not recommended for use over Rust-Oleum Mathys Noxyde** Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in...
We no longer stock this product, but can recommend Zinsser Allcoat Exterior Matt Water Based as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical...
Rust-Oleum 7500 Alkythane is a single pack high performance, anti-corrosion topcoat for metal. Ideal for low temperatures (as low as 5°C) it offers the same protection in less layers than other alkyd-systems.Easy to apply, excellent flow and aspect Extra durable because of polyurethane addition Available in 4,400+ colours, inc. RAL, RAL...
£111.26 (incl. VAT)
£92.72 (ex. VAT)
We no longer stock this product, but can recommend Rust-Oleum Mathys Noxyde Tape as a great alternative.
Rust-Oleum Mathys Metal Cladding Topcoat is a long lasting water based, semi-gloss acrylic paint specially designed for use as a finish on exterior metal cladding that has high filling and hiding power and features excellent flow out with high durability and colour and gloss stability.Available in 4,400+ colours, inc. RAL, RAL Design, BS,...
£168.11 (incl. VAT)
£140.09 (ex. VAT)
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
£12.04 (incl. VAT)
£10.03 (ex. VAT)
A self-adhesive tape made of a butyl rubber compound protected by a Fleece in Polypropylene used for reinforcement of overlaps of metal cladding roof and wall panels in combination with the Noxyde coating system. Easy to apply Excellent adhesive properties, even at low temperatures Excellent heat stability High plasticity and...
£47.36 (incl. VAT)
£39.47 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)
