- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
We no longer stock this product; we have some recommended alternatives as listed below but due to the specialist nature of these coatings, please contact our technical team prior to purchase/use on 0113 2455450 (option 2) or send a message to [email protected] to confirm suitability for your project.
Jotun Baltoflake Ecolife is a one component styrene free glass flake reinforced unsaturated polyester coating. It is an ultra high build, extremely abrasion resistant and fast curing barrier coating that can be used as primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel, aluminium and approved primers. It can be applied down to +5°C surface temperature.
Jotun Baltoflake Ecolife is recommended for areas subject to extreme mechanical wear and harsh exposure conditions. Ideal for offshore environments, including splash zones, jetties, piles, tidal zones, decks, battery rooms, power stations, exterior of buried tanks, concrete bunds, refineries, bridges, mining equipment and general structural steel where future maintenance is challenging.
Approvals and Certificates
- Pre-qualification testing in acordance with NORSOK M-501, Rev. 3/4, System 7, suitable for splash zone.
Additional certificates and approvals may be available on request.
Features & Benefits
- Superior lifetime
- Extreme mechanical strength
- Fast cure and low temperature cure
- Styrene free
Fast cure
Baltoflake Ecolife cures so fast that you can walk on it only three hours after application. Perfect for painting in tidal zones where curing time is crucial.
Few coats
Spray up to 1500 microns in a single coat on a vertical steel surface without sagging.
Superior protection
Baltoflake Ecolife gives immense strength and protection against water, chemicals, solvents, abrasion or mechanical attack - outperforming traditional protection such as metallizing and epoxy coatings.
NORSOK pre-qualification
Baltoflake is pre-qualified in several NORSOK coating systems (System No. 1 and 7).
IMPORTANT: Jotun additives MUST be bought with this product to ensure drying and correct use. Please refer to the product Technical Data Sheet for information on which additives and how much of each are required. If in doubt, please contact our Technical Department on 0113 2455450.
Associated Additives
Data sheet
- For Use On
- Steel, Aluminium
- Application Method
- Brush, Spray
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- 16L
- Parts
- 16L
- Application
- Brush, Spray
- Coverage
- 0.6 to 1.6m²/l
- Touch Dry
- 2 hours
- UN Number
- UN1263
- Brand
- Jotun
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun Baltoflake Ecolife is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT