- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
International Intergard 405
EGA054
International Intergard 405 is a two component epoxy sealer coat, pigmented with micaceous iron oxide. Formulated on proprietary polymer technology, which provides rapid cure and overcoating, even at low temperatures.
- Provide efficient sealing of zinc silicate primers in order to prevent pinholing of subsequent topcoats
- Can also be used for sealing zinc and aluminium metal spray either as a single coat system or prior to overcoating with a suitable topcoat where required
- Suitable for use as part of a coating system in a range of highly corrosive environments, including offshore structures, petrochemical and chemical plants, bridges, refineries, pulp and paper plants and power stations
**Available for delivery - see Delivery Options below**
Description
International Intergard 405 is a two component epoxy sealer coat, pigmented with micaceous iron oxide. Formulated on proprietary polymer technology, which provides rapid cure and overcoating, even at low temperatures.
Intended Uses:
- To provide efficient sealing of zinc silicate primers in order to prevent pinholing of subsequent topcoats. Can also be used for sealing zinc and aluminium metal spray either as a single coat system or prior to overcoating with a suitable topcoat where required.
- International Intergard 405 is suitable for use as part of a coating system in a range of highly corrosive environments, including offshore structures, petrochemical and chemical plants, bridges, refineries, pulp and paper plants and power stations.
Product Details
EGA054
Data sheet
- Manufacturer
- International
- Water / Solvent Based
- Solvent
- For Use On
- Metal
- Application Method
- Airless Spray, Spray, Brush, Roller
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- 1.5 part(s) : 1 part(s) by volume
- Coverage
- 15.2m² per litre
- Recommended Thinner/Cleaner
- International GTA220
- VOC
- 406 g/kg
- Shelf Life (from date of manufacture)
- 12 months minimum at 25°C
- Touch Dry
- 5°C: 30 minutes, 15°C: 20 minutes, 25°C: 15 minutes, 40°C: 10 minutes
- Recommended Dry Film Thickness
- 25 microns
- Recommended Wet Film Thickness
- 66 microns
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Hard Dry
- 5°C: 4 hours, 15°C: 2 hours, 25°C: 90 minutes, 40°C: 45 minutes
Be the first to ask a question about this product!
