Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
International Intergard 2510 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate, for use on properly prepared surfaces both in new construction and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
International Intergard 2510 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate, for use on properly prepared surfaces both in new construction and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems. International Intergard 2510 is for use in the offshore, petrochemical, chemical, pulp and paper and bridge industries.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Barry shaw on 11/10/2017 |
Question: Hi there this has been applied to steel on a job were doing,what system is compatible for bringing the steel to a finish? It's to be one coat undercoat & a top finish of gloss ral 7047
Is it a certain make of paint or is any paint compatible with it? |
Part of the high performance, immersion grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. Top Features Temperature resistant up to 204ºC Protects steel substrates Very good flexibility Excellent overall chemical resistance Very good abrasion resistance
A heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds. Top Features Good for extended exposure demands Ability to be welded through Heavy-metal free
This is a primer from Jotun that can be applied to steel, aluminium or wood, and features very good adhesion properties on all these substrates. Jotun Pilot QD Primer is an anti-corrosive one component oxidatively drying alkyd coating that is a fast drying, high build, zinc phosphate pigmented product.
Teamac Rust Converter is an excellent product to stop the rusting process and allow rusty surfaces to be overcoated: Easy to apply, and ideal for marine and industrial applications Can be applied to rust in existing damp conditions Suitable for rusted iron or steel Application by brush, roller or airless spray To be overcoated with a...
Sika Permacor 2706 EG is a 2-pack mio-protective coating based on epoxy resin with high mechanical resistance and outstanding adhesion. Tested and official approved primer for Sika Unitherm fire protection systems on steel.
International Intercure 200 is a two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product.
SikaCor EG 1 Rapid is a fast drying version of the standard SikaCor EG 1. It is a two-pack, high-solids, epoxy-based intermediate coat containing micaceous iron oxide. It is designed as a mechanically resistant intermediate coat on steel surfaces exposed to atmospherical conditions, hot-dip galvanized steel, zinc-spray, stainless steel and aluminium.
Nullifire PM020 High Build Alkyd Primer is a fast drying steel primer that provides corrosion protection on structural steel.
Jotun Penguard WF WG is a 'Wintergrade' version of Jotun Penguard WF to aid application in lower temperatures and to provide faster drying and curing times. Jotun Penguard WF WG is a two component, anti-corrosive water borne epoxy coating that is a versatile, fast drying product containing flash rust inhibitors.
A durable and high performance acrylic coating for use where excellent weathering properties and chemical resistance are required. Use as a direct-to-metal acrylic coating for structural steel, as well as other exterior and interior uses. Top Features Smooth, attractive, high build finish Excellent corrosion protection Meets most VOC...
Zingalufer, previously known as Alufer N, an intermediate layer or topcoat for existing layers of Zinga in immersed or chemical environments, such as ship hulls and sewage works, providing a protective seal against salt and chemical exposure. Apply by brush, roller, conventional sprayers or aireless spray One pack system Dry in as little...
Jotun Penguard Express CF is a two component polyamide cured, colour stable epoxy primer/finish coating that is fast drying, high solids and high build. It can be used as primer, mid coat or finish coat in atmospheric environments and is specially designed for new construction where fast dry to handle and over coating times are required.
Rust-Oleum Hard Hat 2185/1085 Galva Zinc is the No.1 high zinc content coating providing superior protection and durability for metals exposed to the elements or adverse artificial conditions. Can be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas. 90% zinc content, touch dry...
Jotun Alkydprimer is a one component, single pack oxidatively drying alkyd coating that can be used as primer or mid coat in atmospheric environments. Suitable for properly prepared carbon steel, aluminium and wooden substrates, this alkyd primer is deal for a wide range of industrial structures or for touch up areas in the marine industry.
A fast drying, water based, anti-corrosive primer for temporary metal protection intended as the first coat in shop coating applications and provides the required basic protection following metal fabrication and assembly operations.
Zingaceram HS, a high solid 2 pack intermediate coat to be applied as a sealer over Zinga. The coating has been used on both structural steelwork (for multi-million pound projects) and on sub-sea pipelines. 2 pack system Seals Zinga with good compatibility Apply by brush, roller, conventional sprayer or by airless spraying High solid...
