International Interbond 1202UPC (Universal Pipe Coating) is the universal pipe coating that reduces specification complexity and project costs. Suitable for protecting above-ground piping and accessories in new construction process plant operating at temperatures between -196ºC (-321ºF) to +650ºC (1202ºF).
Jotun Penguard Pro Alu
A surface tolerant, aluminium pigmented, fast drying, high solids, high build product specially designed as a universal, all round, all year, new construction coating where fast dry to handle times are required.
Jotun Penguard Pro Alu is a two component amine cured epoxy coating that is a surface tolerant, aluminium pigmented, fast drying, high solids, high build product. Specially designed as a universal, all round, all year, new construction coating where fast dry to handle times are required. It can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel, aluminium, galvanised steel and thermally sprayed zinc substrates. It can be applied at sub zero surface temperatures.
Jotun Penguard Pro Alu is suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings and mining equipment. Specially designed as a universal product in coating systems where extended durabilty is required. The product provides great flexibilty in choice of dry film thickness range as well as area of use and application temperatures.
- Typical Coverage (per coat)
- 3m² per litre
- Touch Dry
- 3 hours
- Brush, Roller, Spray
Be the first to ask a question about this product!
Sika Poxitar F is an epoxy-anthracene oil-combination heavy duty coating for steel and concrete. Sika Poxitar F is tough hard, heavy duty, abrasion and impact resistant and has excellent resistance to water and chemicals.
Jotun Inhibitor 53 is a specially developed additive for Jotun Baltoflake Ecolife, Jotun Chemflake Special and Jotun Chemflake CV products - refer to each product data sheet for further information.
Jotun Jotamastic 90 Alu B15 WG is a 'Wintergrade' version of Jotun Jotamastic 90 Alu B15 to aid application in lower temperatures and to provide faster drying and curing times. It is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids, high build product.
Coo-Var Hammercote Smooth Finish is a fast drying coating giving a smooth gloss finish to metallic objects. ADVANTAGES Durable Full hardness reached after several days Interior/Exterior use Heat resistant up to 150°C Very fast drying Rust resistant Apply direct to metal or primer
Jotun Hardtop Flexi is a high solids (64% volume) polyurethane topcoat with excellent wetting and adhesion properties. Hardtop Flexi has a remarkable ability to resist impact and will maintain initial gloss level over extended periods. This is one of the few products that contain anti-corrosive pigments for the best direct to metal performance.
Jotun Jotamastic Smart Pack HB is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product designed for application with brush and roller. 1:1 mixing ratio for easy use and reduced wastage. Specially designed for areas where optimum surface preparation is not possible, provides long lasting protection in...
Cromadex 683 Two Pack Polyurethane Eggshell Primer Finish is a two pack eggshell primer finish; the high quality resin and curing agent help to produce excellent long term colour stability. The product contains zinc phosphate giving added corrosion resistance for greater durability. Cromadex 683 is available in a wide range of colours, including BS, RAL,...
Jotun Jotacote Universal N10 is specially designed as a universal, all round, all year, new building coating where fast dry to handle times are required. Jotun Jotacote Universal N10 can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments and is replacing the current Jotacote Universal product.
International Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings.
Jotun Jotacote Universal is a two component amine cured pure epoxy coating that is a fast drying, abrasion resistant, high solids and high build. Designed as an universal, all round, all year, new building coating where fast dry to handle is required. It can be used as primer, mid coat, finish coat or as a single coat system in atmospheric and immersed...
Everbuild 901 Black Bitumen Paint is a solvent based, full bodied black bitumen paint, When dry, the product forms an odourless and taint free bitumen film suitable for the protection of metals, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood against water attack.
Jotun Jotamastic 87 GF is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids, high build product. Reinforced with glass flakes for improved abrasion and scratch resistance. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments...
International Intercryl 525 is designed for use as a primer/finish for structural steel, in a wide variety of general industrial environments of light to moderate corrosivity, including on bridges, commercial buildings, infrastructure and manufacturing plants. It exhibits excellent colour and gloss retention.