Tor GP/Heat Resisting Aluminium

AK729

This product is temporarily unavailable; in the meantime, our technical team recommend Rust-Oleum Heat Resistant Paint 750°C as a great alternative - use discount code MAY10 at checkout to save 10%!

Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.

Tor GP/Heat Resisting Aluminium, a paint for use on interior and exterior steelwork, pipework, storage tanks, gantries etc, withstanding dry heat up to 200°C.

  • Heat resistant paint
  • A resin modified alkyd binder pigmented with aluminium flake and thinned for application with White Spirit
  • Bright aluminium metallic finish
  • Available in 3 sizes
  • Up to 12 square metres of coverage per litre
  • Application by sprayer, roller or brush
    • Thinning will not meet VOC regulations.
    • Use Tor TH10 to clean equipment
  • Touch dry in 4 hours - can be overcoated after 16 hours
  • Refer below for application and preparation details

Colour
Size
Finish
£14.49
VAT excluded

£17.39 Tax incl.
Quantity

Description

Tor GP/Heat Resisting Aluminium paint for interior and exterior steelwork, pipework, storage tanks, gantries etc, standing dry heat up to 200°C. The bright aluminium metallic finish is available in 3 sizes with up to 12 square metres of coverage per litre.



Features & Benefits


  • Heat resistant paint
  • Withstands dry heat up to 200°C
  • Aluminium metallic finish
  • For interior and exterior steelwork, pipework, storage tanks, gantries etc.
  • Available in 3 sizes
  • Good coverage up to 12 square metres per litre.
  • Apply by brush, roller (short pile) or air spray
  • Dry to the touch in 4 hours; hard dry after 16 hours



Product Information


A resin modified alkyd binder pigmented with aluminium flake and thinned for application with White Spirit. Heat resistant up to 200°C.

Product reference AK729
Volume solids 45%
Typical thickness 38 microns dft from 84 microns wet
Theoretical coverage 12 square metres per litre
Practical coverage Reduce theoretical coverage by up to 20%
VOC content EU limit value for this product (cat A/i): 500 g/l . This product contains max 500 g/l VOC



Surface Preparation


Steel:

Minimum cleaning must be to Swedish Standard ST2 for mechanical chipping, scraping and wire brushing.



Application Details


Mix ratio N/A
Method of application Brush, short pile roller or airless spray (0.015” tip and 2000 psi atomising pressure)
Thinner Thinning will not meet VOC regulations.
Cleaner Tor TH10
Pot Life N/A



Drying Times


Substrate Temperature Touch Dry Hard Dry Overcoating Interval
      Minimum Maximum
20°C 4 hours 16 hours 16 hours Unlimited

Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures



Storage and Handling


Store in a safe place out of the reach of children

Flash point

  • Above 32°C

Shelf life

  • 2 years in unopened containers



Limitations


Do not apply in condensation conditions ie. steel surface temperature within 2°C of the dew point.

Will stand dry heat up to 200°C only.

  1. Avoid skin and eye contact i.e. wear gloves, goggles, etc
  2. Ensure good ventilation, mechanical if necessary
  3. Store and use away from heat and flame
  4. Do not eat or smoke in the vicinity of work
  5. Wash hands before eating
  6. Refer to supply container for additional warning labels

Product Details
AK729

Data sheet

Manufacturer
Tor Coatings
Water / Solvent Based
Solvent
For Use On
Steel
Application Method
Brush, Roller, Spray
Sheen
Semi-Gloss
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
1L, 2.5L, 5L
Solvent
A resin modified alkyd binder pigmented with aluminium flake and thinned for application with White Spirit. Heat resistant up to 200 oC.
Mixing Ratio
-
Key Features
Bright aluminium metallic finish for use on interior and exterior steelwork, pipework, storage tanks, gantries etc.
Touch Dry (at 20°C)
4 hours
Dry to Handle (at 20°C)
-
Dry to Recoat (at 20°C)
16 hours
Fully Cured (at 20°C)
16 hours
Pot Life (at 20°C)
-
Coverage
12 square metres per litre
Recommended Thinner/Cleaner
Tor TH10 (for cleaning)
Unit Contents
-
Compatible Primers
-
Compatible Topcoats
-
Max. Application Temperature
-
Min. Application Temperature
-
Density
-
Solids by Volume
45%
Heat Resistance (up-to)
Withstands dry heat up to 200°C
VOC
This product contains max 500 g/l VOC
Shelf Life (from date of manufacture)
2 years in unopened containers
UN Number
UN1263
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Tor General Purpose Thinner

This product is temporarily unavailable; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. See our accessories page for more solvents and thinners. Tor General Purpose Thinner (TH10) - also known as Tor Tortread SP Thinners - is...

Price £17.28
In stock