Jotun Penguard WF is a two component, anti-corrosive water borne epoxy coating that is a versatile, fast drying product containing flash rust inhibitors. It is specially designed for new construction where fast dry to handle and over coating times are required. Jotun Penguard WF can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
Note: this product is made to order and has a minimum order quantity of 800 litres.
Jotun Penguard WF is a two component, anti-corrosive water borne epoxy coating that is a versatile, fast drying product containing flash rust inhibitors. It is specially designed for new construction where fast dry to handle and over coating times are required. Jotun Penguard WF can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments and is suitable for properly prepared carbon steel, aluminium, concrete and galvanised steel substrates. Jotun Penguard WF is also available in a Winter Grade version for application at low substrate temperatures.
Suitable for structural steel and piping to be exposed to corrosive environments up to high. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment. Jotun Penguard WF is suitable for over coating with water borne acrylics, water borne epoxy and suitable solvent borne coatings.
Features & Benefits
Expected lifetime >15 years in atmospheric environments
Fast dry-to-recoat and dry-to-handle
Ideal for LEED® v4 projects
Visible end of pot life
Transport and storage down to sub-zero temperatures
Approved as primer under Steelmaster intumescent coatings
Low VOC: 67/69 (WG) g/L
Recommended Systems
Jotun Penguard WF can be used alone or as part of a coating system in a wide range of atmospheric conditions:
As a single coat in low corrosive areas:
Penguard WF
As a primer and mid coat in a complete paint system in medium corrosive areas:
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Jotun Penguard WF WG is a two component, anti-corrosive water borne epoxy coating that is a versatile, fast drying product containing flash rust inhibitors. It cures down to 5°C and is specially designed for new construction where fast dry to handle and over coating times are required.
Note: this product is made to order and has a minimum...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
