Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
International Intercure 420 is a two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
International Intercure 420 is a two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
Intended Uses:
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Sherwin-Williams Macropoxy L674 (formerly known as Metagard L674/Transgard TG223) is a 2-pack epoxy zinc phosphate blast primer for carbon steel surfaces prepared by abrasive blast cleaning.
Sherwin-Williams Macropoxy M111 is a 2-pack epoxy zinc phosphate primer for application to surfaces which have been prepared by wet abrasive blasting. It may also be applied to grit blasted surfaces and for surfaces prepared by UHP water blasting where existing blast profile is exposed.
PPG SigmaZinc 19 is a one-component, zinc-rich epoxy primer with good anti-corrosive properties, and whilst designed for repair of two-component zinc epoxy primers and zinc silicate primers, PPG SigmaZinc 19 can also be used as a reconditioner for aged, derusted and galvanised steel. Top Features Dries at temperatures down to –10°C (14°F)...
A high performance, surface tolerant epoxy for metal and concrete that has excellent resistance to water and wastewater exposures. Top Features High solids, low VOC High build (16 mils) Low temperature cure (20°F) Fast cure response
Jotun Alkydprimer is a one component, single pack oxidatively drying alkyd coating that can be used as primer or mid coat in atmospheric environments. Suitable for properly prepared carbon steel, aluminium and wooden substrates, this alkyd primer is deal for a wide range of industrial structures or for touch up areas in the marine industry.
A weldable pre-construction inorganic zinc primer for shop use only. Designed to protect steel during construction phase of projects under normal conditions. Top Features Weld spatter does not adhere to or damage the coating Dries to touch and to handle in 3 to 5 minutes Flat finish
Sherwin-Williams Macropoxy M400 (formerly known as Epigrip M400) is a 2-pack epoxy zinc phosphate primer, used as an anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning.
PPG Dimetcote 9 (also known as Sigmazinc 9), is a two-component, moisture-curing zinc (ethyl) silicate coating for structural steel that can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), with good resistance to impact and abrasion. Anti-corrosive primer for structural steel. Specified for structural joints...
PPG Sigma Etch, a phosphoric acid-based etch solution for treating new, unweathered galvanized surfaces, where blasting or abrasion is not possible, prior to painting. Changes color on application from blue to black to indicate the effectiveness of primary pre-treatment Meets the requirements of British Rail's 'T-wash' solution May be...
Sherwin-Williams Macropoxy M905 (formerly known as Epigrip M905) is a low temperature curing, two pack epoxy high build undercoat, capable of curing down to 0°C.
Rust-Oleum Mathys Pegalink Universal Adhesion Primer is a water based primer for indoor and outdoor use. Adheres to many surfaces: wood, gypsum, cement, bricks and especially on smooth and difficult to adhere to surfaces like: galvanised steel, copper, zinc, polycarbonate, hard PVC, Pegagraff Hydro, etc. Excellent adhesion Flexible...
Duram NS1 Rust Buster, a rust converter and primer stopping rust in its tracks with proven corrosion-fighting properties. Scientifically formulated, it chemically reacts with rust on a variety of metal surfaces and converts it into a stable, solid compound that’s ready for further priming and painting, turning from a cream-colour to blue-black...
This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend Jotun Muki Z 2001 as a great alternative. Offers excellent corrosion protection of steel during normal storage and fabrication, and reduces exposure to fumes during welding and cutting compared with high zinc shop primers. Especially...
Nu-Steel One Coat Primer/Topcoat is an anti-corrosive paint with excellent adhesion and durability. Conforms to BS 5493 the code of practice for the protective coating of iron and steel against corrosion. Advantages Up to 5 years protection Dries quick Choose from any RAL colour Anti-corrosive properties 12-month shelf life
Jotun Penguard Tie Coat 100 is a two component polyamide cured high molecular weight epoxy coating specially designed as a tie coat/sealer on top of inorganic zinc silicate primers, galvanised steel and thermally sprayed zinc. To be used as a primer in a complete system in atmospheric environments. Recommended for offshore environments,...
Zingaceram HS, a high solid 2 pack intermediate coat to be applied as a sealer over Zinga. The coating has been used on both structural steelwork (for multi-million pound projects) and on sub-sea pipelines. 2 pack system Seals Zinga with good compatibility Apply by brush, roller, conventional sprayer or by airless spraying High solid...
