International Intertherm 228HS is a highly crosslinked, two component, high build epoxy phenolic coating suitable for exposure in a wide range of highly corrosive environments, including insulated and uninsulated carbon and stainless steel for use on the exterior of pipework, process vessels etc., operating at temperatures up to 230°C (446°F).
International Intertherm 890
International Intertherm 890 is a two component, oleoresinous primer, pigmented with metallic zinc dust and graphite for use as an anti-corrosive industrial maintenance primer for steel at temperatures between 150°C (302°F) and 450°C (842°F).
International Intertherm 890 is a two component, oleoresinous primer, pigmented with metallic zinc dust and graphite.
- As an anti-corrosive industrial maintenance primer for steel at temperatures between 150°C (302°F) and 450°C (842°F).
- International Intertherm 890 is sutiable for use as an industrial maintenance coating on correctly prepared abrasive blast cleaned, hand and power tool cleaned steel on all high temperature structures such as flare stacks, exhausts, chimneys and pipework.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 11.4m² per litre
- Touch Dry
- 12 Hours
Be the first to ask a question about this product!
Blackfriar Quick Drying Metal Paint has been specially formulated to provide a tough, long-lasting, high gloss finish. It is heat resistant up to 150ºC/300ºF, and available in white, black, grey, silver, yellow, green, blue, and red colour finishes.
Jotun Resist 86 is a two component moisture cured inorganic zinc ethyl silicate coating that is a fast curing, very high zinc dust containing product. Specially designed by Jotun as a primer in coating systems where extended durability is required. It provides a solid foundation for the optimal performing coating system in the toughest...
A high density cementitious fireproofing designed for the fire protection of exterior and interior structural steel. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Top Features Over 39 years of proven performance Exceptional...
International Intertherm 751 CSA is a high performance coating that is applied using standard application equipment and cures effectively at ambient temperatures. Capable of providing corrosion protection to steel in both atmospheric service and under thermal insulation operating in thermal cyclical conditions between -196°C (-321°F) and 400ºC...
Jotun Solvalitt Alu is a one component physically drying silicone acrylic coating that is an aluminium pigmented product leaving a metallic silver finish. It is heat resistant up to 600°C and can be used as a primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and...
Coo-Var Heat Resistant Satin Black Enamel is a high quality, black paint for use at temperatures up to 600°C indirect heat. ADVANTAGES Great heat resistance Apply direct Fast drying time Satin finish Great for domestic use Low sheen
Cromadex Monozinc One Pack Zinc-Rich Primer is a one pack, zinc-rich primer. Based on epoxy ester resin it is heat resistant to 400°C. It provides galvanic protection to new steelwork and can also be used to repair two pack zinc-rich primers. Monozinc contains more than 90% Zinc in the dry film.
Jotun Epoxy HR is a two component polyamine cured novolac epoxy coating that is heat resistant up to 200°C and can be applied on hot substrates up to 150°C. It can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates.
PPG SigmaTherm 540 is a one-component, heat-resistant, moisture-curing silicone aluminum coating for protecting steel surfaces in internal and external applications. Complies with NACE SP0198 for austenitic stainless steels and carbon steels under thermal insulation. Top Features Dry heat resistance up to 600°C (1112°F) No heat cure...
Cromadex 495 High Temperature Resistant (up to 550°C) Primer Finish is a black, high temperature resistant primer finish suitable for items reaching temperatures of up to 550°C. The product has a fast touch dry time helping to improve productivity. It has excellent covering power helping to reduce application costs.
Jotatemp 250 is a two component glass flake reinforced epoxy composite coating. It is heat resistant up to 250°C (482°F) and can be applied on hot substrates up to 150°C (300°F). Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates.
Rust-Oleum Heat Resistant Paint 750°C is for use on new, bright or shot-blasted steel or well pre-treated coated surfaces, intended to provide heat resistancce in touch-up and maintenance applications. ADVANTAGES For continuous temperatures up to 650°C and peak temperatures up to 750°C For bare metal or slightly rusted surfaces Also...
Sherwin-Williams Heat-Flex Hi-Temp 1200 is the next generation single- component inert multipolymeric matrix coating that outperforms alternatives in combating corrosion under insulation (CUI) and in high heat applications.
Rust-Oleum 4200 is a heat resistant aluminium finish topcoat providing heat resistance up to 425°C which should be applied over surfaces primed with Rust-Oleum 4200 Heat Resistant Primer.
Jotun Solvalitt Midtherm Alu is an aluminium pigmented version of the standard Solvalitt Midtherm producing a metallic silver finish. A one component physically drying silcione acrylic coating that is heat resistant up to 260°C. It can be used as a primer, mid coat or finish coat in atmospheric environments.