This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend Jotun Jotamastic 80 as a great alternative. Jotun Jotamastic 70 is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids product. Can be used as primer or mid coat in atmospheric environments....
Jotun Penguard Express B12
Jotun Penguard Express B12 is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product that can be used as a primer, mid coat, finish coat or as a single coat system. Approved to meet the requirements of UK Highway Agency Item 112 for use on bridges and highway infrastructure.
Jotun Penguard Express B12 is a two component amine cured epoxy coating that is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product. It conforms to the requirements of BS5493:1977 and is ideal for new construction or maintenance where fast dry to handle and over coating times are required.
Jotun Penguard Express B12 can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments. Suitable for properly prepared carbon steel, aluminium, concrete and galvanised steel substrates. It can be applied at sub zero surface temperatures.
Jotun Penguard Express B12 is suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment.
Approved to meet the requirements of UK Highway Agency Item 112 for use on bridges and highway infrastructure.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
A high-solids, zinc-filled epoxy primer for corrosion protection of structural steel in highly corrosive environments including offshore, marine and industrial. Top Features Protects steel galvanically Outstanding application properties Tough and abrasion resistant film
A high solids corrosion resistant primer or intermediate coat over steel and inorganic zinc primers. Top Features Excellent corrosion protection Good abrasion resistance Cures down to 40°F
International Intergard 307 is a two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification. International Intergard 307 is intended to be used as a primer or blast primer under high build epoxy coating schemes for new construction.
Macropoxy 267 (formerly known as Sherwin-Williams Macropoxy C267V3 and as Epigrip C267V3) is a high solids 2-pack epoxy, pigmented with micaceous iron oxide. It is used as an undercoat in conjunction with high performance primers. Macropoxy 267 has excellent resistance to moisture, aliphatic solvents, abrasion, alkali spillage, weather and...
PPG SigmaZinc 109 HS is a two-component, high solids polyamide adduct cured zinc rich epoxy primer designed as a system primer for various paint systems. This coating is a very good primer for systems with high solids epoxy buildcoats. Excellent anti-corrosive properties Quick-drying Complies with SSPC-Paint 20 level 2 and ISO 12944.5...
Sherwin-Williams Macropoxy K267 (formerly known as Epigrip K267/Transgard TG121) is a two-pack, pigmented with micaceous iron oxide, designed as an intermediate coat in conjuction with Macropoxy high performance primers.
An all-purpose immersion-grade epoxy that can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Top Features Low temperature cure (20°F) Excellent corrosion protection Excellent application characteristics Fast recoat times
A quick drying, White Spirit based alkyd topcoat with good light and weather resistance that is suitable for interior and exterior use. Top Features May be diluted up to 20% 24 month shelf life High gloss finish
International Intergard 214 is a two component epoxy sealer coat pigmented with aluminium flake for the effective penetration and sealing of thermally sprayed aluminium coatings to eliminate porosity. Has specification approval for UK Department of Transport Item No.159.
Rust-Oleum 3202 Galvinoleum Primer is a single pack super adhesion primer for galvanised steel, plastic or other smooth surfaces. Should be used on galvanised steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces. Only intended for brush application and can be recoated with Rust-Oleum 7500 Alkythane.
From Jotun, this primer is for structural steel and piping in highly corrosive environments, ideal for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Jotun Barrier 77 is a two component polyamide cured zinc rich epoxy coating.
A high build fast drying modified alkyd primer for use on ferrous metals. Ideal for priming in industrial and factory environments. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004 Advantages Can be applied up to 75-100 microns Protects against corrosion on properly prepared steel Dries quick
Coo-Var Anti-Corrosive Red Oxide is a strong alkyd-based red oxide product designed to be applied direct to metal surfaces. It is a general purpose primer and finish in one coat. ADVANTAGES Primer and finish in one Can be over-coated at a later date Apply direct Protects and decorates Rapid dry version available
Sherwin-Williams Transgard TG110 is a zinc phosphate pigmented 2-pack epoxy temporary protective primer, used as a temporary protective for steel surfaces prepared by abrasive blast cleaning.