International Intergard 307
  • International Intergard 307

International Intergard 307

EPA110/EPA210
INT1822

International Intergard 307 is a two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification. International Intergard 307 is intended to be used as a primer or blast primer under high build epoxy coating schemes for new construction.

Colour
Size
Finish
£77.37(ex. VAT)
£92.84 (inc. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

Description

International Intergard 307 is a two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification. International Intergard 307 is intended to be used as a primer or blast primer under high build epoxy coating schemes for new construction.

International Intergard 307 has the following specification approvals:

  • UK Highways Agency Item No. 110
  • UK Network Rail Systems N2, M21

International Intergard 307 is intended for use as a thin film epoxy primer, or blast primer, as part of approved UK Highways Agency and Network Rail protective schemes, typically under high build epoxy glass flake coatings.

International Intergard 307 contains a high proportion of zinc phosphate, to comply with the requirements of the Highways Agency but is not suitable as a primer for systems designed for permanent water immersion.

The following topcoats/intermediates are recommended for Intergard 307:

Product Details
EPA110/EPA210

Data sheet

Manufacturer
International
Water / Solvent Based
Solvent
For Use On
Steel
Sheen
Matt
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Pack Size
5L
Mixing Ratio
3 part(s) : 1 part(s) by volume
Coverage
17.2m² per litre
Recommended Thinner/Cleaner
International GTA220
Solids by Volume
43%
VOC
351 g/kg
Shelf Life (from date of manufacture)
18 months minimum at 25°C
Touch Dry
5°C: 90 minutes, 10°C: 60 minutes, 20°C: 30 minutes, 30°C: 15 minutes
Touch Dry
30 mins
Recommended Dry Film Thickness
25-40 microns
Recommended Wet Film Thickness
58-93 microns
UN Number
UN1263
Pot Life
5°C: 8 hours, 10°C: 8 hours, 20°C: 8 hours, 30°C: 6 hours
Hard Dry
5°C: 5 hours, 10°C: 4 hours, 20°C: 2 hours, 30°C: 1 hour
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

Price £17.22 (ex. VAT)
In Stock and Available for Delivery