Coo-Var Heat Resistant Satin Black Enamel is a high quality, black paint for use at temperatures up to 600°C indirect heat. ADVANTAGES Great heat resistance Apply direct Fast drying time Satin finish Great for domestic use Low sheen
Rust-Oleum 4200 Heat Resistant Primer
Rust-Oleum 4200 Heat Resistant Primer (orange in colour) provides heat resistance up to 425°C dry heat on metal substrates, including application on boiler fronts, incinerators, stacks, breechings, kilns and similar surfaces subject to high temperatures and rust producing conditions. Also known as 4268 Heat Resistant Primer.
Rust-Oleum 4200 Heat Resistant Primer provides heat resistance up to 425°C dry heat on metal substrates. It should be finished with Rust-Oleum 4200 Heat Resistant Topcoat.
Features & Benefits
- Withstands continuous exposure to temperatures of up to 425°C
- Contains rust-inhibitive pigments
- Single pack, easy to apply
- Lead and chromate free
- Economical coverage
Rust-Oleum 4200 Heat Resistant Primer is for application on boiler fronts, incinerators, stacks, breechings, kilns and similar surfaces subject to high temperatures and rust producing conditions. Should be used on new, bare steel or blasted steel surfaces.
Be the first to ask a question about this product!
Jotun Solvalitt is designed as a white or black heat resistant coating suitable for insulated and non insulated surfaces. It is a one component physically drying silicone acrylic coating that is heat resistant up to 600°C. It can be used as a primer, mid coat or finish coat in atmospheric environments.
International Intertherm 50 is a single component, high temperature coating, suitable for temperatures up to 540°C (1004°F) for the protection of steel from corrosion on areas including flare stacks, chimneys, exhausts, vents and pipework, etc.
Blackfriar Quick Drying Radiator Paint can withstand temperatures of up to 150°C/300°F, and is a white finish paint that is specially formulated for interior use on radiators, pipework and storage heaters. It is hard wearing, and does not yellow with age.
International Intertherm 751 CSA is a high performance coating that is applied using standard application equipment and cures effectively at ambient temperatures. Capable of providing corrosion protection to steel in both atmospheric service and under thermal insulation operating in thermal cyclical conditions between -196°C (-321°F) and 400ºC...
Jotun Solvalitt Alu is a one component physically drying silicone acrylic coating that is an aluminium pigmented product leaving a metallic silver finish. It is heat resistant up to 600°C and can be used as a primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and...
Rust-Oleum 4200 is a heat resistant aluminium finish topcoat providing heat resistance up to 425°C which should be applied over surfaces primed with Rust-Oleum 4200 Heat Resistant Primer.
International Intertherm 875 is a single component, intermediate temperature finish for use in a wide range of industrial environments as a heat resistant finish coat for application over properly primed steelwork in both new construction and as a maintenance coating at temperatures up to 260°C (500°F).
Duram NS5 Metcote Etch Primer is a high adhesion metal primer with excellent etching qualities. This quality metal primer is solvent based and contains acids and adhesion promoters that etch the metal surface ensuring excellent adhesion. NS5 Metcote Etch Primer is quick drying and can be topcoated with most paints within two hours of application.
Jotun Resist 86 is a two component moisture cured inorganic zinc ethyl silicate coating that is a fast curing, very high zinc dust containing product. Specially designed by Jotun as a primer in coating systems where extended durability is required. It provides a solid foundation for the optimal performing coating system in the toughest exposures.
International Intertherm 891 is a one component, general purpose heat resistant paint for use as a heat resistant coating for general site use or as an industrial maintenance coating on both ambient and high temperature steelwork up to 315ºC (600ºF) where an economical aluminium finish is required.
A heat-resistant up to 350°C, super-fast zinc rich primer containing pure zinc as pigment to provide excellent protection against corrosion. Should be used on new, bare steel or galvanised steel surfaces as a primer or as a single coat finish in light industrial exposures, corrosive environments and high humidity areas.
Jotun Solvalitt Midtherm Alu is an aluminium pigmented version of the standard Solvalitt Midtherm producing a metallic silver finish. A one component physically drying silcione acrylic coating that is heat resistant up to 260°C. It can be used as a primer, mid coat or finish coat in atmospheric environments.
Jotun Aluminium Paint H.R. is a one component styrene modified oxidatively drying alkyd coating that is heat resistant up to 250°C. It can be used as an exterior aluminium finish usually within an alkyd system. Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel and aluminium substrates.
Nu-Base PU Floor Finish has the power to withstand tough applications, where temperatures may reach 150°C, or where chemicals may be present. Advantages Excellent for industrial flooring. Two pack solvent-based. FeRFA Class Type 2. Excellent for industrial flooring.
Sherwin-Williams Heat-Flex Hi-Temp 1200 is the next generation single- component inert multipolymeric matrix coating that outperforms alternatives in combating corrosion under insulation (CUI) and in high heat applications.