Tikkurila Temal 600 HB is a high build silicone aluminium paint which resists dry heat up to +650°C. The paint is used in cases demanding heat-resistant products such as fireplace doors, flues, exhaust pipes, sauna stoves.
Can be applied by airless spray equipment.
Recommended for exteriors of steel structures exposed to high temperatures.
Tikkurila Temal 600 HB is a heat resistant silicone aluminium paint which resists dry heat up to +650°C. The paint is used in cases demanding heat-resistant products such as fireplace doors, flues, exhaust pipes, sauna stoves.
Resists dry heat up to +650°C. The paint is used in cases demanding heat-resistant products such as fireplace doors, flues, exhaust pipes, sauna stoves.
Can be applied by airless spray equipment.
Recommended for exteriors of steel structures exposed to high temperatures.
Technical Data
Technical Data
Tikkurila Temal 600 HB
Volume Solids:
34±2%
SG:
1.2±0.1 kg / l
Viscosity:
Kinematic (40°C): >20.5 mm²/s
Density:
1.16 g/cm³
Storage Conditions:
Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials. Keep container tightly closed. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Recommended storage temperature is +5°C ...+25°C
Flash Point:
25°C (xylene)
Coverage (for a flat substrate):
13.6 m²/l
Drying Times At 23°C
DFT 15µm
10°C
23°C
35°C
Dust Dry:
30 minutes
15 minutes
10 minutes
Touch Dry:
2 hours
1 hour
30 minutes
Recoatable:
3 hours
2 hours
1 hour
Final cure and hardness will be obtained by curing at +230 ºC, 1 h
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Recommended Film Thickness
Wet:
75µm
Dry:
25µm
Surface Preparation
Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)
Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.
Zinc silicate surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Application Conditions
All surfaces must be clean, dry and free from contamination.
The temperature of the ambient air, surface and paint should not fall below +10ºC during application and drying.
Relative humidity of the air should not exceed 80% during application and drying.
The surface temperature of steel should remain at least 3°C above the dew point.
Good ventilation and sufficient air movement is required in confined areas during application and drying.
Application
Stir the product carefully before use.
For airless spraying, the product is thinned approximately 0–10%. Recommended nozzle tip is 0.011"–0.013" and pressure 120–160 bar. Spray angle shall be chosen according to the shape of the object.
For conventional spraying, the product is thinned approximately 0–10%. Recommended nozzle tip is 1.4–1.8 mm and pressure 3–4 bar.
For brush application product should be thinned according to the circumstances.
The Volatile Organic Compounds amount is 565 g/litre of paint.
VOC content of the paint (thinned 10% by volume) is 595 g/l.
Health And Safety
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tikkurila Temal 600 HB is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tikkurila Temafloor 400 is a two-component solvent-free epoxy varnish. An excellent product for dust binding and priming of new and old concrete floors, especially where solventless and odourless products are needed. The lacquer can be used for patching when filled with sand.Used as a binder for Temafloor 4000 troweling screed and epoxy...
Tikkurila Temasil 90 is a two-component ethyl silicate zinc rich paint. Protective coating with an effect similar to that achieved with galvanizing.Can be used as a single coat or as a primer in protective coating systems. Excellent resistance to abrasion and weathering. Offers cathodic protection of steel. Can be used on steel...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...