Rust-Oleum 4200 Heat Resistant Primer
  • Rust-Oleum 4200 Heat Resistant Primer

Rust-Oleum 4200 Heat Resistant Primer

4268

Rust-Oleum 4200 Heat Resistant Primer (orange in colour) provides heat resistance up to 425°C dry heat on metal substrates, including application on boiler fronts, incinerators, stacks, breechings, kilns and similar surfaces subject to high temperatures and rust producing conditions. Also known as 4268 Heat Resistant Primer.

  • Withstands continuous exposure to temperatures of up to 425°C
  • Contains rust-inhibitive pigments
  • Single pack, easy to apply
  • Lead and chromate free
  • Economical coverage

Colour
Size
Finish
£117.07
VAT excluded

£140.48 Tax incl.
Quantity

Description

Rust-Oleum 4200 Heat Resistant Primer

Rust-Oleum 4200 Heat Resistant Primer provides heat resistance up to 425°C dry heat on metal substrates. It should be finished with Rust-Oleum 4200 Heat Resistant Topcoat.

Features & Benefits

  • Heat resistant paint
  • Withstands continuous exposure to temperatures of up to 425°C
  • Contains rust-inhibitive pigments
  • Single pack, easy to apply
  • Lead and chromate free
  • Economical coverage

Rust-Oleum 4200 Heat Resistant Primer is for application on boiler fronts, incinerators, stacks, breechings, kilns and similar surfaces subject to high temperatures and rust producing conditions. Should be used on new, bare steel or blasted steel surfaces.

Recommended use

Technical

  • Density: 1,38
  • Gloss Level: Matt
  • Corrosion Class: C3 average protection
  • Solids content in volume: 44,4 %
  • Heat Resistance: 425°C (continuous dry heat)

Drying time at 20°C/RH 50%

  • Touch dry: 30 minutes
  • Dry to handle: 2 hours
  • Dry to recoat: 24 hours
  • Fully cured: 24 hours after minimum service temperature is reached

Cleaning of equipment/spills

Maximum dry film thickness per coat: 60 µm dry, equals 175 µm wet. Heat up the coating slowly (max. 50°C/hr) until 150°C.

Shelf life

  • 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
4268

Data sheet

Application
Brush, Roller, Spray
Touch Dry (at 20°C)
30 Minutes
Dry to Handle (at 20°C)
2 Hours
Dry to Recoat (at 20°C)
24 Hours
Density
1,38
Solids by Volume
44,4 %
Heat Resistance (up-to)
425°C (continuous dry heat)
VOC
442 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Recommended Dry Film Thickness
45 µm
Recommended Wet Film Thickness
100 µm
UN Number
UN1263
Consumption
9,8 m²/l
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Justin Kent on 2019-04-24 08:56:08
Question: 

Does this paint prevent thermal conduction of metal? We currently have a metal plate that is reaching high temperatures in a sauna, we require it to stay to lower temperatures.

Answer: 

No, the product will not stop the metal getting hot, it will simply withstand the metal getting hot up to 425°C (dry heat).


Question about the product

* Required fields
(read)
Send
You might also like

Rust-Oleum Thinner 160

Rust-Oleum Thinner 160 is a specially formulated blend of solvents designed to mix with Rust-Oleum's 1085 Galva Zinc, 9100 High Performance Epoxy and B95 Flexible Epoxy to create an optimal consistency for application whether it be for Brush, Roller or Spray. Can also be used for the cleaning of some surfaces or equipment. Strong dilution...

Price £14.25
In stock

Rust-Oleum 4200 Heat Resistant Primer

Rust-Oleum 4200 Heat Resistant Primer (orange in colour) provides heat resistance up to 425°C dry heat on metal substrates, including application on boiler fronts, incinerators, stacks, breechings, kilns and similar surfaces subject to high temperatures and rust producing conditions. Also known as 4268 Heat Resistant Primer. Withstands...

Price £117.07
In stock

Rust-Oleum 4200 Heat Resistant Topcoat

Rust-Oleum 4200 is a heat resistant aluminium finish topcoat providing heat resistance up to 425°C which should be applied over surfaces primed with Rust-Oleum 4200 Heat Resistant Primer. Withstands continuous exposure to temperatures of up to 425°C Long-term gloss retention Nice aluminum finish Single pack, easy to apply One coat is...

Price £117.07
In stock