International Intergard 251
  • International Intergard 251

International Intergard 251

KGA901

International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.

Colour
Size
Finish
£150.90
VAT excluded

£181.08 Tax incl.
Quantity

Description

International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems for use in the offshore, petrochemical, chemical, pulp and paper and bridge industries.

The fast drying and handling properties of International Intergard 251, together with extended overcoatability, make this an excellent primer for factory application prior to full system application on site. International Intergard 251 provides good abrasion resistance which minimises mechanical damage in transit between the factory and site.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
KGA901

Data sheet

Manufacturer
International
Water / Solvent Based
Solvent
For Use On
Shop Primed Steel, Steel
Application Method
Spray, Airless Spray, Brush, Roller
Sheen
Matt
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Pack Size
20L
Mixing Ratio
4 part(s) : 1 part(s) by volume
Application
Brush, Roller, Spray
Coverage
12m² per litre
Recommended Thinner/Cleaner
International GTA220, GTA415
Solids by Volume
63% ± 2%
VOC
390 g/lt
Shelf Life (from date of manufacture)
12 months minimum at 25°C
Touch Dry
10°C: 2 hours, 15°C: 1 hour, 25°C: 45 minutes, 40°C: 30 minutes
Touch Dry
45 mins
Recommended Dry Film Thickness
50-75 microns
Recommended Wet Film Thickness
79-119 microns
UN Number (Activator)
UN1263
UN Number (Base)
UN1263
Hard Dry
10°C: 7 hours, 15°C: 5 hours, 25°C: 3 hours, 40°C: 2 hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send