International Intercure 200 is a two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. As a primer for steelwork intended for use in a wide range of aggressive environments,...
International Intergard 400 is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing.
- As a corrosion resistant high build primer/intermediate or finish coat, to provide excellent barrier protection as part of a high performance system in aggressive environments including offshore stuctures, bridges, chemical and petrochemical plants, and power stations.
- The incorporation of plate-like micaceous iron oxide pigment both increases the barrier effect and improves long term overcoating properties of the system, making this material ideally suitable for application in the fabrication shop, prior to shipping, with final overcoating at site.
- Ideally suited as a damage and handling resistant coating which can be factory applied and then overcoated on site with minimum surface preparation.
- Suitable for use in both new construction and industrial maintenance situations.
- Water / Solvent Based
- For Use On
- Application Method
- Airless Spray, Spray, Brush, Roller
- Standard / Ready Mixed
- Single, Two or Three Pack
- Pack Size
- Mixing Ratio
- 5.67 part(s) : 1.00 part(s) by volume
- 5.2m² per litre
- Recommended Thinner/Cleaner
- International GTA220
- Solids by Volume
- 307 g/lt
- Shelf Life (from date of manufacture)
- 12 months minimum at 25°C
- Touch Dry
- 10°C: 6 hours, 15°C: 4 hours, 25°C: 2 hours , 40°C: 1 hour
- Recommended Dry Film Thickness
- 100-150 microns
- Recommended Wet Film Thickness
- 154-231 microns
- UN Number (Activator)
- UN Number (Base)
- Pot Life
- 10°C: 8 hours, 15°C: 5 hours, 25°C: 3 hours, 40°C: 2 hours
- Hard Dry
- 10°C: 24 hours, 15°C: 16 hours, 25°C: 8 hours , 40°C: 5 hours
Be the first to ask a question about this product!
International Interfine 629HS is a low VOC, high performance, two component, isocyanate free crosslinking acrylic finish which provides good durability in terms of colour and gloss retention. Designed as a finish coat for use in both new construction and industrial maintenance. For use in a wide variety of aggressive environments including...
International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems. Coverage Calculator More Information Delivery Info
International Intergard 269 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance. As a blast holding primer suitable for use in immersed and exposed conditions and overcoatable with a wide range of high performance systems. For use at...
International Intergard 400 is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing. Coverage Calculator More Information Delivery Info
International Intergard 410 is a high build, high performance, two component epoxy with excellent chemical and abrasion resistance. Suitable for use as part of a high performance coating system to provide an anti-corrosive barrier in areas where aggressive corrosion conditions prevail. Exclusively available in 4,600+ colours, including...
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties. High solids epoxy intermediate Micaceous Iron Oxide variant for additional barrier protection...
International Intergard 740 is a two component epoxy finish coat. Suitable for brush, roller and spray application Suitable for use in a wide range of environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills, and the power industry Exclusively available in 4,600+ colours, including RAL, British...
International Thinner/Equipment Cleaner GTA220 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating. More Information Delivery Info
International Thinner/Equipment Cleaner GTA822 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating. More Information Delivery Info
International Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings. Now available in 4,600+ colours,...
International Interthane 990 is a two component acrylic polyurethane finish giving excellent durability and long term recoatability. Across the world, people are experiencing flexible application, extended recoat windows and reduced surface preparation costs with International Interthane 990 in both new construction and as a maintenance...
International Interzinc 22 is a two component, rapid recoat, inorganic zinc rich ethyl silicate primer and is part of the Interzinc 22 Series of products that deliver consistently fast re-coating across a choice of 85%, 80%, 77% or 65% minimum zinc content products. The variable zinc levels allow you to tailor your choice of product to meet...
International Interzinc 42 is a two component, metallic zinc primer designed for use in maintenance situations and as a primer at new construction. To be used as part of a coating system for structures in aggressive environments in a wide range of industries. Coverage Calculator More Information Delivery Info
International Interzinc 52 is a two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20. It has been designed to provide excellent corrosion resistance in both maintenance and new construction situations. Coverage Calculator More Information Delivery Info
International Interzinc 72 is a two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance both as a single coat and as a primer for a high performance coating system. Contains 90% zinc by weight in the dry film. Coverage Calculator More Information Delivery Info
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...