Sika Permacor 2706 EG
  • Sika Permacor 2706 EG

Sika Permacor 2706 EG

Sika Permacor 2706 EG is a 2-pack mio-protective coating based on epoxy resin with high mechanical resistance and outstanding adhesion. Tested and official approved primer for Sika Unitherm fire protection systems on steel.

Colour
Size
£251.69
VAT excluded

£302.03 Tax incl.
Quantity

Description

Sika Permacor 2706 EG is a 2-pack mio-protective coating based on epoxy resin with high mechanical resistance and outstanding adhesion. Tested and official approved primer for Sika Unitherm fire protection systems on steel.

Sika Permacor 2706 EG is used as primer for galvanized steel and also as primer under Sika Unitherm fire protection systems, as well as intermediate coating for atmospheric corrosion protection on steel.

Features & Benefits

  • Coating with high mechanical resistance
  • For primed steel, directly on galvanized steel, sprayed zinc, stainless steel and aluminium
  • High content of mio offers dense and highly resistant layers

For more details please download the product data sheet from the 'DATASHEETS' tab above.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Typical Coverage (per coat)
8m² per kg
Touch Dry
8 Hours
Application
Brush, Roller, Spray
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Rust-Oleum 1060/1080 High Build Metal Primer

Rust-Oleum 1060/1080 High Build Metal Primer is for extra protection of bare or blasted metal, offers maximum durability under severely corrosive conditions. It assures appropriate protection under light industrial exposure conditions, if applied on a Rust-Oleum metal primer followed by Rust-Oleum 7500 Alkythane.

Price £86.96
In stock

Zinga Zingaceram HS

Zingaceram HS, a high solid 2 pack intermediate coat to be applied as a sealer over Zinga. The coating has been used on both structural steelwork (for multi-million pound projects) and on sub-sea pipelines. 2 pack system Seals Zinga with good compatibility Apply by brush, roller, conventional sprayer or by airless spraying High solid...

Price £105.50
In stock

International Intergard 475HS

International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties.

Price £259.69
In stock

Jotun Barrier ZEP

This primer from Jotun is excellent in atmospheric environments, it provides corrosion protection as part of a complete coating system to carbon steel substrates. Jotun Barrier ZEP is a two component polyamide cured zinc epoxy coating.

Price £87.19
In stock

International Intercure 384

International Intercure 384 is a two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977

Price £85.76
In stock

Jotun Barrier

Jotun Barrier is a two component polyamide cured zinc rich epoxy coating. From Jotun, this is a very high zinc dust containing product and it conforms to the compositional requirements of SSPC paint 20, level 2. Jotun Barrier provides very good corrosion protection as part of a complete coating system. To be used as primer in atmospheric environments. 

Price £76.66
In stock

Carboline Carboweld 11

A weldable pre-construction inorganic zinc primer for shop use only. Designed to protect steel during construction phase of projects under normal conditions. Top Features Weld spatter does not adhere to or damage the coating Dries to touch and to handle in 3 to 5 minutes Flat finish

Price £308.25
In stock

Nullifire PM015 Aluminium Epoxy Primer

Nullifire PM015 Aluminium Epoxy Primer is a high-build, low temperature curing modified aluminium epoxy mastic. Nullifire PM015 provides unequaled levels or barrier protection and corrosion resistance over existing finishes and rusted or St2/St3 cleaned steel.

Price £89.40
In stock

407 Multi Surface Primer

This low odour, high opacity white primer/sealer is suitable for most surfaces including tiles, wood, metal (including galvanised), plaster, existing paint, masonry and most plasics (test a small area first).

Price £23.39
In stock

International Intergard 269

International Intergard 269 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance.

Price £52.04
In stock

Jotun Penguard HSP

Jotun Penguard HSP is a two component polyamide cured epoxy coating that is fast drying, high solids and high build. This Jotun product can be used as a primer or mid coat in atmospheric environments, specially designed for new construction where fast dry to handle and over coating times are required.

Price £106.00
In stock

Jotun Jotamastic 70

This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend Jotun Jotamastic 80 as a great alternative. Jotun Jotamastic 70 is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids product. Can be used as primer or mid coat in atmospheric environments....

Price £34.13
In stock

Sherwin-Williams Macropoxy L674

Sherwin-Williams Macropoxy L674 (formerly known as Metagard L674/Transgard TG223) is a 2-pack epoxy zinc phosphate blast primer for carbon steel surfaces prepared by abrasive blast cleaning.

Price £66.34
In stock

Nullifire PM018 Primer or Top Seal Epoxy Coating

Nullifire PM018 Primer or Top Seal Epoxy Coating is a two-components modified epoxy coating. It is a heavy duty, high build coating for protection of steel in corrosive environments and is excellent for use at low temperatures. 

Price £311.85
In stock

Coo-Var Anti-Corrosive Red Oxide

Coo-Var Anti-Corrosive Red Oxide is a strong alkyd-based red oxide product designed to be applied direct to metal surfaces. It is a general purpose primer and finish in one coat. ADVANTAGES Primer and finish in one Can be over-coated at a later date Apply direct Protects and decorates Rapid dry version available

Price £15.07
In stock

Britannia Zinc Phosphate Metal Primer

A metal primer for ferrous metals such as iron and steel that offers sound anti-corrosion properties and superb capacity and coverage. Can be used over existing paintwork. Examples of Use Bridges Metal artwork Metal trusses Warehouses Factories

Price £27.34
In stock