For over five decades, Carbozinc 11 has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide. Top Features Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces. Rapid cure. Dry to handle in 45 minutes at 60°F (16°C) and 50% relative humidity. High zinc...
International Intercure 200HS
A fast drying reputation isn't all International Intercure 200HS is renowned for. Complete with MIO, this fast cure anti-corrosive primer/intermediate with added barrier protection, can improve your productivity and lower your solvent emissions.
International Intercure 200HS is a two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer offering excellent barrier protection, low temperature cure and rapid overcoating properties.
- As a primer for steelwork intended for use in a wide range of environmental conditions including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges.
- Suitable for overcoating within 7 hours in most climatic conditions hence speeding up production and throughput in fabrication shops.
- Provides quick cure even at low temperatures often encountered in maintenance painting.
Features & Benefits:
- Primer and intermediate in just one coat
- Rapid recoat times
- Low temperature cure, cures down to 0°C (32°F)
- Zinc phosphate for anti corrosive performance
- Contains MIO for enhanced barrier protection
- Extended recoatability allows flexibility when top coating
- Can be applied at 200μm (6-8 mils) in a single coat
- Available in a variety of colors
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Sherwin-Williams Transgard TG116 is a two pack epoxy undercoat for abraded surfaces. It is used for application onto suitably primed surfaces, as an undercoat for use under suitable high performance finishes.
A fast-drying steel primer that provides corrosion protection on structural steel. Well suited for fabrication shops that need fast cure to dry and handle times. Top Features Rapid cure and fast-drying VOC compliant for most areas Good for filling properties on rough and pitted steel
PPG AquaCover 20 (also known as Sigma Aquacover 20) is a one-component waterborne, high-build zinc phosphate primer/coating, based on acrylic dispersion. It can be overcoated with most waterborne acrylics, solvent-borne epoxy coatings and alkyd paints, as well as certain solvent-borne, two-component products. Useful for when solvents are...
Cromadex 230 Stoving Primer Filler is a stoving primer filler containing melamine giving improved durability. The product can be overcoated wet-on-wet enabling rapid application. Cromadex 230 Stoving Primer Filler is available in white as standard, it can also be tinted to ensure complete coverage even on difficult lead free colours.
Sherwin-Williams Macropoxy M902 (formerly known as Epigrip M902) is a low temperature curing hi-build 2-pack epoxy brushing aluminium primer coating capable of curing down to 0°C.
International Interplate 398 is a two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application. It is intended to pre-prime steel prior to the fabrication process and can can be overcoated with a large range of coating systems.
A high solids, epoxy intermediate/finish coat, providing exceptionally high film builds (up to 200 microns DFT per coat), enabling maximum performance in a minimum number of coats. Can be used year round due to its ability to cure down to temperatures as low as 2°C.
International Intergard 400 is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing.
Nu-Steel SP Etch Primer is a single pack primer giving excellent adhesion to aluminium and other metal prior to subsequent paint systems. Advantages Available in Grey and Red Oxide. Excellent adhesion to metals. 12m²/Litre typical coverage. 12-month shelf life.
Cromadex 850 Two Pack Non-Isocyanate Acrylic Primer is a two pack non-isocyanate acrylic primer for use over a wide range of substrates. It contains zinc phosphate giving added corrosion resistance for greater durability. Formulated without isocyanate helping to reduce health and safety concerns. Cromadex 850 can be applied wet-on-wet giving...
SikaCor EG 1 is a two-pack, high-solids, epoxy-based intermediate coat containing micaceous iron oxide. The coating is designed as a mechanically resistant intermediate coat on steel surfaces exposed to atmospheric conditions, hot-dip galvanized steel, zinc-spray, stainless steel and aluminium.
Jotun Penguard Tie Coat is a two component polyamide cured epoxy coating specially designed as a tie coat/sealer on top of inorganic zinc silicate primers, galvanised steel and thermally sprayed zinc. To be used as primer in a complete system in atmospheric environments. Recommended for offshore environments, refineries, power plants,...
Rust-Oleum 3202 Galvinoleum Primer is a single pack super adhesion primer for galvanised steel, plastic or other smooth surfaces. Should be used on galvanised steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces. Only intended for brush application and can be recoated with Rust-Oleum 7500 Alkythane.
International Interzinc 72 is a two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance both as a single coat and as a primer for a high performance coating system. Contains 90% zinc by weight in the dry film.
Jotun Penguard HSP is a two component polyamide cured epoxy coating that is fast drying, high solids and high build. This Jotun product can be used as a primer or mid coat in atmospheric environments, specially designed for new construction where fast dry to handle and over coating times are required.