International Intertherm 50
International Intertherm 50 is a single component, high temperature coating, suitable for temperatures up to 540°C (1004°F) for the protection of steel from corrosion on areas including flare stacks, chimneys, exhausts, vents and pipework, etc.
International Intertherm 50 is a single component, high temperature coating, based on a moisture curing silicone binder. The moisture curing crosslinking mechanism allows multiple coats to be applied without heat curing. Suitable for temperatures up to 540°C (1004°F).
- International Intertherm 50 is for the protection of steel from corrosion on areas including flare stacks, chimneys, exhausts, vents and pipework, at temperatures up to 540°C (1004°F).
- Where maximum corrosion protection is required, application should be over a zinc silicate primer (e.g. Interzinc 22).
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Water / Solvent Based
- For Use On
- Application Method
- Brush, Roller, Spray
- Standard / Ready Mixed
- Single, Two or Three Pack
- Product Certifications
- BS5493 (1977) : CP7, Shell Specification DEP 40.48.00.30
- Pack Size
- Touch Dry
- 30 mins
- UN Number
Be the first to ask a question about this product!