1802 Surface Tolerant Epoxy Primer
  • 1802 Surface Tolerant Epoxy Primer

1802 Surface Tolerant Epoxy Primer

Offers excellent substrate ‘wetting’ properties making it suitable for hand prepared steel as well as blast cleaned steel. Provides good chemical and solvent resistance, with high film builds achievable in just one coat.

Colour
Size
£68.79
VAT excluded

£82.55 Tax incl.
Quantity

Description

Offers excellent substrate ‘wetting’ properties making it suitable for hand prepared steel as well as blast cleaned steel. Provides good chemical and solvent resistance, with high film builds achievable in just one coat.

Intended to be used as a primer coat for 1803 HB Epoxy Intermediate/Finish as a two coat system providing long term protection for metal substrates. Ultimate protection can be achieved by finishing the system with a coat of 1804 High Build Polyurethane Finish, increasing the system performance to 25 years!

• Excellent adhesion even to minimally prepared surfaces.
• Tough, durable and chemical resistant
• High film builds in just 1 coat

Product Details

Data sheet

Typical Coverage (per coat)
6.4m² per litre
Touch Dry
Application
Brush, Spray

Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Carboline Carboguard 635

An all-purpose immersion-grade epoxy that can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Top Features Low temperature cure (20°F) Excellent corrosion protection Excellent application characteristics Fast recoat times

Price £208.13
In stock

Sherwin-Williams Macropoxy M111

Sherwin-Williams Macropoxy M111 is a 2-pack epoxy zinc phosphate primer for application to surfaces which have been prepared by wet abrasive blasting. It may also be applied to grit blasted surfaces and for surfaces prepared by UHP water blasting where existing blast profile is exposed. 

Price £79.15
In stock

International Intergard 307

International Intergard 307 is a two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification. International Intergard 307 is intended to be used as a primer or blast primer under high build epoxy coating schemes for new construction.

Price £61.79
In stock

Rust-Oleum 569/580 Quick Drying Metal Primer

Rust-Oleum 569/580 Quick Drying Metal Primer is a single pack quick drying metal primer for bare and lightly rusted metal. It should be used on new, blasted or slightly rusted steel surfaces. Depending on the exposure conditions, it can be recoated with a variety of Rust-Oleum Systems assuring the appropriate protection.

Price £19.16
In stock

SikaCor EG 1

SikaCor EG 1 is a two-pack, high-solids, epoxy-based intermediate coat containing micaceous iron oxide. The coating is designed as a mechanically resistant intermediate coat on steel surfaces exposed to atmospheric conditions, hot-dip galvanized steel, zinc-spray, stainless steel and aluminium.

Price £70.52
In stock

Jotun Muki AC

A one component waterborne primer from Jotun that is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and back burning. It is fast drying making it suitable for stacking shortly after application. Jotun Muki AC is a one component physically drying waterborne acrylic coating.

Price £134.43
In stock

Rust-Oleum 3202 Galvinoleum Primer

Rust-Oleum 3202 Galvinoleum Primer is a single pack super adhesion primer for galvanised steel, plastic or other smooth surfaces. Should be used on galvanised steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces. Only intended for brush application and can be recoated with Rust-Oleum 7500 Alkythane.

Price £17.82
In stock

Cromadex 902 One Pack Etch Primer

Cromadex 902 One Pack Etch Primer is a one pack etch primer that can be both air dried and stoved making it suitable for use in most paint shops. The product has enhanced adhesion properties to mild steel ensuring the success of the coating system. Cromadex 902 is available in white, grey and black.

Price £76.17
In stock

Carboline Carboguard 60

A high solids and abrasion resistant coating which can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. Top Features Low odor and low VOC Good chemical resistance Used as a primer, intermediate, or finish...

Price £250.50
In stock

International Interprime 539

International Interprime 539 is a single component modified polyvinyl butyral, phosphoric acid etch primer free from zinc chromate. Itended for use as a pretreatment primer designed to promote adhesion and seal the surface of non-ferrous metals such as aluminium, copper, brass, cadmium, zinc and nickel.

Price £57.50
In stock

Cromadex 903 Two Pack Chromate-Free Etch Primer

Cromadex 903 Two Pack Chromate-Free Etch Primer is a two pack chromate-free etch primer designed for use over a wide range of substrates. It is formulated without the use of zinc tetroxy-chromate helping to reduce health and safety concerns. Cromadex 903 should be used to improve adhesion and corrosion resistance of all systems used over metal substrates.

Price £143.01
In stock

Jotun Muki Z 2001

An all-round excellent choice for the temporary protection of steel exposed to highly corrosive environments. Muki Z 2001 from Jotun has a solid track record and a reputation built on satisfied customers in a range of industries and countries worldwide. Jotun Muki Z 2001 is a two component inorganic low zinc moisture curing zinc ethyl silicate coating...

Price £119.64
In stock

Sherwin-Williams Macropoxy M182

Sherwin-Williams Macropoxy M182 (formerly known as Resistex M182) is a single pack epoxy anti-corrosive primer, used as an oil resisting primer for application onto ferrous substrates.

Price £161.94
In stock

Teamac Zinc Rich Primer

A cold galvanising paint with a very high concentration of metallic zinc providing cathodic protection and is suitable for bare iron and steel to provide the best corrosion proteciton.

Price £34.27
In stock

Sherwin-Williams Transgard TG111V2

Sherwin-Williams Transgard TG111V2 is a high build 2-pack epoxy zinc phosphate primer/buildcoat, designed as anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning.

Price £86.17
In stock