International Intercure 420 is a two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
Thermilate Trade Universal Primer
Thermilate Trade Universal Primer is a solvent-borne primer formulated for interior and exterior use, based on an anti-corrosive zinc phosphate pigment and alkyd resin it is suitable for use under a wide variety of conventional finishes, combining excellent adhesion and ease of application.
Thermilate Trade Universal Primer is a solvent-borne primer formulated for interior and exterior use, based on an anti-corrosive zinc phosphate pigment and alkyd resin it is suitable for use under a wide variety of conventional finishes, combining excellent adhesion and ease of application. Convenient for small-scale maintenance work and spot-priming a variety of surfaces like wood, metal and dry plaster. Can be used over suitably prepared galvanised metal.
Features & Benefits
- Especially suitable for multi-surface work.
- Anti-corrosive pigment.
- Suitable for interior and exterior use.
- Prevents stains from seeping through to new painted surface.
- Contains zinc phosphate.
- Provides adhesive surface for new paint application.
- Prevents the spread of corrosion.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 5 - 8m² per litre
- Touch Dry
- 1 Hour
- Brush, Roller, Spray
|ian on 18/02/2018|| |
is thermilate trade universal primer ok on anodised aluminium?
No, anodised aluminium is particularly difficult to obtain adhesion to, so we would suggest a trial using Rust-Oleum Mathys Pegalink Universal Adhesion Primer prior to application of a topcoat.
A rust preventing primer. Typically used as a primer above water line on areas like superstructure, topside, deck, stores room, cargo hold etc. Top Features Quick drying, White Spirit based alkyd primer May be topcoated with alkyd paints as recommended Can be thinned
An all-purpose immersion-grade epoxy that can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Top Features Low temperature cure (20°F) Excellent corrosion protection Excellent application characteristics Fast recoat times
Nu-Steel TP Aluminium Primer is an epoxy-based coating, for use on properly prepared steelwork, such as parapet/guard rails, bridges and architecture. Advantages Metallic Aluminium finish. Touch-dry in 3 hours. 8m²/Litre average coverage. 12-month shelf life.
Rust-Oleum Hard Hat 2185/1085 Galva Zinc is the No.1 high zinc content coating providing superior protection and durability for metals exposed to the elements or adverse artificial conditions. Can be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas. 90% zinc content, touch dry...
International Interzinc 22 is a two component, rapid recoat, inorganic zinc rich ethyl silicate primer and is part of the Interzinc 22 Series of products that deliver consistently fast re-coating across a choice of 85%, 80%, 77% or 65% minimum zinc content products. The variable zinc levels allow you to tailor your choice of product to meet...
A low-temperature and rapid curing primer/finish with an extended recoat window. Provides excellent corrosion resistance as a primer, intermediate or finish on steel substrates. Top Features Low temperature cure characteristics. Rapid handling for in-shop applications. Low yellowing compared to other epoxies. VOC compliant to current...
An all-round excellent choice for the temporary protection of steel exposed to highly corrosive environments. Muki Z 2001 from Jotun has a solid track record and a reputation built on satisfied customers in a range of industries and countries worldwide. Jotun Muki Z 2001 is a two component inorganic low zinc moisture curing zinc ethyl silicate coating...
Cromadex 2100 One Pack Universal Primer is a one pack primer containing zinc phosphate giving added corrosion resistance for greater durability. It is fast drying helping to improve productivity. It can be air dried or stoved giving flexibility in production. Available in white, grey, red oxide and buff as standard, it can also be tinted to ensure...
Cromadex 902 One Pack Etch Primer is a one pack etch primer that can be both air dried and stoved making it suitable for use in most paint shops. The product has enhanced adhesion properties to mild steel ensuring the success of the coating system. Cromadex 902 is available in white, grey and black.
Sherwin-Williams Macropoxy L674 (formerly known as Metagard L674/Transgard TG223) is a 2-pack epoxy zinc phosphate blast primer for carbon steel surfaces prepared by abrasive blast cleaning.
A primer for carbon steel, repair of inorganic zinc silicate coating and damaged galvanised steel substrates in highly corrosive environments. Jotun Barrier 80 is a two component polyamide cured zinc rich epoxy coating. Click here for more Jotun products.
Sherwin-Williams Transgard TG116 is a two pack epoxy undercoat for abraded surfaces. It is used for application onto suitably primed surfaces, as an undercoat for use under suitable high performance finishes.
Coo-Var Anti-Corrosive Red Oxide is a strong alkyd-based red oxide product designed to be applied direct to metal surfaces. It is a general purpose primer and finish in one coat. ADVANTAGES Primer and finish in one Can be over-coated at a later date Apply direct Protects and decorates Rapid dry version available
International Interzinc 42 is a two component, metallic zinc primer designed for use in maintenance situations and as a primer at new construction. To be used as part of a coating system for structures in aggressive environments in a wide range of industries.