Teamac Red Oxide Primer, is an inexpensive primer based upon iron oxide for use on structural steelwork, iron and metalwork which can be left as a short term finish or overcoated with Teamac Marine or Industrial coatings.
Traditional general purpose primer for iron and steel
Provides flat finish for topcoats to adhere to
Perfect for steel & cast iron
Suitable for narrowboats, cruisers, barges and marine structures
Teamac Acrylic Coating, is an inexpensive primer based upon iron oxide for use on structural steelwork, iron and metalwork which can be left as a short term finish or overcoated with Teamac Marine or Industrial coatings.
Suitable for narrowboats, cruisers, barges and marine structures. It can be applied to suitably prepared steel and cast iron. Where there is heavy oxidation that cannot be removed it can be used over Teamac Rust Converter.
The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.
Drying Times
Drying Times At 20°C/RH 50%
Touch Dry:
2 Hours
Dry To Handle:
12 Hours
Dry To Recoat:
12 hours or overnight
Fully Cured:
5 - 7 Days
Low temperature and high humidity will adversely affect application, drying and performance of any coating.
Surface Preparation
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates.
Bare steel should be free from dust, rust and scale.
Blast cleaning to SA 2½ is recommended.
If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree.
Any oil or grease should be removed with CooVar Degreaser before de-rusting.
Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts, welds etc.
Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.
Preceeding Coat
N/A
Mixing
Mix well before use.
Application Conditions
As dictated by normal good painting practice.
Care must be taken during application that the temperature is above the dew point to avoid any contamination.
In confined spaces, provide adequate ventilation during application and drying.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Teamac Red Oxide Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application.
Suitable for use with Brush, Roller or Spray.
Teamac Thinner 14 can also be used for the cleaning of some surfaces prior to application of the coating.
Also suitable for the cleaning of...
Coo-Var Universal Degreaser Cleaner is a careful blend of solvents to give powerful cleaning and degreasing properties.
Product Features
Degreases and removes oil patches from floors, walls, interior and exterior surfaces prior to acid etching or painting.
Part of the cleaning process.
Essential for a good finish.
Can also be used as a...
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.
Provides an economical way of making sure you will have what you need
Ideal for interior and exterior paint projects
Click to jump down to...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...
Cat on 2023-02-16 15:25:57
