Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Jotun Jotatemp 540 Zinc is a two component glass flake reinforced inorganic zinc ethyl silicate coating. It conforms to the compositional requirements of SSPC paint 20, level 3, ISO 12944-5 and AS/NZS 3750.15. It provides corrosion protection as a single coat and can be used under insulation if overcoated with a high temperature coating designed to offer protection against CUI.
Jotun Jotatemp 540 Zinc is a two component glass flake reinforced inorganic zinc ethyl silicate coating. It conforms to the compositional requirements of SSPC paint 20, level 3, ISO 12944-5 and AS/NZS 3750.15. It provides corrosion protection as a single coat and can be used under insulation if overcoated with a high temperature coating designed to offer protection against CUI. It is heat resistant up to 540 °C (1004 °F). Suitable for properly prepared carbon steel substrates only. This product complies with ASTM D520 type II zinc dust.
Typical Use
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Be the first to ask a question about this product!
Sherwin-Williams Heat-Flex M505 is an air drying silicone resin based heat resistant matt finish coating. It is used for application on to steel surfaces previously coated with Dox-Anode D5V2 or zinc or aluminium metal spray, where heat resistance is required. Coverage Calculator
Rust-Oleum 4200 Heat Resistant Primer (orange in colour) provides heat resistance up to 425°C dry heat on metal substrates, including application on boiler fronts, incinerators, stacks, breechings, kilns and similar surfaces subject to high temperatures and rust producing conditions. Also known as 4268 Heat Resistant Primer. Withstands...
Jotatemp 250 is a two component glass flake reinforced epoxy composite coating. It is heat resistant up to 250°C (482°F) and can be applied on hot substrates up to 150°C (300°F). Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and...
Carboline Carbotherm 551 is a unique insulative composite coating formulated in a high temperature resistant epoxy binder. Unlike acrylic-based insulative materials it has superior toughness, hardness, impact resistance, chemical resistance and permeation resistance. Top Features Excellent thin-film insulation Unique epoxy formula...
International Intertherm 181 is a two component, high temperature resistant topcoat based on inorganic silicate technology. Specifically designed for application over inorganic zinc primers, which provides a single specification to be used for the protection of all pipework from corrosion at continuous operating temperatures up to 400°C...
International Interplate 937 is a two pack, heat resistant zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C (1472°F)), with minimum production of zinc salts. Suitable for high speed welding and cutting with excellent resistance to damage caused by welding, gas cutting and fairing....
PPG SigmaTherm 540 is a one-component, heat-resistant, moisture-curing silicone aluminum coating for protecting steel surfaces in internal and external applications. Complies with NACE SP0198 for austenitic stainless steels and carbon steels under thermal insulation. Dry heat resistance up to 600°C (1112°F) No heat cure necessary between...
International Intertherm 891 is a one component, general purpose heat resistant paint for use as a heat resistant coating for general site use or as an industrial maintenance coating on both ambient and high temperature steelwork up to 315ºC (600ºF) where an economical aluminium finish is required. Coverage Calculator
Rust-Oleum Hard Hat 2180 Galva Expresse is a heat-resistant up to 350°C, super-fast zinc rich primer containing pure zinc as pigment to provide excellent protection against corrosion. Should be used on new, bare steel or galvanised steel surfaces as a primer or as a single coat finish in light industrial exposures, corrosive environments and...
PPG SigmaTherm 350 is a heat-resistant silicone/acrylic finish, featuring excellent resistance against weathering and a minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat. Heat-resistant up to 350°C (660°F) To be used for the internal and external protection of steel surfaces Widely compatible with...
HMG AR141 Matt Black is an air dying silicone based paint specifically formulated to enable the dried film to tolerate high temperatures up to 300ºC. The full physical properties are achieved after baking at temperatures above 220ºC (at this temperature the free silicones in the system auto cross link) At temperatures of up to 300ºC...
Tor GP/Heat Resisting Aluminium, a paint for use on interior and exterior steelwork, pipework, storage tanks, gantries etc, withstanding dry heat up to 200°C. Heat resistant paint A resin modified alkyd binder pigmented with aluminium flake and thinned for application with White Spirit Bright aluminium metallic finish Available in 3...
SigmaCover 400/Amerlock 400, a two-component, high solids, high performance self priming universal epoxy coating for steel and concrete, galvanising, stainless steel and non-ferrous metals, with low VOC. The coating has good adhesion on existing coats, compatible with prepared, damp surfaces, and has many qualifications including Nuclear...
Jotun Aluminium Paint H.R. is a one component styrene modified oxidatively drying alkyd coating that is heat resistant up to 250°C. It can be used as an exterior aluminium finish usually within an alkyd system. Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel and aluminium...
Cromadex 495 High Temperature Resistant (up to 550°C) Primer Finish is a black, high temperature resistant primer finish suitable for items reaching temperatures of up to 550°C. The product has a fast touch dry time helping to improve productivity. It has excellent covering power helping to reduce application costs.
Rust-Oleum Hard Hat 2120 Galva Plus is a heat-resistant up to 150°C, fast drying zinc/aluminium coating that contains pure zinc and aluminium as pigment to quickly and easily renew the gloss on zinc surfaces. Intended to be applied on small areas or for touch-up. The product should be used as a single coat in light industrial exposures and...
