An aluminium-filled epoxy for steel and concrete that has excellent resistance to water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Top Features Aluminium flakes provide exceptional barrier...
Jotun Marathon 500
A surface tolerant from Jotun that is a high build epoxy coating suitable for environments with very high corrosivity, such as areas in the splash or tidal zones.
Jotun Marathon 500 is a two component polyamine cured epoxy coating. It's a surface tolerant, high solids, high build product that will continue to cure even when immersed in water.
Jotun Marathon 500 is a two component polyamine cured epoxy coating. It's a surface tolerant, high solids, high build product that will continue to cure even when immersed in water. Jotun Marathon 500 has high abrasion resistance and is suitable for environments with very high corrosivity, such as areas in the splash or tidal zones. It can be used as primer, mid-coat, finish coat or as single coat system in atmospheric and immersed environments. Ideal for properly prepared carbon steel substrates.
Jotun Marathon 500 is suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed.
Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially suited in areas where high mechanical strength is required, such as splash or tidal zones. Compatible with cathodic protection systems.
Approvals and certificates
- NORSOK M-501, system 7A (NORNER Report No SL 13363)
Additional certificates and approvals may be available on request.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 2.8m² per litre
- Touch Dry
- 4 hours
- Brush, Roller, Spray
Be the first to ask a question about this product!
A high solids corrosion resistant primer or intermediate coat on concrete, steel and (in)organic zinc primers. Top Features Excellent corrosion protection. Excellent film build and edge protection. VOC compliant to current AIM regulations.
Jotun Jotamastic 90 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. This Jotun product is tintable in a wide range of colours and is specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in...
A higher solids, better coverage and lower VOC content product than the standard 9100 Epoxy. Two-pack, glossy epoxy coating for metal, walls and floors. The most efficient epoxy system providing a very hard coating with high layer thickness for lasting results even with a single coat application.
A high build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates. Top Features Outstanding performance properties Suitable for application direct to inorganic zincs Application by spray, brush or roller
Jotun Jotamastic 90 Alu B15 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids, high build product. It is an aluminium pigmented product specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments...
Nu-Steel SP Anti Corrosive Primer/Undercoat is a high performance phosphate primer that is perfect for external metal structures that are exposed to the elements. Advantages High performance primer and undercoat. First class adhesion. 8-10m²/Litre average. 12-month shelf life.
Coo-Var Hammercote Smooth Finish is a fast drying coating giving a smooth gloss finish to metallic objects. ADVANTAGES Durable Full hardness reached after several days Interior/Exterior use Heat resistant up to 150°C Very fast drying Rust resistant Apply direct to metal or primer
A highly cross-linked, glass-flake filled polymer that offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures. Suitable for insulated or uninsulated pipes, stacks and equipment operating up to 450°F (232°C). Top Features Temperature resistance up to 232°C Excellent resistance to thermal shock...
A solvent-less, high gloss, smooth epoxy coating for the lining of gas transmission pipelines. It’s hard, smooth surface aids in the flow of gas by reducing turbulence while protecting the interior surfaces from corrosion. Tested in accordance with API RP 5L2 for gas transmission pipelines. Top Features Improves flow efficiency in gas...
A high build, glossy finish that has outstanding weathering resistance and colour retention. Suitable for application over a number of Carboline primers and intermediates. Top Features Outstanding performance propertie Suitable for application direct to inorganic zincs Application by spray, brush or roller
International Intertuf 16 is a one component, high build cold applied bituminous coating for use as an economical coating ideally suited for the protection of interior steel surfaces in enclosed areas such as tanks for storage of sea water, immersed piping and structural steelwork.
Jotun Inhibitor 53 is a specially developed additive for Jotun Baltoflake Ecolife, Jotun Chemflake Special and Jotun Chemflake CV products - refer to each product data sheet for further information.
Sherwin-Williams Dura-Plate 301S is an anticorrosive coating for long service life steel protection, normally used as an intermediate or topcoat as part of a 301 based coating system when very high edge retentive is required. It can be used for both immersion and above the waterline service in marine, offshore, construction and industrial applications.
A high-solids, zinc-filled epoxy primer for corrosion protection of structural steel in highly corrosive environments including offshore, marine and industrial. Top Features Protects steel galvanically Outstanding application properties Tough and abrasion resistant film