Sherwin-Williams Macropoxy M182 (formerly known as Resistex M182) is a single pack epoxy anti-corrosive primer, used as an oil resisting primer for application onto ferrous substrates.
SikaCor EG 1 Rapid
SikaCor EG 1 Rapid is a fast drying version of the standard SikaCor EG 1. It is a two-pack, high-solids, epoxy-based intermediate coat containing micaceous iron oxide. It is designed as a mechanically resistant intermediate coat on steel surfaces exposed to atmospherical conditions, hot-dip galvanized steel, zinc-spray, stainless steel and aluminium.
SikaCor EG 1 Rapid is a fast drying version of the standard SikaCor EG 1. It is a two-pack, high-solids, epoxy-based intermediate coat containing micaceous iron oxide.
- SikaCor EG 1 Rapid is designed as a mechanically resistant intermediate coat on steel surfaces exposed to atmospherical conditions, hot-dip galvanized steel, zinc-spray, stainless steel and aluminium.
- In combination with 2-pack primer and top coats, SikaCor EG 1 Rapid is a mechanically water and chemically resistant coating system for durable corrosion protection, corrosivity category C5-I resp. C5-M, protection duration ‘high’ according to ‘DIN EN ISO 12944-5’.
Features & Benefits
- Excellent adhesion to galvanizing, stainless steel and aluminium
- High film thickness per coat (up to 120 microns)
- Overcoatable at low temperatures till – 10°C
- Very good corrosion protection properties
- Tough elastic and dense but not brittling
- Usually insensitive against shock and impact
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
An all-round excellent choice for the temporary protection of steel exposed to highly corrosive environments. Muki Z 2001 from Jotun has a solid track record and a reputation built on satisfied customers in a range of industries and countries worldwide. Jotun Muki Z 2001 is a two component inorganic low zinc moisture curing zinc ethyl...
Coo-Var Red Oxide Metal Primer is a good general purpose metal primer for ferrous metallic objects (iron and steel). To be used for short periods of exposure during transportation/storage or to be overcoated with a suitable Coo-Var / Teamac topcoat to provide a durable lasting finish for metal.
Macropoxy 267 (formerly known as Sherwin-Williams Macropoxy C267V3 and as Epigrip C267V3) is a high solids 2-pack epoxy, pigmented with micaceous iron oxide. It is used as an undercoat in conjunction with high performance primers. Macropoxy 267 has excellent resistance to moisture, aliphatic solvents, abrasion, alkali spillage, weather and...
Nu-Steel® TP Etch Primer is a two pack primer giving excellent adhesion to metals prior to subsequent paint systems. Advantages Up to 8 years protection. Available in yellow or grey. 15m²/Litre approx. coverage rate. 12-month shelf life.
Rust-Oleum 769/780 Damp-Proof Rust Primer is a single pack rust primer for direct application on slightly moist or dry metal surfaces. It is specially developed to be applied on hand tool prepared sound rusted steel surfaces.
This primer from Jotun is excellent in atmospheric environments, it provides corrosion protection as part of a complete coating system to carbon steel substrates. Jotun Barrier ZEP is a two component polyamide cured zinc epoxy coating.
Cromadex Monozinc One Pack Zinc-Rich Primer is a one pack, zinc-rich primer. Based on epoxy ester resin it is heat resistant to 400°C. It provides galvanic protection to new steelwork and can also be used to repair two pack zinc-rich primers. Monozinc contains more than 90% Zinc in the dry film.
Nu-Steel Zinc Rich Primer has been specifically-formulated to prime mild steel surfaces to prepare it for overcoating with the finish of your choosing. Steel with low carbon is termed as mild steel, and such uses of this type of steel include: signs, furniture, fencing, cars and structural steel. Advantages Interior and exterior use. 3-5m²/Litre....
Nu-Steel TP Aluminium Primer is an epoxy-based coating, for use on properly prepared steelwork, such as parapet/guard rails, bridges and architecture. Advantages Metallic Aluminium finish. Touch-dry in 3 hours. 8m²/Litre average coverage. 12-month shelf life.
Rust-Oleum 3202 Galvinoleum Primer is a single pack super adhesion primer for galvanised steel, plastic or other smooth surfaces. Should be used on galvanised steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces. Only intended for brush application and can be recoated with Rust-Oleum 7500 Alkythane.
Jotun Penguard WF is a two component, anticorrosive water borne epoxy coating that is a versatile, fast drying product containing flash rust inhibitors. It is specially designed for new construction where fast dry to handle and over coating times are required. Jotun Penguard WF can be used as primer, mid coat, finish coat or as single coat...
Tor QD High Build Container Coating, a semi-gloss, quick-drying high build anti-corrosive primer finish for blast cleaned or mechanically cleaned mild steel. Use to paint containers/plant and equipment in a single coat application. Available in over 400 colours in the RAL and BS range Ready for overcoating after 4 hours Application by...
PPG AquaCover 400 (also known as Sigma Aquacover 400) is a two-component, polyamine-cured, waterborne epoxy coating for steel structures in atmospheric exposure, touch dry in 90 minutes. Also suitable for concrete floors. Top Features Particularly suitable when solvents are not permitted because of health and safety reasons Free from...
Sika Permacor 2706 EG is a 2-pack mio-protective coating based on epoxy resin with high mechanical resistance and outstanding adhesion. Tested and official approved primer for Sika Unitherm fire protection systems on steel.