Alternatively you can email our sales & support team on [email protected]
Jotun Aluminium Paint H.R.
0BLALUFVA
Jotun Aluminium Paint H.R. is a one component styrene modified oxidatively drying alkyd coating that is heat resistant up to 250°C. It can be used as an exterior aluminium finish usually within an alkyd system. Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel and aluminium substrates.
Jotun Aluminium Paint H.R. is a one component styrene modified oxidatively drying alkyd coating that is heat resistant up to 250°C. It can be used as an exterior aluminium finish usually within an alkyd system. Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel and aluminium substrates.
Jotun Aluminium Paint H.R. is ideal for exhaust pipes, process piping and engine parts.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Question: is this product half hour or hour fire rated?
Answer:
Neither, it is a heat resistant paint that can withstand temperatures up to 250°C. If you are looking for a fire retardant paint that provides 30 or 60 minutes fire resistance then you would need to view products in our Fire Retardant Paint category.
Jotun Jotatemp 540 Zinc is a two component glass flake reinforced inorganic zinc ethyl silicate coating. It conforms to the compositional requirements of SSPC paint 20, level 3, ISO 12944-5 and AS/NZS 3750.15. It provides corrosion protection as a single coat and can be used under insulation if overcoated with a high temperature coating designed to offer...
A heat-resistant up to 350°C, super-fast zinc rich primer containing pure zinc as pigment to provide excellent protection against corrosion. Should be used on new, bare steel or galvanised steel surfaces as a primer or as a single coat finish in light industrial exposures, corrosive environments and high humidity areas.
Blackfriar Quick Drying Radiator Paint can withstand temperatures of up to 150°C/300°F, and is a white finish paint that is specially formulated for interior use on radiators, pipework and storage heaters. It is hard wearing, and does not yellow with age.
Cromadex 475 Heat Resistant (up to 250°C) Primer Finish is a black heat resistant primer finish suitable for items reaching temperatures of up to 250°C. The product has a fast touch dry time helping to improve productivity. It has excellent covering power helping to reduce application costs.
International Intertherm 891 is a one component, general purpose heat resistant paint for use as a heat resistant coating for general site use or as an industrial maintenance coating on both ambient and high temperature steelwork up to 315ºC (600ºF) where an economical aluminium finish is required.
International Intertherm 751 CSA is a high performance coating that is applied using standard application equipment and cures effectively at ambient temperatures. Capable of providing corrosion protection to steel in both atmospheric service and under thermal insulation operating in thermal cyclical conditions between -196°C (-321°F) and 400ºC...
A high density cementitious fireproofing designed for the fire protection of exterior and interior structural steel. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete.
Top Features
Cost effective fireproofing solution
Outstanding...
International Intertherm 50 is a single component, high temperature coating, suitable for temperatures up to 540°C (1004°F) for the protection of steel from corrosion on areas including flare stacks, chimneys, exhausts, vents and pipework, etc.
A heat-resistant up to 150°C, fast drying zinc/aluminium coating that contains pure zinc and aluminium as pigment to quickly and easily renew the gloss on zinc surfaces. Intended to be applied on small areas or for touch-up. The product should be used as a single coat in light industrial exposures and corrosive environments for galvanised...
Jotun Solvalitt Zinc is a one component physically drying zinc rich silicone coating that is heat resistant up to 400°C. It can be used as a primer in atmospheric environments and suitable for properly prepared carbon steel substrates.
Jotun Resist 86 is a two component moisture cured inorganic zinc ethyl silicate coating that is a fast curing, very high zinc dust containing product.
Specially designed by Jotun as a primer in coating systems where extended durability is required. It provides a solid foundation for the optimal performing coating system in the toughest exposures.
Jotun Solvalitt is designed as a white or black heat resistant coating suitable for insulated and non insulated surfaces. It is a one component physically drying silicone acrylic coating that is heat resistant up to 600°C. It can be used as a primer, mid coat or finish coat in atmospheric environments.
Coo-Var Heat Resistant Satin Black Enamel is a high quality, black paint for use at temperatures up to 600°C indirect heat.
ADVANTAGES
Great heat resistance
Apply direct
Fast drying time
Satin finish
Great for domestic use
Low sheen
Cromadex Monozinc One Pack Zinc-Rich Primer is a one pack, zinc-rich primer. Based on epoxy ester resin it is heat resistant to 400°C. It provides galvanic protection to new steelwork and can also be used to repair two pack zinc-rich primers. Monozinc contains more than 90% Zinc in the dry film.
A high density cementitious fireproofing designed for the fire protection of exterior and interior structural steel. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete.
Top Features
Cost effective, high yield
Exceptional durability and...
Sherwin-Williams Heat-Flex M505 is an air drying silicone resin based heat resistant matt finish coating. It is used for application on to steel surfaces previously coated with Dox-Anode D5V2 or zinc or aluminium metal spray, where heat resistance is required.
chris on 27/04/2016
