Jotun Penguard Pro is a two component amine cured epoxy coating that is a surface tolerant, fast drying, high solids, high build product specially designed as a universal, all round, all year, new construction coating where fast dry to handle times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel, aluminium, galvanised steel and thermally sprayed zinc substrates. It can be applied at sub zero surface temperatures.

Jotun Penguard Pro is suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings and mining equipment. Specially designed as a universal product in coating systems where extended durability is required. The product provides great flexibility in choice of dry film thickness range as well as area of use and application temperatures.

Approvals and certificates

• Pre-qualification testing in acordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120°C.

Additional certificates and approvals may be available on request.

Features & Benefits

• A universal product in coating systems where extended durability is required
• Provides great flexibility in choice of dry film thickness - 100 to 500 microns
• All year around - can be applied at sub-zero surface temperature
• Fast dry to recoat
• Fast dry to handle
• Designed for protection in severe corrosive environments

Multi-purpose / universal coating reduces the number of coatings needed

• In atmospheric and immersed conditions
• Wide dry film thickness range
• 100 to 500 microns
• All surfaces – steel, galvanised and aluminium
• Blast cleaning to min. Sa 2½ (ISO 8501-1:2007)
• For previously coated surfaces UHPWJ to WJ2 (NACE No.5/SSPC-SP 12
• Power tool cleaning to min. St 2 (ISO 8501-1:2007) may be acceptable, subject to exposure
• Certified in systems for NORSOK system 1 and 7
• Certified for application in water ballast tanks at newbuilding stage in accordance with PSPC (IMO Res. MSC 82/W)

All season

• For application down to -5°C 
• Fast dry-to-recoat and fast-to-handle

High solids

• Good spreading rate
• Low VOC

Ultra High Pressure Water Jetting has become an effective surface pre-treatment method in new building and new construction situations. Penguard Pro is based on a new in-house developed technology giving the coating superior adhesion, also to UHPJ surfaces. Penetration properties of Jotun Penguard Pro are far better than traditional new construction coatings.