Jotun Resist 86 is a two component moisture cured inorganic zinc ethyl silicate coating that is a fast curing, very high zinc dust containing product. Specially designed by Jotun as a primer in coating systems where extended durability is required. It provides a solid foundation for the optimal performing coating system in the toughest...
Sika Tramex Moisture Meter
Sika Tramex Moisture Meter is a handheld electronic moisture meter used for testing moisture conditions in concrete and other floor slabs and screeds.
Versatile, precise and easy to use, the Sika Tramex Moisture Meter allows the user to make multiple tests over a large area in the shortest possible time.
Features and Benefits
- Designed, developed and calibrated specifically for concrete
- Instant readings, measures up to 6% moisture content
- Non-destructive operation per ASTM F2659 (no drilling)
- Large easy to read analogue display
- "Hold" button freezes reading on analogue meter
- Battery operated (supplied)
- Strong robust design
Sika Tramex Moisture Meter is a handheld electronic moisture meter used for testing moisture conditions in concrete and other floor slabs and screeds. Versatile, precise and easy to use, the Sika Tramex Moisture Meter allows the user to make multiple tests over a large area in the shortest possible time.
Features & Benefits
- Designed, developed and calibrated specifically for concrete.
- Instant readings, measures up to 6% moisture content.
- Non-destructive operation per ASTM F2659 (No drilling).
- Large easy to read analogue display.
- "Hold" button freezes reading on analogue meter.
- Battery operated (Supplied).
- Strong robust design.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Teamac High Temperature Aluminium Paint. A high quality enamel for use at temperatures up to 450°C indirect heat. Advantages Ideal for use in areas prone to heat Can be used as a single coat for fire surrounds, radiators, hot pipes and more Click to jump down to Technical Data Coverage Calculator
Rust-Oleum Hard Hat 2180 Galva Expresse is a heat-resistant up to 350°C, super-fast zinc rich primer containing pure zinc as pigment to provide excellent protection against corrosion. Should be used on new, bare steel or galvanised steel surfaces as a primer or as a single coat finish in light industrial exposures, corrosive environments and...
Jotatemp 250 is a two component glass flake reinforced epoxy composite coating. It is heat resistant up to 250°C (482°F) and can be applied on hot substrates up to 150°C (300°F). Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates.
International Intertherm 50 is a single component, high temperature coating, suitable for temperatures up to 540°C (1004°F) for the protection of steel from corrosion on areas including flare stacks, chimneys, exhausts, vents and pipework, etc.
Carboline Carbotherm 3300 is a ceramic blend insulative composite coating formulated in a high temperature resistant acrylic binder. It is ideally suited as a protective heat barrier to shield personnel from hot surfaces. Top Features Excellent thin-film insulation Superior coverage during application Protects personnel from hot surfaces...
International Intertherm 751 CSA is a high performance coating that is applied using standard application equipment and cures effectively at ambient temperatures. Capable of providing corrosion protection to steel in both atmospheric service and under thermal insulation operating in thermal cyclical conditions between -196°C (-321°F) and 400ºC...
SigmaCover 400/Amerlock 400, a two-component, high solids, high performance self priming universal epoxy coating for steel and concrete, galvanising, stainless steel and non-ferrous metals, with low VOC. The coating has good adhesion on existing coats, compatible with prepared, damp surfaces, and has many qualifications including Nuclear...
Jotun Aluminium Paint H.R. is a one component styrene modified oxidatively drying alkyd coating that is heat resistant up to 250°C. It can be used as an exterior aluminium finish usually within an alkyd system. Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel and aluminium substrates.
Rust-Oleum Hard Hat 2120 Galva Plus is a heat-resistant up to 150°C, fast drying zinc/aluminium coating that contains pure zinc and aluminium as pigment to quickly and easily renew the gloss on zinc surfaces. Intended to be applied on small areas or for touch-up. The product should be used as a single coat in light industrial exposures and...
International Intertherm 875 is a single component, intermediate temperature finish for use in a wide range of industrial environments as a heat resistant finish coat for application over properly primed steelwork in both new construction and as a maintenance coating at temperatures up to 260°C (500°F).
A high density cementitious fireproofing designed for the fire protection of exterior and interior structural steel. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Top Features Cost effective, high yield Exceptional durability and...
PPG SigmaTherm 230 is a two-component, high-build, heat-resistant epoxy phenol novolac coating that provides a corrosion resistant barrier on carbon steel and stainless steel under thermal insulation. Suitable as heat resistant system under insulation up to 230°C (450°F) as well as for use in cryogenic conditions. Top Features Meets CS-1,...
Rust-Oleum 4200 is a heat resistant aluminium finish topcoat providing heat resistance up to 425°C which should be applied over surfaces primed with Rust-Oleum 4200 Heat Resistant Primer. Withstands continuous exposure to temperatures of up to 425°C Long-term gloss retention Nice aluminum finish Single pack, easy to apply One coat is...
Sherwin-Williams Heat-Flex Hi-Temp 1200 is the next generation single- component inert multipolymeric matrix coating that outperforms alternatives in combating corrosion under insulation (CUI) and in high heat applications.
HMG VHT Stoving Enamel. A Silicone Modified Polyester Stoving Enamel with outstanding resistance to yellowing and film breakdown at high temperatures. For use on Radiator finishes, exhaust enamels, refridgerators, washing machines and water heaters. Resistant to most household chemicals including soda solution, acetic acid, strong...